set -e
test -L old/xenolinux-2.4.16-sparse/include/asm-xeno/hypervisor-ifs
rm old/xenolinux-2.4.16-sparse/include/asm-xeno/hypervisor-ifs
-test -L xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hypervisor-ifs
-rm xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hypervisor-ifs
(find -depth -type d -print | xargs -r rmdir 2>/dev/null) || true
exit 0
mkdir -p old/xenolinux-2.4.16-sparse/include
mkdir -p old/xenolinux-2.4.16-sparse/include/asm-xeno
ln -s ../../../xen-2.4.16/include/hypervisor-ifs old/xenolinux-2.4.16-sparse/include/asm-xeno/hypervisor-ifs
-mkdir -p xenolinux-2.4.21-pre4-sparse
-mkdir -p xenolinux-2.4.21-pre4-sparse/include
-mkdir -p xenolinux-2.4.21-pre4-sparse/include/asm-xeno
-ln -s ../../../xen/include/hypervisor-ifs xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hypervisor-ifs
(find -depth -type d -print | xargs -r rmdir 2>/dev/null) || true
exit 0
3e5a4e65ibVQmwlOn0j3sVH_j_6hAg xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/hypervisor.c
3e5a4e65RMGcuA-HCn3-wNx3fFQwdg xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/i386_ksyms.c
3e5a4e65JfSHwduNJO6j-upYnjoWLA xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/i387.c
-3e5a4e65tzCYKTX26zdI8rk2m48BDA xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/init_task.c
3e5a4e65MEvZhlr070sK5JsfAQlv7Q xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/ioport.c
3e5a4e653U6cELGv528IxOLHvCq8iA xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/irq.c
3e5a4e65muT6SU3ck47IP87Q7Ti5hA xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/ldt.c
3e5a4e65IGt3WwQDNiL4h-gYWgNTWQ xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/process.c
-3e5a4e65vXUggUHe9b_D9q0CNcZmQg xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/ptrace.c
-3e5a4e66StFP0OPSNngVwPJ4cJDy4g xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/semaphore.c
3e5a4e66tR-qJMLj3MppcKqmvuI2XQ xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/setup.c
3e5a4e66fWSTagLGU2P8BGFGRjhDiw xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/signal.c
-3e5a4e66Id8AWFANwLRFP4mKJgIFQw xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/sys_i386.c
3e5a4e66N__lUXNwzQ-eADRzK9LXuQ xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/time.c
3e5a4e66aHCbQ_F5QZ8VeyikLmuRZQ xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/traps.c
3e5a4e66-9_NczrVMbuQkoSLyXckIw xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/Makefile
-3e5a4e66pZtp3RawntDpdofnJEvHIg xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/checksum.S
-3e5a4e660Zju423CmC6q_-ZdObYhuA xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/dec_and_lock.c
3e5a4e6637ZDk0BvFEC-aFQs599-ng xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/delay.c
-3e5a4e66Cf-sjHkzP95oIJ6hBC1pOA xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/getuser.S
-3e5a4e66s_LxC8VI5vqmr-TPOdJYsw xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/iodebug.c
-3e5a4e667pxnNndXVcVxVNBvZezxhw xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/memcpy.c
-3e5a4e66MHYcXyO9DndD8k0DDBovYw xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/mmx.c
-3e5a4e669xZJQRPtO8oiRIqMwChrLg xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/old-checksum.c
-3e5a4e66RzO4JzKOAraCe2dnQ5m-yw xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/strstr.c
-3e5a4e66us6VmRaduHUnWiKcAONyLA xenolinux-2.4.21-pre4-sparse/arch/xeno/lib/usercopy.c
3e5a4e66croVgpcJyJuF2ycQw0HuJw xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/Makefile
-3e5a4e661LP_6AdxThMuysfcYtOexA xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/extable.c
3e5a4e66l8Q5Tv-6B3lQIRmaVbFPzg xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/fault.c
3e5a4e66TyNNUEXkr5RxqvQhXK1MQA xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/get_unmapped_area.c
3e5a4e668SE9rixq4ahho9rNhLUUFQ xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/hypervisor.c
3e5a4e661gLzzff25pJooKIIWe7IWg xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/init.c
3e5a4e66U45cAIoHmxg0y1e1XhzVCA xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/mmu_context.c
-3e5a4e66_jLCqAOBvqAy5N4mP7hmBA xenolinux-2.4.21-pre4-sparse/arch/xeno/mm/pageattr.c
3e5a4e66qRlSTcjafidMB6ulECADvg xenolinux-2.4.21-pre4-sparse/arch/xeno/vmlinux.lds
3e5a4e668yELUdtr3HiJZBIqxqUyuA xenolinux-2.4.21-pre4-sparse/drivers/block/Config.in
3e5a4e66mrtlmV75L1tjKDg8RaM5gA xenolinux-2.4.21-pre4-sparse/drivers/block/ll_rw_blk.c
3e5a4e66rw65CxyolW9PKz4GG42RcA xenolinux-2.4.21-pre4-sparse/drivers/char/tty_io.c
3e5a4e669uzIE54VwucPYtGwXLAbzA xenolinux-2.4.21-pre4-sparse/fs/exec.c
-3e5a4e66HUJwJfJBBOilIN7LeL0twg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/a.out.h
-3e5a4e66nv3Esm5N8FS5r0qs-l7A0w xenolinux-2.4.21-pre4-sparse/include/asm-xeno/apic.h
-3e5a4e66BHReK8U7xl4qqZMXvFXihQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/apicdef.h
-3e5a4e668V7Eo08_6qmVoevzFrlxGQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/atomic.h
-3e5a4e66FNm4qKYGsIMdX6DGJ1pI1g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/bitops.h
-3e5a4e66zkP-aEQkEtznyyp-e7tUGA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/boot.h
3e5a4e66wbeCpsJgVf_U8Jde-CNcsA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/bugs.h
-3e5a4e66wTE9HEEjsnOHrijDB8iXrQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/byteorder.h
-3e5a4e66VqboK-qHV-HxmSflMh4VqQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/cache.h
-3e5a4e66bTVzeqJUJQiu67FWoHM5iw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/checksum.h
-3e5a4e66JVArkZ-0_pav3AsvKbftdw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/cpufeature.h
-3e5a4e66cCx28DaXo1U_nKvVX-5Y5w xenolinux-2.4.21-pre4-sparse/include/asm-xeno/current.h
-3e5a4e66o7NZjoJZjzJa-Z7XcGmGqg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/debugreg.h
-3e5a4e66rpzD2c7pNKF0XLbHzxb24A xenolinux-2.4.21-pre4-sparse/include/asm-xeno/delay.h
3e5a4e66HdSkvIV6SJ1evG_xmTmXHA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/desc.h
-3e5a4e66GP6AL7wpHyxcsHOH4cJ4BQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/div64.h
-3e5a4e66wJ9hmUtY2rLWliznHdjWaw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/dma.h
-3e5a4e667P_1mO6v1YFRZ-ocfpiyVQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/elf.h
-3e5a4e66qeYk1odm2esnGypmiMcxqw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/errno.h
-3e5a4e663pDK4oQnfbuT38CR04cXDQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/fcntl.h
3e5a4e66SYp_UpAVcF8Lc1wa3Qtgzw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/fixmap.h
-3e5a4e67fsayUJFE3A24CKZoUDI88A xenolinux-2.4.21-pre4-sparse/include/asm-xeno/floppy.h
-3e5a4e67uPmwPbjvF7YGsG2hX-3oBQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hardirq.h
-3e5a4e67P_6RRoCzUiQt_gyx6lmyWw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hdreg.h
3e5a4e67w_DWgjIJ17Tlossu1LGujQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/highmem.h
3e5a4e67YtcyDLQsShhCfQwPSELfvA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hw_irq.h
-3e00b957NB9Iz667rjRZg5YAJqoKCg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hypervisor-ifs
3e5a4e677VBavzM1UZIEcH1B-RlXMA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/hypervisor.h
-3e5a4e679TYbXAUiURvTeX4cFb1RlQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/i387.h
-3e5a4e672eNAzAKUZsefsPdmsH19hA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ide.h
-3e5a4e67XHl6b9C1Oqv79FiE1T3ybg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/init.h
3e5a4e67Ulv-Ll8Zp4j2GwMwQ8aAXQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h
-3e5a4e67cWGE9V1O6DSwvj5KtkY04g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io_apic.h
-3e5a4e67-vXNELtSK-qDSYyK55febg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ioctl.h
-3e5a4e67iqnkteX3g1IFQ-0Hf-vyuA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ioctls.h
-3e5a4e674l2NZF3klG30JX_auXUBgA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ipc.h
-3e5a4e678dxUg9lvKOXvH1s5a9GNsA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ipcbuf.h
3e5a4e673p7PEOyHFm3nHkYX6HQYBg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/irq.h
-3e5a4e67nfnw10Wsugp5ZeMYFO_Eeg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/keyboard.h
-3e5a4e67FbgZ92JO9Vp2CKlW6z7wjA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/kmap_types.h
-3e5a4e674VIvXJxlOtz7LjtNAJttAA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ldt.h
-3e5a4e67X2GwDXstxQeuIyr65hdOig xenolinux-2.4.21-pre4-sparse/include/asm-xeno/linux_logo.h
-3e5a4e67mLXkDcU-aaeMByYb1-3v7Q xenolinux-2.4.21-pre4-sparse/include/asm-xeno/locks.h
-3e5a4e67g8B4DjzsIajoy1_mlxlvLg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/math_emu.h
-3e5a4e67J6JsiPWb0AwWZzQcOLbKKw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mc146818rtc.h
-3e5a4e67otTxTEz6CA4vVHE-CFLGkQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mca_dma.h
-3e5a4e67hSfhasW1McVONBMITBY28g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mman.h
3e5a4e67zoNch27qYhEBpr2k6SABOg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mmu.h
3e5a4e678ddsQOpbSiRdy1GRcDc9WA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mmu_context.h
-3e5a4e67YQ_cLDcJjIsd8XTCk3w4rg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mmx.h
-3e5a4e67Zv1yObwNLd_9AYbyGTTvSw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/module.h
-3e5a4e67C-czbgW6YxgEbJG1e9aPGg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mpspec.h
-3e5a4e67swa8teSCnQDQvpV90xYiZQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/msgbuf.h
-3e5a4e67U1TsB9azleujfFZm3E5i3w xenolinux-2.4.21-pre4-sparse/include/asm-xeno/msr.h
-3e5a4e67f6dvHFEisaZ4wCR2t3a0yw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/mtrr.h
-3e5a4e67Kd-KWcgJON9dfcJEQD9hdg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/namei.h
3e5a4e67mnQfh-R8KcQCaVo2Oho6yg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/page.h
-3e5a4e67IYaS0RnLo3SntreGd59gMA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/param.h
-3e5a4e67nvdHRk38knQeDl-0Z2j6_Q xenolinux-2.4.21-pre4-sparse/include/asm-xeno/parport.h
3e5a4e67uTYU5oEnIDjxuaez8njjqg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/pgalloc.h
3e5a4e67X7JyupgdYkgDX19Huj2sAw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/pgtable-2level.h
3e5a4e67w3ckNdrTEgqiSiYYAYMwOQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/pgtable-3level.h
3e5a4e67gr4NLGtQ5CvSLimMYZlkOA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/pgtable.h
-3e5a4e671OnIMxuFE59yynI-qvwKCA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/poll.h
-3e5a4e67o7FLcNPHjwyw5vb01EQTCg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/posix_types.h
3e5a4e676uK4xErTBDH6XJREn9LSyg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/processor.h
3e5a4e67AJPjW-zL7p-xWuA6IVeH1g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ptrace.h
-3e5a4e67tIfXJYRQFxfRbcpZ25vqfw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/resource.h
-3e5a4e68E-U7HbKdTBaYoo3ZISdxuQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/rwlock.h
-3e5a4e68unR4ktSClycraOPanwxvTg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/rwsem.h
-3e5a4e68DATgqBYbF9W2Pkw5fGZBRg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/scatterlist.h
3e5a4e68uJz-xI0IBVMD7xRLQKJDFg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/segment.h
-3e5a4e68Ug8hqChUpD2m_IDQSiu8jw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/semaphore.h
-3e5a4e68uFNNH3YQvZS1EnL0v_E6ew xenolinux-2.4.21-pre4-sparse/include/asm-xeno/sembuf.h
-3e5a4e689R_c0pr8Ycb-w6zveleWEw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/serial.h
-3e5a4e682D6yseOVKoJIx6HafkEKJw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/setup.h
-3e5a4e680_gLjMSi1Ql0nUnqCoQSyQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/shmbuf.h
-3e5a4e68PFVCbzUszQ4anRN8iZ1DUg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/shmparam.h
-3e5a4e689rAyWPwrwdvtJEkrtVw1rA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/sigcontext.h
-3e5a4e68D7dXWzciOKbyG1G3l3yt0w xenolinux-2.4.21-pre4-sparse/include/asm-xeno/siginfo.h
-3e5a4e68soo0VsYXn1HYv2XeUnlxgw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/signal.h
3e5a4e68Nfdh6QcOKUTGCaYkf2LmYA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/smp.h
-3e5a4e688pv8zI1Z3wciLUik3c2iEw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/smplock.h
-3e5a4e68jaQZMOApQVZiq7T_gGPZhw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/socket.h
-3e5a4e68wlnX8Huhsl0gd7VgmiA8uA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/sockios.h
-3e5a4e68tuqUkZ3kyZGk6BZ1hrkXyw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/softirq.h
-3e5a4e68viR5sAz1SvKnPNrpKmlAZA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/spinlock.h
-3e5a4e68nUxBYfOOLm0_cZN7XM-3LQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/stat.h
-3e5a4e68my8BhpsHYBD63VUrxLXRCg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/statfs.h
-3e5a4e68W6piFzx4c4kiqwNB-h8PbQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/string-486.h
-3e5a4e68gFzDdQZEy91vkcdKWubf2g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/string.h
3e5a4e68mTr0zcp9SXDbnd-XLrrfxw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/system.h
-3e5a4e686Tful7frKeVbjeeWZ4S0nA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/termbits.h
-3e5a4e68fZcskF52zTGHdiF_yoVBiw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/termios.h
-3e5a4e68t8oGxTdC3i40nPjFwW00_g xenolinux-2.4.21-pre4-sparse/include/asm-xeno/timex.h
-3e5a4e685uCbimBjS_2iGxUqptPYiQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/tlb.h
-3e5a4e68Elybq23T6RnEt6vopg3mxg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/types.h
-3e5a4e68NeADbbaqoo4emjpU5xcaqA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/uaccess.h
-3e5a4e68HMMGyb6iBvG-qVbd9hODaQ xenolinux-2.4.21-pre4-sparse/include/asm-xeno/ucontext.h
-3e5a4e68m2MrAb54gFw8n-ZGNEu-Fw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/unaligned.h
-3e5a4e68vggReonfTJ1gdzYjFaOSKw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/unistd.h
-3e5a4e68QPC4T0aOA61QgK2SGDPVVA xenolinux-2.4.21-pre4-sparse/include/asm-xeno/user.h
-3e5a4e68g2boOp0d45bjtwugxQ8zNw xenolinux-2.4.21-pre4-sparse/include/asm-xeno/vga.h
-3e5a4e68AB-TTHj1oXtqVJvUo9jzIg xenolinux-2.4.21-pre4-sparse/include/asm-xeno/xor.h
3e5a4e68WLX3B8owTvktP3HHOtznPQ xenolinux-2.4.21-pre4-sparse/include/linux/major.h
3e5a4e686V0nioX2ZpFf056sgvdiQw xenolinux-2.4.21-pre4-sparse/include/linux/sunrpc/debug.h
3e5a4e68W_hpMlM3u_-QOKMp3gzcwQ xenolinux-2.4.21-pre4-sparse/init/do_mounts.c
3e5a4e68TJJavrunYwTAnLRSBxSYqQ xenolinux-2.4.21-pre4-sparse/kernel/panic.c
+3e6e7c1efbQe93xCvOpOVCnXTMmQ5w xenolinux-2.4.21-pre4-sparse/mkbuildtree
3e5a4e68GxCIaFH4sy01v1wjapetaA xenolinux-2.4.21-pre4-sparse/mm/memory.c
3e5a4e681xMPdF9xCMwpyfuYMySU5g xenolinux-2.4.21-pre4-sparse/mm/mremap.c
3e5a4e683HKVU-sxtagrDasRB8eBVw xenolinux-2.4.21-pre4-sparse/mm/swapfile.c
+++ /dev/null
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
-static struct signal_struct init_signals = INIT_SIGNALS;
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-/*
- * Initial task structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry..
- */
-union task_union init_task_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_TASK(init_task_union.task) };
-
-/*
- * per-CPU TSS segments. Threads are completely 'soft' on Linux,
- * no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data.cacheline_aligned
- * section. Since TSS's are completely CPU-local, we want them
- * on exact cacheline boundaries, to eliminate cacheline ping-pong.
- */
-struct tss_struct init_tss[NR_CPUS] __cacheline_aligned = { [0 ... NR_CPUS-1] = INIT_TSS };
-
+++ /dev/null
-/* ptrace.c */
-/* By Ross Biro 1/23/92 */
-/*
- * Pentium III FXSR, SSE support
- * Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/debugreg.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/* determines which flags the user has access to. */
-/* 1 = access 0 = no access */
-#define FLAG_MASK 0x00044dd5
-
-/* set's the trap flag. */
-#define TRAP_FLAG 0x100
-
-/*
- * Offset of eflags on child stack..
- */
-#define EFL_OFFSET ((EFL-2)*4-sizeof(struct pt_regs))
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task->thread.esp0;
- stack += offset;
- return (*((int *)stack));
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
- unsigned long data)
-{
- unsigned char * stack;
-
- stack = (unsigned char *) task->thread.esp0;
- stack += offset;
- *(unsigned long *) stack = data;
- return 0;
-}
-
-static int putreg(struct task_struct *child,
- unsigned long regno, unsigned long value)
-{
- switch (regno >> 2) {
- case FS:
- if (value && (value & 3) != 3)
- return -EIO;
- child->thread.fs = value;
- return 0;
- case GS:
- if (value && (value & 3) != 3)
- return -EIO;
- child->thread.gs = value;
- return 0;
- case DS:
- case ES:
- if (value && (value & 3) != 3)
- return -EIO;
- value &= 0xffff;
- break;
- case SS:
- case CS:
- if ((value & 3) != 3)
- return -EIO;
- value &= 0xffff;
- break;
- case EFL:
- value &= FLAG_MASK;
- value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK;
- break;
- }
- if (regno > GS*4)
- regno -= 2*4;
- put_stack_long(child, regno - sizeof(struct pt_regs), value);
- return 0;
-}
-
-static unsigned long getreg(struct task_struct *child,
- unsigned long regno)
-{
- unsigned long retval = ~0UL;
-
- switch (regno >> 2) {
- case FS:
- retval = child->thread.fs;
- break;
- case GS:
- retval = child->thread.gs;
- break;
- case DS:
- case ES:
- case SS:
- case CS:
- retval = 0xffff;
- /* fall through */
- default:
- if (regno > GS*4)
- regno -= 2*4;
- regno = regno - sizeof(struct pt_regs);
- retval &= get_stack_long(child, regno);
- }
- return retval;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
- long tmp;
-
- tmp = get_stack_long(child, EFL_OFFSET) & ~TRAP_FLAG;
- put_stack_long(child, EFL_OFFSET, tmp);
-}
-
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
-{
- struct task_struct *child;
- struct user * dummy = NULL;
- int i, ret;
-
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
- switch (request) {
- /* when I and D space are separate, these will need to be fixed. */
- case PTRACE_PEEKTEXT: /* read word at location addr. */
- case PTRACE_PEEKDATA: {
- unsigned long tmp;
- int copied;
-
- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
- ret = -EIO;
- if (copied != sizeof(tmp))
- break;
- ret = put_user(tmp,(unsigned long *) data);
- break;
- }
-
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- tmp = 0; /* Default return condition */
- if(addr < FRAME_SIZE*sizeof(long))
- tmp = getreg(child, addr);
- if(addr >= (long) &dummy->u_debugreg[0] &&
- addr <= (long) &dummy->u_debugreg[7]){
- addr -= (long) &dummy->u_debugreg[0];
- addr = addr >> 2;
- tmp = child->thread.debugreg[addr];
- }
- ret = put_user(tmp,(unsigned long *) data);
- break;
- }
-
- /* when I and D space are separate, this will have to be fixed. */
- case PTRACE_POKETEXT: /* write the word at location addr. */
- case PTRACE_POKEDATA:
- ret = 0;
- if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
- break;
- ret = -EIO;
- break;
-
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < FRAME_SIZE*sizeof(long)) {
- ret = putreg(child, addr, data);
- break;
- }
- /* We need to be very careful here. We implicitly
- want to modify a portion of the task_struct, and we
- have to be selective about what portions we allow someone
- to modify. */
-
- ret = -EIO;
- if(addr >= (long) &dummy->u_debugreg[0] &&
- addr <= (long) &dummy->u_debugreg[7]){
-
- if(addr == (long) &dummy->u_debugreg[4]) break;
- if(addr == (long) &dummy->u_debugreg[5]) break;
- if(addr < (long) &dummy->u_debugreg[4] &&
- ((unsigned long) data) >= TASK_SIZE-3) break;
-
- if(addr == (long) &dummy->u_debugreg[7]) {
- data &= ~DR_CONTROL_RESERVED;
- for(i=0; i<4; i++)
- if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
- goto out_tsk;
- }
-
- addr -= (long) &dummy->u_debugreg;
- addr = addr >> 2;
- child->thread.debugreg[addr] = data;
- ret = 0;
- }
- break;
-
- case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
- case PTRACE_CONT: { /* restart after signal. */
- long tmp;
-
- ret = -EIO;
- if ((unsigned long) data > _NSIG)
- break;
- if (request == PTRACE_SYSCALL)
- child->ptrace |= PT_TRACESYS;
- else
- child->ptrace &= ~PT_TRACESYS;
- child->exit_code = data;
- /* make sure the single step bit is not set. */
- tmp = get_stack_long(child, EFL_OFFSET) & ~TRAP_FLAG;
- put_stack_long(child, EFL_OFFSET,tmp);
- wake_up_process(child);
- ret = 0;
- break;
- }
-
-/*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
- case PTRACE_KILL: {
- long tmp;
-
- ret = 0;
- if (child->state == TASK_ZOMBIE) /* already dead */
- break;
- child->exit_code = SIGKILL;
- /* make sure the single step bit is not set. */
- tmp = get_stack_long(child, EFL_OFFSET) & ~TRAP_FLAG;
- put_stack_long(child, EFL_OFFSET, tmp);
- wake_up_process(child);
- break;
- }
-
- case PTRACE_SINGLESTEP: { /* set the trap flag. */
- long tmp;
-
- ret = -EIO;
- if ((unsigned long) data > _NSIG)
- break;
- child->ptrace &= ~PT_TRACESYS;
- if ((child->ptrace & PT_DTRACE) == 0) {
- /* Spurious delayed TF traps may occur */
- child->ptrace |= PT_DTRACE;
- }
- tmp = get_stack_long(child, EFL_OFFSET) | TRAP_FLAG;
- put_stack_long(child, EFL_OFFSET, tmp);
- child->exit_code = data;
- /* give it a chance to run. */
- wake_up_process(child);
- ret = 0;
- break;
- }
-
- case PTRACE_DETACH:
- /* detach a process that was attached. */
- ret = ptrace_detach(child, data);
- break;
-
- case PTRACE_GETREGS: { /* Get all gp regs from the child. */
- if (!access_ok(VERIFY_WRITE, (unsigned *)data, FRAME_SIZE*sizeof(long))) {
- ret = -EIO;
- break;
- }
- for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
- __put_user(getreg(child, i),(unsigned long *) data);
- data += sizeof(long);
- }
- ret = 0;
- break;
- }
-
- case PTRACE_SETREGS: { /* Set all gp regs in the child. */
- unsigned long tmp;
- if (!access_ok(VERIFY_READ, (unsigned *)data, FRAME_SIZE*sizeof(long))) {
- ret = -EIO;
- break;
- }
- for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
- __get_user(tmp, (unsigned long *) data);
- putreg(child, i, tmp);
- data += sizeof(long);
- }
- ret = 0;
- break;
- }
-
- case PTRACE_GETFPREGS: { /* Get the child FPU state. */
- if (!access_ok(VERIFY_WRITE, (unsigned *)data,
- sizeof(struct user_i387_struct))) {
- ret = -EIO;
- break;
- }
- ret = 0;
- if ( !child->used_math )
- load_empty_fpu(child);
- get_fpregs((struct user_i387_struct *)data, child);
- break;
- }
-
- case PTRACE_SETFPREGS: { /* Set the child FPU state. */
- if (!access_ok(VERIFY_READ, (unsigned *)data,
- sizeof(struct user_i387_struct))) {
- ret = -EIO;
- break;
- }
- child->used_math = 1;
- set_fpregs(child, (struct user_i387_struct *)data);
- ret = 0;
- break;
- }
-
- case PTRACE_GETFPXREGS: { /* Get the child extended FPU state. */
- if (!access_ok(VERIFY_WRITE, (unsigned *)data,
- sizeof(struct user_fxsr_struct))) {
- ret = -EIO;
- break;
- }
- if ( !child->used_math )
- load_empty_fpu(child);
- ret = get_fpxregs((struct user_fxsr_struct *)data, child);
- break;
- }
-
- case PTRACE_SETFPXREGS: { /* Set the child extended FPU state. */
- if (!access_ok(VERIFY_READ, (unsigned *)data,
- sizeof(struct user_fxsr_struct))) {
- ret = -EIO;
- break;
- }
- child->used_math = 1;
- ret = set_fpxregs(child, (struct user_fxsr_struct *)data);
- break;
- }
-
- case PTRACE_SETOPTIONS: {
- if (data & PTRACE_O_TRACESYSGOOD)
- child->ptrace |= PT_TRACESYSGOOD;
- else
- child->ptrace &= ~PT_TRACESYSGOOD;
- ret = 0;
- break;
- }
-
- default:
- ret = -EIO;
- break;
- }
-out_tsk:
- free_task_struct(child);
-out:
- unlock_kernel();
- return ret;
-}
-
-asmlinkage void syscall_trace(void)
-{
- if ((current->ptrace & (PT_PTRACED|PT_TRACESYS)) !=
- (PT_PTRACED|PT_TRACESYS))
- return;
- /* the 0x80 provides a way for the tracing parent to distinguish
- between a syscall stop and SIGTRAP delivery */
- current->exit_code = SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0);
- current->state = TASK_STOPPED;
- notify_parent(current, SIGCHLD);
- schedule();
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
+++ /dev/null
-/*
- * i386 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Portions Copyright 1999 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@redhat.com>
- */
-#include <linux/config.h>
-#include <linux/sched.h>
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-static spinlock_t semaphore_lock = SPIN_LOCK_UNLOCKED;
-
-void __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
- wake_up(&sem->wait);
-}
-
-int __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers ++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock. The
- * "-1" is because we're still hoping to get
- * the lock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-int __down_trylock(struct semaphore * sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers, &sem->count))
- wake_up(&sem->wait);
-
- spin_unlock_irqrestore(&semaphore_lock, flags);
- return 1;
-}
-
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- *
- * %ecx contains the semaphore pointer on entry. Save the C-clobbered
- * registers (%eax, %edx and %ecx) except %eax when used as a return
- * value..
- */
-asm(
-".text\n"
-".align 4\n"
-".globl __down_failed\n"
-"__down_failed:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %eax\n\t"
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
- "popl %eax\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".text\n"
-".align 4\n"
-".globl __down_failed_interruptible\n"
-"__down_failed_interruptible:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down_interruptible\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".text\n"
-".align 4\n"
-".globl __down_failed_trylock\n"
-"__down_failed_trylock:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down_trylock\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".text\n"
-".align 4\n"
-".globl __up_wakeup\n"
-"__up_wakeup:\n\t"
- "pushl %eax\n\t"
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __up\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
- "popl %eax\n\t"
- "ret"
-);
-
-/*
- * rw spinlock fallbacks
- */
-#if defined(CONFIG_SMP)
-asm(
-".text\n"
-".align 4\n"
-".globl __write_lock_failed\n"
-"__write_lock_failed:\n\t"
- LOCK "addl $" RW_LOCK_BIAS_STR ",(%eax)\n"
-"1: rep; nop\n\t"
- "cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
- "jne 1b\n\t"
- LOCK "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
- "jnz __write_lock_failed\n\t"
- "ret"
-);
-
-asm(
-".text\n"
-".align 4\n"
-".globl __read_lock_failed\n"
-"__read_lock_failed:\n\t"
- LOCK "incl (%eax)\n"
-"1: rep; nop\n\t"
- "cmpl $1,(%eax)\n\t"
- "js 1b\n\t"
- LOCK "decl (%eax)\n\t"
- "js __read_lock_failed\n\t"
- "ret"
-);
-#endif
+++ /dev/null
-/*
- * linux/arch/i386/kernel/sys_i386.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/i386
- * platform.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-
-#include <asm/uaccess.h>
-#include <asm/ipc.h>
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long * fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
-/* common code for old and new mmaps */
-static inline long do_mmap2(
- unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- int error = -EBADF;
- struct file * file = NULL;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
- down_write(¤t->mm->mmap_sem);
- error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
- up_write(¤t->mm->mmap_sem);
-
- if (file)
- fput(file);
-out:
- return error;
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
- unsigned long addr;
- unsigned long len;
- unsigned long prot;
- unsigned long flags;
- unsigned long fd;
- unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
- struct mmap_arg_struct a;
- int err = -EFAULT;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
-
- err = -EINVAL;
- if (a.offset & ~PAGE_MASK)
- goto out;
-
- err = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
- return err;
-}
-
-
-extern asmlinkage int sys_select(int, fd_set *, fd_set *, fd_set *, struct timeval *);
-
-struct sel_arg_struct {
- unsigned long n;
- fd_set *inp, *outp, *exp;
- struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
- struct sel_arg_struct a;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- return -EFAULT;
- /* sys_select() does the appropriate kernel locking */
- return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
- int third, void *ptr, long fifth)
-{
- int version, ret;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- switch (call) {
- case SEMOP:
- return sys_semop (first, (struct sembuf *)ptr, second);
- case SEMGET:
- return sys_semget (first, second, third);
- case SEMCTL: {
- union semun fourth;
- if (!ptr)
- return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
- return -EFAULT;
- return sys_semctl (first, second, third, fourth);
- }
-
- case MSGSND:
- return sys_msgsnd (first, (struct msgbuf *) ptr,
- second, third);
- case MSGRCV:
- switch (version) {
- case 0: {
- struct ipc_kludge tmp;
- if (!ptr)
- return -EINVAL;
-
- if (copy_from_user(&tmp,
- (struct ipc_kludge *) ptr,
- sizeof (tmp)))
- return -EFAULT;
- return sys_msgrcv (first, tmp.msgp, second,
- tmp.msgtyp, third);
- }
- default:
- return sys_msgrcv (first,
- (struct msgbuf *) ptr,
- second, fifth, third);
- }
- case MSGGET:
- return sys_msgget ((key_t) first, second);
- case MSGCTL:
- return sys_msgctl (first, second, (struct msqid_ds *) ptr);
-
- case SHMAT:
- switch (version) {
- default: {
- ulong raddr;
- ret = sys_shmat (first, (char *) ptr, second, &raddr);
- if (ret)
- return ret;
- return put_user (raddr, (ulong *) third);
- }
- case 1: /* iBCS2 emulator entry point */
- if (!segment_eq(get_fs(), get_ds()))
- return -EINVAL;
- return sys_shmat (first, (char *) ptr, second, (ulong *) third);
- }
- case SHMDT:
- return sys_shmdt ((char *)ptr);
- case SHMGET:
- return sys_shmget (first, second, third);
- case SHMCTL:
- return sys_shmctl (first, second,
- (struct shmid_ds *) ptr);
- default:
- return -EINVAL;
- }
-}
-
-/*
- * Old cruft
- */
-asmlinkage int sys_uname(struct old_utsname * name)
-{
- int err;
- if (!name)
- return -EFAULT;
- down_read(&uts_sem);
- err=copy_to_user(name, &system_utsname, sizeof (*name));
- up_read(&uts_sem);
- return err?-EFAULT:0;
-}
-
-asmlinkage int sys_olduname(struct oldold_utsname * name)
-{
- int error;
-
- if (!name)
- return -EFAULT;
- if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
- return -EFAULT;
-
- down_read(&uts_sem);
-
- error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
- error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
- error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
- error |= __put_user(0,name->release+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
- error |= __put_user(0,name->version+__OLD_UTS_LEN);
- error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
- error |= __put_user(0,name->machine+__OLD_UTS_LEN);
-
- up_read(&uts_sem);
-
- error = error ? -EFAULT : 0;
-
- return error;
-}
-
-asmlinkage int sys_pause(void)
-{
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- return -ERESTARTNOHAND;
-}
-
+++ /dev/null
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Pentium Pro/II routines:
- * Alexander Kjeldaas <astor@guardian.no>
- * Finn Arne Gangstad <finnag@guardian.no>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception
- * handling.
- * Andi Kleen, add zeroing on error
- * converted to pure assembler
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <asm/errno.h>
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-/*
-unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
- */
-
-.text
-.align 4
-.globl csum_partial
-
-#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
-
- /*
- * Experiments with Ethernet and SLIP connections show that buff
- * is aligned on either a 2-byte or 4-byte boundary. We get at
- * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
- * Fortunately, it is easy to convert 2-byte alignment to 4-byte
- * alignment for the unrolled loop.
- */
-csum_partial:
- pushl %esi
- pushl %ebx
- movl 20(%esp),%eax # Function arg: unsigned int sum
- movl 16(%esp),%ecx # Function arg: int len
- movl 12(%esp),%esi # Function arg: unsigned char *buff
- testl $3, %esi # Check alignment.
- jz 2f # Jump if alignment is ok.
- testl $1, %esi # Check alignment.
- jz 10f # Jump if alignment is boundary of 2bytes.
-
- # buf is odd
- dec %ecx
- jl 8f
- movzbl (%esi), %ebx
- adcl %ebx, %eax
- roll $8, %eax
- inc %esi
- testl $2, %esi
- jz 2f
-10:
- subl $2, %ecx # Alignment uses up two bytes.
- jae 1f # Jump if we had at least two bytes.
- addl $2, %ecx # ecx was < 2. Deal with it.
- jmp 4f
-1: movw (%esi), %bx
- addl $2, %esi
- addw %bx, %ax
- adcl $0, %eax
-2:
- movl %ecx, %edx
- shrl $5, %ecx
- jz 2f
- testl %esi, %esi
-1: movl (%esi), %ebx
- adcl %ebx, %eax
- movl 4(%esi), %ebx
- adcl %ebx, %eax
- movl 8(%esi), %ebx
- adcl %ebx, %eax
- movl 12(%esi), %ebx
- adcl %ebx, %eax
- movl 16(%esi), %ebx
- adcl %ebx, %eax
- movl 20(%esi), %ebx
- adcl %ebx, %eax
- movl 24(%esi), %ebx
- adcl %ebx, %eax
- movl 28(%esi), %ebx
- adcl %ebx, %eax
- lea 32(%esi), %esi
- dec %ecx
- jne 1b
- adcl $0, %eax
-2: movl %edx, %ecx
- andl $0x1c, %edx
- je 4f
- shrl $2, %edx # This clears CF
-3: adcl (%esi), %eax
- lea 4(%esi), %esi
- dec %edx
- jne 3b
- adcl $0, %eax
-4: andl $3, %ecx
- jz 7f
- cmpl $2, %ecx
- jb 5f
- movw (%esi),%cx
- leal 2(%esi),%esi
- je 6f
- shll $16,%ecx
-5: movb (%esi),%cl
-6: addl %ecx,%eax
- adcl $0, %eax
-7:
- testl $1, 12(%esp)
- jz 8f
- roll $8, %eax
-8:
- popl %ebx
- popl %esi
- ret
-
-#else
-
-/* Version for PentiumII/PPro */
-
-csum_partial:
- pushl %esi
- pushl %ebx
- movl 20(%esp),%eax # Function arg: unsigned int sum
- movl 16(%esp),%ecx # Function arg: int len
- movl 12(%esp),%esi # Function arg: const unsigned char *buf
-
- testl $3, %esi
- jnz 25f
-10:
- movl %ecx, %edx
- movl %ecx, %ebx
- andl $0x7c, %ebx
- shrl $7, %ecx
- addl %ebx,%esi
- shrl $2, %ebx
- negl %ebx
- lea 45f(%ebx,%ebx,2), %ebx
- testl %esi, %esi
- jmp *%ebx
-
- # Handle 2-byte-aligned regions
-20: addw (%esi), %ax
- lea 2(%esi), %esi
- adcl $0, %eax
- jmp 10b
-25:
- testl $1, %esi
- jz 30f
- # buf is odd
- dec %ecx
- jl 90f
- movzbl (%esi), %ebx
- addl %ebx, %eax
- adcl $0, %eax
- roll $8, %eax
- inc %esi
- testl $2, %esi
- jz 10b
-
-30: subl $2, %ecx
- ja 20b
- je 32f
- addl $2, %ecx
- jz 80f
- movzbl (%esi),%ebx # csumming 1 byte, 2-aligned
- addl %ebx, %eax
- adcl $0, %eax
- jmp 80f
-32:
- addw (%esi), %ax # csumming 2 bytes, 2-aligned
- adcl $0, %eax
- jmp 80f
-
-40:
- addl -128(%esi), %eax
- adcl -124(%esi), %eax
- adcl -120(%esi), %eax
- adcl -116(%esi), %eax
- adcl -112(%esi), %eax
- adcl -108(%esi), %eax
- adcl -104(%esi), %eax
- adcl -100(%esi), %eax
- adcl -96(%esi), %eax
- adcl -92(%esi), %eax
- adcl -88(%esi), %eax
- adcl -84(%esi), %eax
- adcl -80(%esi), %eax
- adcl -76(%esi), %eax
- adcl -72(%esi), %eax
- adcl -68(%esi), %eax
- adcl -64(%esi), %eax
- adcl -60(%esi), %eax
- adcl -56(%esi), %eax
- adcl -52(%esi), %eax
- adcl -48(%esi), %eax
- adcl -44(%esi), %eax
- adcl -40(%esi), %eax
- adcl -36(%esi), %eax
- adcl -32(%esi), %eax
- adcl -28(%esi), %eax
- adcl -24(%esi), %eax
- adcl -20(%esi), %eax
- adcl -16(%esi), %eax
- adcl -12(%esi), %eax
- adcl -8(%esi), %eax
- adcl -4(%esi), %eax
-45:
- lea 128(%esi), %esi
- adcl $0, %eax
- dec %ecx
- jge 40b
- movl %edx, %ecx
-50: andl $3, %ecx
- jz 80f
-
- # Handle the last 1-3 bytes without jumping
- notl %ecx # 1->2, 2->1, 3->0, higher bits are masked
- movl $0xffffff,%ebx # by the shll and shrl instructions
- shll $3,%ecx
- shrl %cl,%ebx
- andl -128(%esi),%ebx # esi is 4-aligned so should be ok
- addl %ebx,%eax
- adcl $0,%eax
-80:
- testl $1, 12(%esp)
- jz 90f
- roll $8, %eax
-90:
- popl %ebx
- popl %esi
- ret
-
-#endif
-
-/*
-unsigned int csum_partial_copy_generic (const char *src, char *dst,
- int len, int sum, int *src_err_ptr, int *dst_err_ptr)
- */
-
-/*
- * Copy from ds while checksumming, otherwise like csum_partial
- *
- * The macros SRC and DST specify the type of access for the instruction.
- * thus we can call a custom exception handler for all access types.
- *
- * FIXME: could someone double-check whether I haven't mixed up some SRC and
- * DST definitions? It's damn hard to trigger all cases. I hope I got
- * them all but there's no guarantee.
- */
-
-#define SRC(y...) \
- 9999: y; \
- .section __ex_table, "a"; \
- .long 9999b, 6001f ; \
- .previous
-
-#define DST(y...) \
- 9999: y; \
- .section __ex_table, "a"; \
- .long 9999b, 6002f ; \
- .previous
-
-.align 4
-.globl csum_partial_copy_generic
-
-#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
-
-#define ARGBASE 16
-#define FP 12
-
-csum_partial_copy_generic:
- subl $4,%esp
- pushl %edi
- pushl %esi
- pushl %ebx
- movl ARGBASE+16(%esp),%eax # sum
- movl ARGBASE+12(%esp),%ecx # len
- movl ARGBASE+4(%esp),%esi # src
- movl ARGBASE+8(%esp),%edi # dst
-
- testl $2, %edi # Check alignment.
- jz 2f # Jump if alignment is ok.
- subl $2, %ecx # Alignment uses up two bytes.
- jae 1f # Jump if we had at least two bytes.
- addl $2, %ecx # ecx was < 2. Deal with it.
- jmp 4f
-SRC(1: movw (%esi), %bx )
- addl $2, %esi
-DST( movw %bx, (%edi) )
- addl $2, %edi
- addw %bx, %ax
- adcl $0, %eax
-2:
- movl %ecx, FP(%esp)
- shrl $5, %ecx
- jz 2f
- testl %esi, %esi
-SRC(1: movl (%esi), %ebx )
-SRC( movl 4(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, (%edi) )
- adcl %edx, %eax
-DST( movl %edx, 4(%edi) )
-
-SRC( movl 8(%esi), %ebx )
-SRC( movl 12(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 8(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 12(%edi) )
-
-SRC( movl 16(%esi), %ebx )
-SRC( movl 20(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 16(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 20(%edi) )
-
-SRC( movl 24(%esi), %ebx )
-SRC( movl 28(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 24(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 28(%edi) )
-
- lea 32(%esi), %esi
- lea 32(%edi), %edi
- dec %ecx
- jne 1b
- adcl $0, %eax
-2: movl FP(%esp), %edx
- movl %edx, %ecx
- andl $0x1c, %edx
- je 4f
- shrl $2, %edx # This clears CF
-SRC(3: movl (%esi), %ebx )
- adcl %ebx, %eax
-DST( movl %ebx, (%edi) )
- lea 4(%esi), %esi
- lea 4(%edi), %edi
- dec %edx
- jne 3b
- adcl $0, %eax
-4: andl $3, %ecx
- jz 7f
- cmpl $2, %ecx
- jb 5f
-SRC( movw (%esi), %cx )
- leal 2(%esi), %esi
-DST( movw %cx, (%edi) )
- leal 2(%edi), %edi
- je 6f
- shll $16,%ecx
-SRC(5: movb (%esi), %cl )
-DST( movb %cl, (%edi) )
-6: addl %ecx, %eax
- adcl $0, %eax
-7:
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-
-6001:
- movl ARGBASE+20(%esp), %ebx # src_err_ptr
- movl $-EFAULT, (%ebx)
-
- # zero the complete destination - computing the rest
- # is too much work
- movl ARGBASE+8(%esp), %edi # dst
- movl ARGBASE+12(%esp), %ecx # len
- xorl %eax,%eax
- rep ; stosb
-
- jmp 5000b
-
-6002:
- movl ARGBASE+24(%esp), %ebx # dst_err_ptr
- movl $-EFAULT,(%ebx)
- jmp 5000b
-
-.previous
-
- popl %ebx
- popl %esi
- popl %edi
- popl %ecx # equivalent to addl $4,%esp
- ret
-
-#else
-
-/* Version for PentiumII/PPro */
-
-#define ROUND1(x) \
- SRC(movl x(%esi), %ebx ) ; \
- addl %ebx, %eax ; \
- DST(movl %ebx, x(%edi) ) ;
-
-#define ROUND(x) \
- SRC(movl x(%esi), %ebx ) ; \
- adcl %ebx, %eax ; \
- DST(movl %ebx, x(%edi) ) ;
-
-#define ARGBASE 12
-
-csum_partial_copy_generic:
- pushl %ebx
- pushl %edi
- pushl %esi
- movl ARGBASE+4(%esp),%esi #src
- movl ARGBASE+8(%esp),%edi #dst
- movl ARGBASE+12(%esp),%ecx #len
- movl ARGBASE+16(%esp),%eax #sum
-# movl %ecx, %edx
- movl %ecx, %ebx
- movl %esi, %edx
- shrl $6, %ecx
- andl $0x3c, %ebx
- negl %ebx
- subl %ebx, %esi
- subl %ebx, %edi
- lea -1(%esi),%edx
- andl $-32,%edx
- lea 3f(%ebx,%ebx), %ebx
- testl %esi, %esi
- jmp *%ebx
-1: addl $64,%esi
- addl $64,%edi
- SRC(movb -32(%edx),%bl) ; SRC(movb (%edx),%bl)
- ROUND1(-64) ROUND(-60) ROUND(-56) ROUND(-52)
- ROUND (-48) ROUND(-44) ROUND(-40) ROUND(-36)
- ROUND (-32) ROUND(-28) ROUND(-24) ROUND(-20)
- ROUND (-16) ROUND(-12) ROUND(-8) ROUND(-4)
-3: adcl $0,%eax
- addl $64, %edx
- dec %ecx
- jge 1b
-4: movl ARGBASE+12(%esp),%edx #len
- andl $3, %edx
- jz 7f
- cmpl $2, %edx
- jb 5f
-SRC( movw (%esi), %dx )
- leal 2(%esi), %esi
-DST( movw %dx, (%edi) )
- leal 2(%edi), %edi
- je 6f
- shll $16,%edx
-5:
-SRC( movb (%esi), %dl )
-DST( movb %dl, (%edi) )
-6: addl %edx, %eax
- adcl $0, %eax
-7:
-.section .fixup, "ax"
-6001: movl ARGBASE+20(%esp), %ebx # src_err_ptr
- movl $-EFAULT, (%ebx)
- # zero the complete destination (computing the rest is too much work)
- movl ARGBASE+8(%esp),%edi # dst
- movl ARGBASE+12(%esp),%ecx # len
- xorl %eax,%eax
- rep; stosb
- jmp 7b
-6002: movl ARGBASE+24(%esp), %ebx # dst_err_ptr
- movl $-EFAULT, (%ebx)
- jmp 7b
-.previous
-
- popl %esi
- popl %edi
- popl %ebx
- ret
-
-#undef ROUND
-#undef ROUND1
-
-#endif
+++ /dev/null
-/*
- * x86 version of "atomic_dec_and_lock()" using
- * the atomic "cmpxchg" instruction.
- *
- * (For CPU's lacking cmpxchg, we use the slow
- * generic version, and this one never even gets
- * compiled).
- */
-
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-
-int atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
- int counter;
- int newcount;
-
-repeat:
- counter = atomic_read(atomic);
- newcount = counter-1;
-
- if (!newcount)
- goto slow_path;
-
- asm volatile("lock; cmpxchgl %1,%2"
- :"=a" (newcount)
- :"r" (newcount), "m" (atomic->counter), "0" (counter));
-
- /* If the above failed, "eax" will have changed */
- if (newcount != counter)
- goto repeat;
- return 0;
-
-slow_path:
- spin_lock(lock);
- if (atomic_dec_and_test(atomic))
- return 1;
- spin_unlock(lock);
- return 0;
-}
+++ /dev/null
-/*
- * __get_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __get_user_X
- *
- * Inputs: %eax contains the address
- *
- * Outputs: %eax is error code (0 or -EFAULT)
- * %edx contains zero-extended value
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-addr_limit = 12
-
-.text
-.align 4
-.globl __get_user_1
-__get_user_1:
- movl %esp,%edx
- andl $0xffffe000,%edx
- cmpl addr_limit(%edx),%eax
- jae bad_get_user
-1: movzbl (%eax),%edx
- xorl %eax,%eax
- ret
-
-.align 4
-.globl __get_user_2
-__get_user_2:
- addl $1,%eax
- movl %esp,%edx
- jc bad_get_user
- andl $0xffffe000,%edx
- cmpl addr_limit(%edx),%eax
- jae bad_get_user
-2: movzwl -1(%eax),%edx
- xorl %eax,%eax
- ret
-
-.align 4
-.globl __get_user_4
-__get_user_4:
- addl $3,%eax
- movl %esp,%edx
- jc bad_get_user
- andl $0xffffe000,%edx
- cmpl addr_limit(%edx),%eax
- jae bad_get_user
-3: movl -3(%eax),%edx
- xorl %eax,%eax
- ret
-
-bad_get_user:
- xorl %edx,%edx
- movl $-14,%eax
- ret
-
-.section __ex_table,"a"
- .long 1b,bad_get_user
- .long 2b,bad_get_user
- .long 3b,bad_get_user
-.previous
+++ /dev/null
-#include <asm/io.h>
-
-void * __io_virt_debug(unsigned long x, const char *file, int line)
-{
- if (x < PAGE_OFFSET) {
- printk("io mapaddr 0x%05lx not valid at %s:%d!\n", x, file, line);
- return __va(x);
- }
- return (void *)x;
-}
-
-unsigned long __io_phys_debug(unsigned long x, const char *file, int line)
-{
- if (x < PAGE_OFFSET) {
- printk("io mapaddr 0x%05lx not valid at %s:%d!\n", x, file, line);
- return x;
- }
- return __pa(x);
-}
+++ /dev/null
-#include <linux/config.h>
-#include <linux/string.h>
-
-#undef memcpy
-#undef memset
-
-void * memcpy(void * to, const void * from, size_t n)
-{
-#ifdef CONFIG_X86_USE_3DNOW
- return __memcpy3d(to, from, n);
-#else
- return __memcpy(to, from, n);
-#endif
-}
-
-void * memset(void * s, int c, size_t count)
-{
- return __memset(s, c, count);
-}
+++ /dev/null
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-
-#include <asm/i387.h>
-#include <asm/hardirq.h>
-
-
-/*
- * MMX 3DNow! library helper functions
- *
- * To do:
- * We can use MMX just for prefetch in IRQ's. This may be a win.
- * (reported so on K6-III)
- * We should use a better code neutral filler for the short jump
- * leal ebx. [ebx] is apparently best for K6-2, but Cyrix ??
- * We also want to clobber the filler register so we dont get any
- * register forwarding stalls on the filler.
- *
- * Add *user handling. Checksums are not a win with MMX on any CPU
- * tested so far for any MMX solution figured.
- *
- * 22/09/2000 - Arjan van de Ven
- * Improved for non-egineering-sample Athlons
- *
- */
-
-void *_mmx_memcpy(void *to, const void *from, size_t len)
-{
- void *p;
- int i;
-
- if (in_interrupt())
- return __memcpy(to, from, len);
-
- p = to;
- i = len >> 6; /* len/64 */
-
- kernel_fpu_begin();
-
- __asm__ __volatile__ (
- "1: prefetch (%0)\n" /* This set is 28 bytes */
- " prefetch 64(%0)\n"
- " prefetch 128(%0)\n"
- " prefetch 192(%0)\n"
- " prefetch 256(%0)\n"
- "2: \n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from) );
-
-
- for(; i>5; i--)
- {
- __asm__ __volatile__ (
- "1: prefetch 320(%0)\n"
- "2: movq (%0), %%mm0\n"
- " movq 8(%0), %%mm1\n"
- " movq 16(%0), %%mm2\n"
- " movq 24(%0), %%mm3\n"
- " movq %%mm0, (%1)\n"
- " movq %%mm1, 8(%1)\n"
- " movq %%mm2, 16(%1)\n"
- " movq %%mm3, 24(%1)\n"
- " movq 32(%0), %%mm0\n"
- " movq 40(%0), %%mm1\n"
- " movq 48(%0), %%mm2\n"
- " movq 56(%0), %%mm3\n"
- " movq %%mm0, 32(%1)\n"
- " movq %%mm1, 40(%1)\n"
- " movq %%mm2, 48(%1)\n"
- " movq %%mm3, 56(%1)\n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
- }
-
- for(; i>0; i--)
- {
- __asm__ __volatile__ (
- " movq (%0), %%mm0\n"
- " movq 8(%0), %%mm1\n"
- " movq 16(%0), %%mm2\n"
- " movq 24(%0), %%mm3\n"
- " movq %%mm0, (%1)\n"
- " movq %%mm1, 8(%1)\n"
- " movq %%mm2, 16(%1)\n"
- " movq %%mm3, 24(%1)\n"
- " movq 32(%0), %%mm0\n"
- " movq 40(%0), %%mm1\n"
- " movq 48(%0), %%mm2\n"
- " movq 56(%0), %%mm3\n"
- " movq %%mm0, 32(%1)\n"
- " movq %%mm1, 40(%1)\n"
- " movq %%mm2, 48(%1)\n"
- " movq %%mm3, 56(%1)\n"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
- }
- /*
- * Now do the tail of the block
- */
- __memcpy(to, from, len&63);
- kernel_fpu_end();
- return p;
-}
-
-#ifdef CONFIG_MK7
-
-/*
- * The K7 has streaming cache bypass load/store. The Cyrix III, K6 and
- * other MMX using processors do not.
- */
-
-static void fast_clear_page(void *page)
-{
- int i;
-
- kernel_fpu_begin();
-
- __asm__ __volatile__ (
- " pxor %%mm0, %%mm0\n" : :
- );
-
- for(i=0;i<4096/64;i++)
- {
- __asm__ __volatile__ (
- " movntq %%mm0, (%0)\n"
- " movntq %%mm0, 8(%0)\n"
- " movntq %%mm0, 16(%0)\n"
- " movntq %%mm0, 24(%0)\n"
- " movntq %%mm0, 32(%0)\n"
- " movntq %%mm0, 40(%0)\n"
- " movntq %%mm0, 48(%0)\n"
- " movntq %%mm0, 56(%0)\n"
- : : "r" (page) : "memory");
- page+=64;
- }
- /* since movntq is weakly-ordered, a "sfence" is needed to become
- * ordered again.
- */
- __asm__ __volatile__ (
- " sfence \n" : :
- );
- kernel_fpu_end();
-}
-
-static void fast_copy_page(void *to, void *from)
-{
- int i;
-
- kernel_fpu_begin();
-
- /* maybe the prefetch stuff can go before the expensive fnsave...
- * but that is for later. -AV
- */
- __asm__ __volatile__ (
- "1: prefetch (%0)\n"
- " prefetch 64(%0)\n"
- " prefetch 128(%0)\n"
- " prefetch 192(%0)\n"
- " prefetch 256(%0)\n"
- "2: \n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from) );
-
- for(i=0; i<(4096-320)/64; i++)
- {
- __asm__ __volatile__ (
- "1: prefetch 320(%0)\n"
- "2: movq (%0), %%mm0\n"
- " movntq %%mm0, (%1)\n"
- " movq 8(%0), %%mm1\n"
- " movntq %%mm1, 8(%1)\n"
- " movq 16(%0), %%mm2\n"
- " movntq %%mm2, 16(%1)\n"
- " movq 24(%0), %%mm3\n"
- " movntq %%mm3, 24(%1)\n"
- " movq 32(%0), %%mm4\n"
- " movntq %%mm4, 32(%1)\n"
- " movq 40(%0), %%mm5\n"
- " movntq %%mm5, 40(%1)\n"
- " movq 48(%0), %%mm6\n"
- " movntq %%mm6, 48(%1)\n"
- " movq 56(%0), %%mm7\n"
- " movntq %%mm7, 56(%1)\n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
- }
- for(i=(4096-320)/64; i<4096/64; i++)
- {
- __asm__ __volatile__ (
- "2: movq (%0), %%mm0\n"
- " movntq %%mm0, (%1)\n"
- " movq 8(%0), %%mm1\n"
- " movntq %%mm1, 8(%1)\n"
- " movq 16(%0), %%mm2\n"
- " movntq %%mm2, 16(%1)\n"
- " movq 24(%0), %%mm3\n"
- " movntq %%mm3, 24(%1)\n"
- " movq 32(%0), %%mm4\n"
- " movntq %%mm4, 32(%1)\n"
- " movq 40(%0), %%mm5\n"
- " movntq %%mm5, 40(%1)\n"
- " movq 48(%0), %%mm6\n"
- " movntq %%mm6, 48(%1)\n"
- " movq 56(%0), %%mm7\n"
- " movntq %%mm7, 56(%1)\n"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
- }
- /* since movntq is weakly-ordered, a "sfence" is needed to become
- * ordered again.
- */
- __asm__ __volatile__ (
- " sfence \n" : :
- );
- kernel_fpu_end();
-}
-
-#else
-
-/*
- * Generic MMX implementation without K7 specific streaming
- */
-
-static void fast_clear_page(void *page)
-{
- int i;
-
- kernel_fpu_begin();
-
- __asm__ __volatile__ (
- " pxor %%mm0, %%mm0\n" : :
- );
-
- for(i=0;i<4096/128;i++)
- {
- __asm__ __volatile__ (
- " movq %%mm0, (%0)\n"
- " movq %%mm0, 8(%0)\n"
- " movq %%mm0, 16(%0)\n"
- " movq %%mm0, 24(%0)\n"
- " movq %%mm0, 32(%0)\n"
- " movq %%mm0, 40(%0)\n"
- " movq %%mm0, 48(%0)\n"
- " movq %%mm0, 56(%0)\n"
- " movq %%mm0, 64(%0)\n"
- " movq %%mm0, 72(%0)\n"
- " movq %%mm0, 80(%0)\n"
- " movq %%mm0, 88(%0)\n"
- " movq %%mm0, 96(%0)\n"
- " movq %%mm0, 104(%0)\n"
- " movq %%mm0, 112(%0)\n"
- " movq %%mm0, 120(%0)\n"
- : : "r" (page) : "memory");
- page+=128;
- }
-
- kernel_fpu_end();
-}
-
-static void fast_copy_page(void *to, void *from)
-{
- int i;
-
-
- kernel_fpu_begin();
-
- __asm__ __volatile__ (
- "1: prefetch (%0)\n"
- " prefetch 64(%0)\n"
- " prefetch 128(%0)\n"
- " prefetch 192(%0)\n"
- " prefetch 256(%0)\n"
- "2: \n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from) );
-
- for(i=0; i<4096/64; i++)
- {
- __asm__ __volatile__ (
- "1: prefetch 320(%0)\n"
- "2: movq (%0), %%mm0\n"
- " movq 8(%0), %%mm1\n"
- " movq 16(%0), %%mm2\n"
- " movq 24(%0), %%mm3\n"
- " movq %%mm0, (%1)\n"
- " movq %%mm1, 8(%1)\n"
- " movq %%mm2, 16(%1)\n"
- " movq %%mm3, 24(%1)\n"
- " movq 32(%0), %%mm0\n"
- " movq 40(%0), %%mm1\n"
- " movq 48(%0), %%mm2\n"
- " movq 56(%0), %%mm3\n"
- " movq %%mm0, 32(%1)\n"
- " movq %%mm1, 40(%1)\n"
- " movq %%mm2, 48(%1)\n"
- " movq %%mm3, 56(%1)\n"
- ".section .fixup, \"ax\"\n"
- "3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b, 3b\n"
- ".previous"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
- }
- kernel_fpu_end();
-}
-
-
-#endif
-
-/*
- * Favour MMX for page clear and copy.
- */
-
-static void slow_zero_page(void * page)
-{
- int d0, d1;
- __asm__ __volatile__( \
- "cld\n\t" \
- "rep ; stosl" \
- : "=&c" (d0), "=&D" (d1)
- :"a" (0),"1" (page),"0" (1024)
- :"memory");
-}
-
-void mmx_clear_page(void * page)
-{
- if(in_interrupt())
- slow_zero_page(page);
- else
- fast_clear_page(page);
-}
-
-static void slow_copy_page(void *to, void *from)
-{
- int d0, d1, d2;
- __asm__ __volatile__( \
- "cld\n\t" \
- "rep ; movsl" \
- : "=&c" (d0), "=&D" (d1), "=&S" (d2) \
- : "0" (1024),"1" ((long) to),"2" ((long) from) \
- : "memory");
-}
-
-
-void mmx_copy_page(void *to, void *from)
-{
- if(in_interrupt())
- slow_copy_page(to, from);
- else
- fast_copy_page(to, from);
-}
+++ /dev/null
-/*
- * FIXME: old compatibility stuff, will be removed soon.
- */
-
-#include <net/checksum.h>
-
-unsigned int csum_partial_copy( const char *src, char *dst, int len, int sum)
-{
- int src_err=0, dst_err=0;
-
- sum = csum_partial_copy_generic ( src, dst, len, sum, &src_err, &dst_err);
-
- if (src_err || dst_err)
- printk("old csum_partial_copy_fromuser(), tell mingo to convert me.\n");
-
- return sum;
-}
-
-
+++ /dev/null
-#include <linux/string.h>
-
-char * strstr(const char * cs,const char * ct)
-{
-int d0, d1;
-register char * __res;
-__asm__ __volatile__(
- "movl %6,%%edi\n\t"
- "repne\n\t"
- "scasb\n\t"
- "notl %%ecx\n\t"
- "decl %%ecx\n\t" /* NOTE! This also sets Z if searchstring='' */
- "movl %%ecx,%%edx\n"
- "1:\tmovl %6,%%edi\n\t"
- "movl %%esi,%%eax\n\t"
- "movl %%edx,%%ecx\n\t"
- "repe\n\t"
- "cmpsb\n\t"
- "je 2f\n\t" /* also works for empty string, see above */
- "xchgl %%eax,%%esi\n\t"
- "incl %%esi\n\t"
- "cmpb $0,-1(%%eax)\n\t"
- "jne 1b\n\t"
- "xorl %%eax,%%eax\n\t"
- "2:"
- :"=a" (__res), "=&c" (d0), "=&S" (d1)
- :"0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
- :"dx", "di");
-return __res;
-}
-
+++ /dev/null
-/*
- * User address space access functions.
- * The non inlined parts of asm-i386/uaccess.h are here.
- *
- * Copyright 1997 Andi Kleen <ak@muc.de>
- * Copyright 1997 Linus Torvalds
- */
-#include <linux/config.h>
-#include <asm/uaccess.h>
-#include <asm/mmx.h>
-
-#ifdef CONFIG_X86_USE_3DNOW_AND_WORKS
-
-unsigned long
-__generic_copy_to_user(void *to, const void *from, unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- {
- if(n<512)
- __copy_user(to,from,n);
- else
- mmx_copy_user(to,from,n);
- }
- return n;
-}
-
-unsigned long
-__generic_copy_from_user(void *to, const void *from, unsigned long n)
-{
- if (access_ok(VERIFY_READ, from, n))
- {
- if(n<512)
- __copy_user_zeroing(to,from,n);
- else
- mmx_copy_user_zeroing(to, from, n);
- }
- else
- memset(to, 0, n);
- return n;
-}
-
-#else
-
-unsigned long
-__generic_copy_to_user(void *to, const void *from, unsigned long n)
-{
- prefetch(from);
- if (access_ok(VERIFY_WRITE, to, n))
- __copy_user(to,from,n);
- return n;
-}
-
-unsigned long
-__generic_copy_from_user(void *to, const void *from, unsigned long n)
-{
- prefetchw(to);
- if (access_ok(VERIFY_READ, from, n))
- __copy_user_zeroing(to,from,n);
- else
- memset(to, 0, n);
- return n;
-}
-
-#endif
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst,src,count,res) \
-do { \
- int __d0, __d1, __d2; \
- __asm__ __volatile__( \
- " testl %1,%1\n" \
- " jz 2f\n" \
- "0: lodsb\n" \
- " stosb\n" \
- " testb %%al,%%al\n" \
- " jz 1f\n" \
- " decl %1\n" \
- " jnz 0b\n" \
- "1: subl %1,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %5,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- ".previous" \
- : "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
- "=&D" (__d2) \
- : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
- : "memory"); \
-} while (0)
-
-long
-__strncpy_from_user(char *dst, const char *src, long count)
-{
- long res;
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-
-long
-strncpy_from_user(char *dst, const char *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-
-
-/*
- * Zero Userspace
- */
-
-#define __do_clear_user(addr,size) \
-do { \
- int __d0; \
- __asm__ __volatile__( \
- "0: rep; stosl\n" \
- " movl %2,%0\n" \
- "1: rep; stosb\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: lea 0(%2,%0,4),%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,2b\n" \
- ".previous" \
- : "=&c"(size), "=&D" (__d0) \
- : "r"(size & 3), "0"(size / 4), "1"(addr), "a"(0)); \
-} while (0)
-
-unsigned long
-clear_user(void *to, unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- __do_clear_user(to, n);
- return n;
-}
-
-unsigned long
-__clear_user(void *to, unsigned long n)
-{
- __do_clear_user(to, n);
- return n;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-
-long strnlen_user(const char *s, long n)
-{
- unsigned long mask = -__addr_ok(s);
- unsigned long res, tmp;
-
- __asm__ __volatile__(
- " testl %0, %0\n"
- " jz 3f\n"
- " andl %0,%%ecx\n"
- "0: repne; scasb\n"
- " setne %%al\n"
- " subl %%ecx,%0\n"
- " addl %0,%%eax\n"
- "1:\n"
- ".section .fixup,\"ax\"\n"
- "2: xorl %%eax,%%eax\n"
- " jmp 1b\n"
- "3: movb $1,%%al\n"
- " jmp 1b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 0b,2b\n"
- ".previous"
- :"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
- :"0" (n), "1" (s), "2" (0), "3" (mask)
- :"cc");
- return res & mask;
-}
+++ /dev/null
-/*
- * linux/arch/i386/mm/extable.c
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/uaccess.h>
-
-extern const struct exception_table_entry __start___ex_table[];
-extern const struct exception_table_entry __stop___ex_table[];
-
-static inline unsigned long
-search_one_table(const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
-{
- while (first <= last) {
- const struct exception_table_entry *mid;
- long diff;
-
- mid = (last - first) / 2 + first;
- diff = mid->insn - value;
- if (diff == 0)
- return mid->fixup;
- else if (diff < 0)
- first = mid+1;
- else
- last = mid-1;
- }
- return 0;
-}
-
-extern spinlock_t modlist_lock;
-
-unsigned long
-search_exception_table(unsigned long addr)
-{
- unsigned long ret = 0;
-
-#ifndef CONFIG_MODULES
- /* There is only the kernel to search. */
- ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
- return ret;
-#else
- unsigned long flags;
- /* The kernel is the last "module" -- no need to treat it special. */
- struct module *mp;
-
- spin_lock_irqsave(&modlist_lock, flags);
- for (mp = module_list; mp != NULL; mp = mp->next) {
- if (mp->ex_table_start == NULL || !(mp->flags&(MOD_RUNNING|MOD_INITIALIZING)))
- continue;
- ret = search_one_table(mp->ex_table_start,
- mp->ex_table_end - 1, addr);
- if (ret)
- break;
- }
- spin_unlock_irqrestore(&modlist_lock, flags);
- return ret;
-#endif
-}
+++ /dev/null
-/*
- * Copyright 2002 Andi Kleen, SuSE Labs.
- * Thanks to Ben LaHaise for precious feedback.
- */
-
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-/* Should move most of this stuff into the appropiate includes */
-#define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1))
-#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT)
-
-static inline pte_t *lookup_address(unsigned long address)
-{
- pmd_t *pmd;
- pgd_t *pgd = pgd_offset(&init_mm, address);
-
- if (pgd_none(*pgd))
- return NULL;
- if (pgd_val(*pgd) & _PAGE_PSE)
- return (pte_t *)pgd;
- pmd = pmd_offset(pgd, address);
- if (pmd_none(*pmd))
- return NULL;
- if (pmd_val(*pmd) & _PAGE_PSE)
- return (pte_t *)pmd;
- return pte_offset(pmd, address);
-}
-
-static struct page *split_large_page(unsigned long address, pgprot_t prot)
-{
- int i;
- unsigned long addr;
- struct page *base = alloc_pages(GFP_KERNEL, 0);
- pte_t *pbase;
- if (!base)
- return NULL;
- address = __pa(address);
- addr = address & LARGE_PAGE_MASK;
- pbase = (pte_t *)page_address(base);
- for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
- pbase[i] = mk_pte_phys(addr,
- addr == address ? prot : PAGE_KERNEL);
- }
- return base;
-}
-
-static void flush_kernel_map(void * address)
-{
- if (!test_bit(X86_FEATURE_SELFSNOOP, boot_cpu_data.x86_capability)) {
- /* Could use CLFLUSH here if the CPU supports it (Hammer,P4) */
- if (boot_cpu_data.x86_model >= 4)
- asm volatile("wbinvd":::"memory");
- }
-
- /* Do global flush here to work around large page flushing errata
- in some early Athlons */
- __flush_tlb_all();
-}
-
-static void set_pmd_pte(pte_t *kpte, unsigned long address, pte_t pte)
-{
- set_pte_atomic(kpte, pte); /* change init_mm */
-#ifndef CONFIG_X86_PAE
- {
- struct list_head *l;
- spin_lock(&mmlist_lock);
- list_for_each(l, &init_mm.mmlist) {
- struct mm_struct *mm = list_entry(l, struct mm_struct, mmlist);
- pmd_t *pmd = pmd_offset(pgd_offset(mm, address), address);
- set_pte_atomic((pte_t *)pmd, pte);
- }
- spin_unlock(&mmlist_lock);
- }
-#endif
-}
-
-/* no more special protections in this 2/4MB area - revert to a
- large page again. */
-static inline void revert_page(struct page *kpte_page, unsigned long address)
-{
- pte_t *linear = (pte_t *)
- pmd_offset(pgd_offset(&init_mm, address), address);
- set_pmd_pte(linear, address,
- mk_pte_phys(__pa(address & LARGE_PAGE_MASK),
- MAKE_GLOBAL(_KERNPG_TABLE|_PAGE_PSE)));
-}
-
-/*
- * Change the page attributes of an page in the linear mapping.
- *
- * This should be used when a page is mapped with a different caching policy
- * than write-back somewhere - some CPUs do not like it when mappings with
- * different caching policies exist. This changes the page attributes of the
- * in kernel linear mapping too.
- *
- * The caller needs to ensure that there are no conflicting mappings elsewhere.
- * This function only deals with the kernel linear map.
- * When page is in highmem it must never be kmap'ed.
- */
-static int
-__change_page_attr(struct page *page, pgprot_t prot, struct page **oldpage)
-{
- pte_t *kpte;
- unsigned long address;
- struct page *kpte_page;
-
-#ifdef CONFIG_HIGHMEM
- if (page >= highmem_start_page)
- BUG();
-#endif
- address = (unsigned long)page_address(page);
- kpte = lookup_address(address);
- if (!kpte)
- return -EINVAL;
- kpte_page = virt_to_page(((unsigned long)kpte) & PAGE_MASK);
- if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL)) {
- if ((pte_val(*kpte) & _PAGE_PSE) == 0) {
- pte_t old = *kpte;
- pte_t standard = mk_pte(page, PAGE_KERNEL);
-
- set_pte_atomic(kpte, mk_pte(page, prot));
- if (pte_same(old,standard))
- atomic_inc(&kpte_page->count);
- } else {
- struct page *split = split_large_page(address, prot);
- if (!split)
- return -ENOMEM;
- atomic_inc(&kpte_page->count);
- set_pmd_pte(kpte,address,mk_pte(split, PAGE_KERNEL));
- }
- } else if ((pte_val(*kpte) & _PAGE_PSE) == 0) {
- set_pte_atomic(kpte, mk_pte(page, PAGE_KERNEL));
- atomic_dec(&kpte_page->count);
- }
-
- if (cpu_has_pse && (atomic_read(&kpte_page->count) == 1)) {
- *oldpage = kpte_page;
- revert_page(kpte_page, address);
- }
- return 0;
-}
-
-int change_page_attr(struct page *page, int numpages, pgprot_t prot)
-{
- int err = 0;
- struct page *fpage;
- int i;
-
- down_write(&init_mm.mmap_sem);
- for (i = 0; i < numpages; i++, page++) {
- fpage = NULL;
- err = __change_page_attr(page, prot, &fpage);
- if (err)
- break;
- if (fpage || i == numpages-1) {
- void *address = page_address(page);
-#ifdef CONFIG_SMP
- smp_call_function(flush_kernel_map, address, 1, 1);
-#endif
- flush_kernel_map(address);
- if (fpage)
- __free_page(fpage);
- }
- }
- up_write(&init_mm.mmap_sem);
- return err;
-}
-
-EXPORT_SYMBOL(change_page_attr);
+++ /dev/null
-#ifndef __I386_A_OUT_H__
-#define __I386_A_OUT_H__
-
-struct exec
-{
- unsigned long a_info; /* Use macros N_MAGIC, etc for access */
- unsigned a_text; /* length of text, in bytes */
- unsigned a_data; /* length of data, in bytes */
- unsigned a_bss; /* length of uninitialized data area for file, in bytes */
- unsigned a_syms; /* length of symbol table data in file, in bytes */
- unsigned a_entry; /* start address */
- unsigned a_trsize; /* length of relocation info for text, in bytes */
- unsigned a_drsize; /* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
+++ /dev/null
-#ifndef __ASM_APIC_H
-#define __ASM_APIC_H
-
-#include <linux/config.h>
-#include <linux/pm.h>
-#include <asm/apicdef.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#define APIC_DEBUG 0
-
-#if APIC_DEBUG
-#define Dprintk(x...) printk(x)
-#else
-#define Dprintk(x...)
-#endif
-
-/*
- * Basic functions accessing APICs.
- */
-
-static __inline void apic_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(APIC_BASE+reg)) = v;
-}
-
-static __inline void apic_write_atomic(unsigned long reg, unsigned long v)
-{
- xchg((volatile unsigned long *)(APIC_BASE+reg), v);
-}
-
-static __inline unsigned long apic_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(APIC_BASE+reg));
-}
-
-static __inline__ void apic_wait_icr_idle(void)
-{
- do { } while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY );
-}
-
-#ifdef CONFIG_X86_GOOD_APIC
-# define FORCE_READ_AROUND_WRITE 0
-# define apic_read_around(x)
-# define apic_write_around(x,y) apic_write((x),(y))
-#else
-# define FORCE_READ_AROUND_WRITE 1
-# define apic_read_around(x) apic_read(x)
-# define apic_write_around(x,y) apic_write_atomic((x),(y))
-#endif
-
-static inline void ack_APIC_irq(void)
-{
- /*
- * ack_APIC_irq() actually gets compiled as a single instruction:
- * - a single rmw on Pentium/82489DX
- * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
- * ... yummie.
- */
-
- /* Docs say use 0 for future compatibility */
- apic_write_around(APIC_EOI, 0);
-}
-
-extern int get_maxlvt(void);
-extern void clear_local_APIC(void);
-extern void connect_bsp_APIC (void);
-extern void disconnect_bsp_APIC (void);
-extern void disable_local_APIC (void);
-extern int verify_local_APIC (void);
-extern void cache_APIC_registers (void);
-extern void sync_Arb_IDs (void);
-extern void init_bsp_APIC (void);
-extern void setup_local_APIC (void);
-extern void init_apic_mappings (void);
-extern void smp_local_timer_interrupt (struct pt_regs * regs);
-extern void setup_APIC_clocks (void);
-extern void setup_apic_nmi_watchdog (void);
-extern inline void nmi_watchdog_tick (struct pt_regs * regs);
-extern int APIC_init_uniprocessor (void);
-extern void disable_APIC_timer(void);
-extern void enable_APIC_timer(void);
-
-extern struct pm_dev *apic_pm_register(pm_dev_t, unsigned long, pm_callback);
-extern void apic_pm_unregister(struct pm_dev*);
-
-extern unsigned int apic_timer_irqs [NR_CPUS];
-extern int check_nmi_watchdog (void);
-
-extern unsigned int nmi_watchdog;
-#define NMI_NONE 0
-#define NMI_IO_APIC 1
-#define NMI_LOCAL_APIC 2
-#define NMI_INVALID 3
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#endif /* __ASM_APIC_H */
+++ /dev/null
-#ifndef __ASM_APICDEF_H
-#define __ASM_APICDEF_H
-
-/*
- * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
- *
- * Alan Cox <Alan.Cox@linux.org>, 1995.
- * Ingo Molnar <mingo@redhat.com>, 1999, 2000
- */
-
-#define APIC_DEFAULT_PHYS_BASE 0xfee00000
-
-#define APIC_ID 0x20
-#define APIC_ID_MASK (0x0F<<24)
-#define GET_APIC_ID(x) (((x)>>24)&0x0F)
-#define APIC_LVR 0x30
-#define APIC_LVR_MASK 0xFF00FF
-#define GET_APIC_VERSION(x) ((x)&0xFF)
-#define GET_APIC_MAXLVT(x) (((x)>>16)&0xFF)
-#define APIC_INTEGRATED(x) ((x)&0xF0)
-#define APIC_TASKPRI 0x80
-#define APIC_TPRI_MASK 0xFF
-#define APIC_ARBPRI 0x90
-#define APIC_ARBPRI_MASK 0xFF
-#define APIC_PROCPRI 0xA0
-#define APIC_EOI 0xB0
-#define APIC_EIO_ACK 0x0 /* Write this to the EOI register */
-#define APIC_RRR 0xC0
-#define APIC_LDR 0xD0
-#define APIC_LDR_MASK (0xFF<<24)
-#define GET_APIC_LOGICAL_ID(x) (((x)>>24)&0xFF)
-#define SET_APIC_LOGICAL_ID(x) (((x)<<24))
-#define APIC_ALL_CPUS 0xFF
-#define APIC_DFR 0xE0
-#define APIC_DFR_CLUSTER 0x0FFFFFFFul /* Clustered */
-#define APIC_DFR_FLAT 0xFFFFFFFFul /* Flat mode */
-#define APIC_SPIV 0xF0
-#define APIC_SPIV_FOCUS_DISABLED (1<<9)
-#define APIC_SPIV_APIC_ENABLED (1<<8)
-#define APIC_ISR 0x100
-#define APIC_TMR 0x180
-#define APIC_IRR 0x200
-#define APIC_ESR 0x280
-#define APIC_ESR_SEND_CS 0x00001
-#define APIC_ESR_RECV_CS 0x00002
-#define APIC_ESR_SEND_ACC 0x00004
-#define APIC_ESR_RECV_ACC 0x00008
-#define APIC_ESR_SENDILL 0x00020
-#define APIC_ESR_RECVILL 0x00040
-#define APIC_ESR_ILLREGA 0x00080
-#define APIC_ICR 0x300
-#define APIC_DEST_SELF 0x40000
-#define APIC_DEST_ALLINC 0x80000
-#define APIC_DEST_ALLBUT 0xC0000
-#define APIC_ICR_RR_MASK 0x30000
-#define APIC_ICR_RR_INVALID 0x00000
-#define APIC_ICR_RR_INPROG 0x10000
-#define APIC_ICR_RR_VALID 0x20000
-#define APIC_INT_LEVELTRIG 0x08000
-#define APIC_INT_ASSERT 0x04000
-#define APIC_ICR_BUSY 0x01000
-#define APIC_DEST_PHYSICAL 0x00000
-#define APIC_DEST_LOGICAL 0x00800
-#define APIC_DM_FIXED 0x00000
-#define APIC_DM_LOWEST 0x00100
-#define APIC_DM_SMI 0x00200
-#define APIC_DM_REMRD 0x00300
-#define APIC_DM_NMI 0x00400
-#define APIC_DM_INIT 0x00500
-#define APIC_DM_STARTUP 0x00600
-#define APIC_DM_EXTINT 0x00700
-#define APIC_VECTOR_MASK 0x000FF
-#define APIC_ICR2 0x310
-#define GET_APIC_DEST_FIELD(x) (((x)>>24)&0xFF)
-#define SET_APIC_DEST_FIELD(x) ((x)<<24)
-#define APIC_LVTT 0x320
-#define APIC_LVTPC 0x340
-#define APIC_LVT0 0x350
-#define APIC_LVT_TIMER_BASE_MASK (0x3<<18)
-#define GET_APIC_TIMER_BASE(x) (((x)>>18)&0x3)
-#define SET_APIC_TIMER_BASE(x) (((x)<<18))
-#define APIC_TIMER_BASE_CLKIN 0x0
-#define APIC_TIMER_BASE_TMBASE 0x1
-#define APIC_TIMER_BASE_DIV 0x2
-#define APIC_LVT_TIMER_PERIODIC (1<<17)
-#define APIC_LVT_MASKED (1<<16)
-#define APIC_LVT_LEVEL_TRIGGER (1<<15)
-#define APIC_LVT_REMOTE_IRR (1<<14)
-#define APIC_INPUT_POLARITY (1<<13)
-#define APIC_SEND_PENDING (1<<12)
-#define GET_APIC_DELIVERY_MODE(x) (((x)>>8)&0x7)
-#define SET_APIC_DELIVERY_MODE(x,y) (((x)&~0x700)|((y)<<8))
-#define APIC_MODE_FIXED 0x0
-#define APIC_MODE_NMI 0x4
-#define APIC_MODE_EXINT 0x7
-#define APIC_LVT1 0x360
-#define APIC_LVTERR 0x370
-#define APIC_TMICT 0x380
-#define APIC_TMCCT 0x390
-#define APIC_TDCR 0x3E0
-#define APIC_TDR_DIV_TMBASE (1<<2)
-#define APIC_TDR_DIV_1 0xB
-#define APIC_TDR_DIV_2 0x0
-#define APIC_TDR_DIV_4 0x1
-#define APIC_TDR_DIV_8 0x2
-#define APIC_TDR_DIV_16 0x3
-#define APIC_TDR_DIV_32 0x8
-#define APIC_TDR_DIV_64 0x9
-#define APIC_TDR_DIV_128 0xA
-
-#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
-
-#ifdef CONFIG_X86_CLUSTERED_APIC
-#define MAX_IO_APICS 32
-#else
-#define MAX_IO_APICS 8
-#endif
-
-
-/*
- * The broadcast ID is 0xF for old APICs and 0xFF for xAPICs. SAPICs
- * don't broadcast (yet?), but if they did, they might use 0xFFFF.
- */
-#define APIC_BROADCAST_ID_XAPIC (0xFF)
-#define APIC_BROADCAST_ID_APIC (0x0F)
-
-/*
- * the local APIC register structure, memory mapped. Not terribly well
- * tested, but we might eventually use this one in the future - the
- * problem why we cannot use it right now is the P5 APIC, it has an
- * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
- */
-#define u32 unsigned int
-
-#define lapic ((volatile struct local_apic *)APIC_BASE)
-
-struct local_apic {
-
-/*000*/ struct { u32 __reserved[4]; } __reserved_01;
-
-/*010*/ struct { u32 __reserved[4]; } __reserved_02;
-
-/*020*/ struct { /* APIC ID Register */
- u32 __reserved_1 : 24,
- phys_apic_id : 4,
- __reserved_2 : 4;
- u32 __reserved[3];
- } id;
-
-/*030*/ const
- struct { /* APIC Version Register */
- u32 version : 8,
- __reserved_1 : 8,
- max_lvt : 8,
- __reserved_2 : 8;
- u32 __reserved[3];
- } version;
-
-/*040*/ struct { u32 __reserved[4]; } __reserved_03;
-
-/*050*/ struct { u32 __reserved[4]; } __reserved_04;
-
-/*060*/ struct { u32 __reserved[4]; } __reserved_05;
-
-/*070*/ struct { u32 __reserved[4]; } __reserved_06;
-
-/*080*/ struct { /* Task Priority Register */
- u32 priority : 8,
- __reserved_1 : 24;
- u32 __reserved_2[3];
- } tpr;
-
-/*090*/ const
- struct { /* Arbitration Priority Register */
- u32 priority : 8,
- __reserved_1 : 24;
- u32 __reserved_2[3];
- } apr;
-
-/*0A0*/ const
- struct { /* Processor Priority Register */
- u32 priority : 8,
- __reserved_1 : 24;
- u32 __reserved_2[3];
- } ppr;
-
-/*0B0*/ struct { /* End Of Interrupt Register */
- u32 eoi;
- u32 __reserved[3];
- } eoi;
-
-/*0C0*/ struct { u32 __reserved[4]; } __reserved_07;
-
-/*0D0*/ struct { /* Logical Destination Register */
- u32 __reserved_1 : 24,
- logical_dest : 8;
- u32 __reserved_2[3];
- } ldr;
-
-/*0E0*/ struct { /* Destination Format Register */
- u32 __reserved_1 : 28,
- model : 4;
- u32 __reserved_2[3];
- } dfr;
-
-/*0F0*/ struct { /* Spurious Interrupt Vector Register */
- u32 spurious_vector : 8,
- apic_enabled : 1,
- focus_cpu : 1,
- __reserved_2 : 22;
- u32 __reserved_3[3];
- } svr;
-
-/*100*/ struct { /* In Service Register */
-/*170*/ u32 bitfield;
- u32 __reserved[3];
- } isr [8];
-
-/*180*/ struct { /* Trigger Mode Register */
-/*1F0*/ u32 bitfield;
- u32 __reserved[3];
- } tmr [8];
-
-/*200*/ struct { /* Interrupt Request Register */
-/*270*/ u32 bitfield;
- u32 __reserved[3];
- } irr [8];
-
-/*280*/ union { /* Error Status Register */
- struct {
- u32 send_cs_error : 1,
- receive_cs_error : 1,
- send_accept_error : 1,
- receive_accept_error : 1,
- __reserved_1 : 1,
- send_illegal_vector : 1,
- receive_illegal_vector : 1,
- illegal_register_address : 1,
- __reserved_2 : 24;
- u32 __reserved_3[3];
- } error_bits;
- struct {
- u32 errors;
- u32 __reserved_3[3];
- } all_errors;
- } esr;
-
-/*290*/ struct { u32 __reserved[4]; } __reserved_08;
-
-/*2A0*/ struct { u32 __reserved[4]; } __reserved_09;
-
-/*2B0*/ struct { u32 __reserved[4]; } __reserved_10;
-
-/*2C0*/ struct { u32 __reserved[4]; } __reserved_11;
-
-/*2D0*/ struct { u32 __reserved[4]; } __reserved_12;
-
-/*2E0*/ struct { u32 __reserved[4]; } __reserved_13;
-
-/*2F0*/ struct { u32 __reserved[4]; } __reserved_14;
-
-/*300*/ struct { /* Interrupt Command Register 1 */
- u32 vector : 8,
- delivery_mode : 3,
- destination_mode : 1,
- delivery_status : 1,
- __reserved_1 : 1,
- level : 1,
- trigger : 1,
- __reserved_2 : 2,
- shorthand : 2,
- __reserved_3 : 12;
- u32 __reserved_4[3];
- } icr1;
-
-/*310*/ struct { /* Interrupt Command Register 2 */
- union {
- u32 __reserved_1 : 24,
- phys_dest : 4,
- __reserved_2 : 4;
- u32 __reserved_3 : 24,
- logical_dest : 8;
- } dest;
- u32 __reserved_4[3];
- } icr2;
-
-/*320*/ struct { /* LVT - Timer */
- u32 vector : 8,
- __reserved_1 : 4,
- delivery_status : 1,
- __reserved_2 : 3,
- mask : 1,
- timer_mode : 1,
- __reserved_3 : 14;
- u32 __reserved_4[3];
- } lvt_timer;
-
-/*330*/ struct { u32 __reserved[4]; } __reserved_15;
-
-/*340*/ struct { /* LVT - Performance Counter */
- u32 vector : 8,
- delivery_mode : 3,
- __reserved_1 : 1,
- delivery_status : 1,
- __reserved_2 : 3,
- mask : 1,
- __reserved_3 : 15;
- u32 __reserved_4[3];
- } lvt_pc;
-
-/*350*/ struct { /* LVT - LINT0 */
- u32 vector : 8,
- delivery_mode : 3,
- __reserved_1 : 1,
- delivery_status : 1,
- polarity : 1,
- remote_irr : 1,
- trigger : 1,
- mask : 1,
- __reserved_2 : 15;
- u32 __reserved_3[3];
- } lvt_lint0;
-
-/*360*/ struct { /* LVT - LINT1 */
- u32 vector : 8,
- delivery_mode : 3,
- __reserved_1 : 1,
- delivery_status : 1,
- polarity : 1,
- remote_irr : 1,
- trigger : 1,
- mask : 1,
- __reserved_2 : 15;
- u32 __reserved_3[3];
- } lvt_lint1;
-
-/*370*/ struct { /* LVT - Error */
- u32 vector : 8,
- __reserved_1 : 4,
- delivery_status : 1,
- __reserved_2 : 3,
- mask : 1,
- __reserved_3 : 15;
- u32 __reserved_4[3];
- } lvt_error;
-
-/*380*/ struct { /* Timer Initial Count Register */
- u32 initial_count;
- u32 __reserved_2[3];
- } timer_icr;
-
-/*390*/ const
- struct { /* Timer Current Count Register */
- u32 curr_count;
- u32 __reserved_2[3];
- } timer_ccr;
-
-/*3A0*/ struct { u32 __reserved[4]; } __reserved_16;
-
-/*3B0*/ struct { u32 __reserved[4]; } __reserved_17;
-
-/*3C0*/ struct { u32 __reserved[4]; } __reserved_18;
-
-/*3D0*/ struct { u32 __reserved[4]; } __reserved_19;
-
-/*3E0*/ struct { /* Timer Divide Configuration Register */
- u32 divisor : 4,
- __reserved_1 : 28;
- u32 __reserved_2[3];
- } timer_dcr;
-
-/*3F0*/ struct { u32 __reserved[4]; } __reserved_20;
-
-} __attribute__ ((packed));
-
-#undef u32
-
-#endif
+++ /dev/null
-#ifndef __ARCH_I386_ATOMIC__
-#define __ARCH_I386_ATOMIC__
-
-#include <linux/config.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#ifdef CONFIG_SMP
-#define LOCK "lock ; "
-#else
-#define LOCK ""
-#endif
-
-/*
- * Make sure gcc doesn't try to be clever and move things around
- * on us. We need to use _exactly_ the address the user gave us,
- * not some alias that contains the same information.
- */
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i) { (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_read(v) ((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v. Note that the guaranteed useful range
- * of an atomic_t is only 24 bits.
- */
-static __inline__ void atomic_add(int i, atomic_t *v)
-{
- __asm__ __volatile__(
- LOCK "addl %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub - subtract the atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ void atomic_sub(int i, atomic_t *v)
-{
- __asm__ __volatile__(
- LOCK "subl %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
-{
- unsigned char c;
-
- __asm__ __volatile__(
- LOCK "subl %2,%0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
- return c;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ void atomic_inc(atomic_t *v)
-{
- __asm__ __volatile__(
- LOCK "incl %0"
- :"=m" (v->counter)
- :"m" (v->counter));
-}
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ void atomic_dec(atomic_t *v)
-{
- __asm__ __volatile__(
- LOCK "decl %0"
- :"=m" (v->counter)
- :"m" (v->counter));
-}
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ int atomic_dec_and_test(atomic_t *v)
-{
- unsigned char c;
-
- __asm__ __volatile__(
- LOCK "decl %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
- return c != 0;
-}
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ int atomic_inc_and_test(atomic_t *v)
-{
- unsigned char c;
-
- __asm__ __volatile__(
- LOCK "incl %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
- return c != 0;
-}
-
-/**
- * atomic_add_negative - add and test if negative
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-static __inline__ int atomic_add_negative(int i, atomic_t *v)
-{
- unsigned char c;
-
- __asm__ __volatile__(
- LOCK "addl %2,%0; sets %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
- return c;
-}
-
-/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr) \
-__asm__ __volatile__(LOCK "andl %0,%1" \
-: : "r" (~(mask)),"m" (*addr) : "memory")
-
-#define atomic_set_mask(mask, addr) \
-__asm__ __volatile__(LOCK "orl %0,%1" \
-: : "r" (mask),"m" (*addr) : "memory")
-
-/* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif
+++ /dev/null
-#ifndef _I386_BITOPS_H
-#define _I386_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/config.h>
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX "lock ; "
-#else
-#define LOCK_PREFIX ""
-#endif
-
-#define ADDR (*(volatile long *) addr)
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered. See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void set_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btsl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __set_bit(int nr, volatile void * addr)
-{
- __asm__(
- "btsl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered. However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void clear_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btrl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-}
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __change_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__(
- "btcl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void change_bit(int nr, volatile void * addr)
-{
- __asm__ __volatile__( LOCK_PREFIX
- "btcl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__(
- "btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr));
- return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__(
- "btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr));
- return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__(
- "btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
- return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its new value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__( LOCK_PREFIX
- "btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
- return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile void * addr);
-#endif
-
-static __inline__ int constant_test_bit(int nr, const volatile void * addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int variable_test_bit(int nr, volatile void * addr)
-{
- int oldbit;
-
- __asm__ __volatile__(
- "btl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit)
- :"m" (ADDR),"Ir" (nr));
- return oldbit;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- constant_test_bit((nr),(addr)) : \
- variable_test_bit((nr),(addr)))
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-static __inline__ int find_first_zero_bit(void * addr, unsigned size)
-{
- int d0, d1, d2;
- int res;
-
- if (!size)
- return 0;
- /* This looks at memory. Mark it volatile to tell gcc not to move it around */
- __asm__ __volatile__(
- "movl $-1,%%eax\n\t"
- "xorl %%edx,%%edx\n\t"
- "repe; scasl\n\t"
- "je 1f\n\t"
- "xorl -4(%%edi),%%eax\n\t"
- "subl $4,%%edi\n\t"
- "bsfl %%eax,%%edx\n"
- "1:\tsubl %%ebx,%%edi\n\t"
- "shll $3,%%edi\n\t"
- "addl %%edi,%%edx"
- :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
- :"1" ((size + 31) >> 5), "2" (addr), "b" (addr));
- return res;
-}
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
-{
- unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
- int set = 0, bit = offset & 31, res;
-
- if (bit) {
- /*
- * Look for zero in first byte
- */
- __asm__("bsfl %1,%0\n\t"
- "jne 1f\n\t"
- "movl $32, %0\n"
- "1:"
- : "=r" (set)
- : "r" (~(*p >> bit)));
- if (set < (32 - bit))
- return set + offset;
- set = 32 - bit;
- p++;
- }
- /*
- * No zero yet, search remaining full bytes for a zero
- */
- res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
- return (offset + set + res);
-}
-
-/**
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
- __asm__("bsfl %1,%0"
- :"=r" (word)
- :"r" (~word));
- return word;
-}
-
-#ifdef __KERNEL__
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static __inline__ int ffs(int x)
-{
- int r;
-
- __asm__("bsfl %1,%0\n\t"
- "jnz 1f\n\t"
- "movl $-1,%0\n"
- "1:" : "=r" (r) : "rm" (x));
- return r+1;
-}
-
-/**
- * hweightN - returns the hamming weight of a N-bit word
- * @x: the word to weigh
- *
- * The Hamming Weight of a number is the total number of bits set in it.
- */
-
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
-
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
-
-#define ext2_set_bit __test_and_set_bit
-#define ext2_clear_bit __test_and_clear_bit
-#define ext2_test_bit test_bit
-#define ext2_find_first_zero_bit find_first_zero_bit
-#define ext2_find_next_zero_bit find_next_zero_bit
-
-/* Bitmap functions for the minix filesystem. */
-#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
-#define minix_set_bit(nr,addr) __set_bit(nr,addr)
-#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr) test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
-
-#endif /* __KERNEL__ */
-
-#endif /* _I386_BITOPS_H */
+++ /dev/null
-#ifndef _LINUX_BOOT_H
-#define _LINUX_BOOT_H
-
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG 0x9000
-#define DEF_SYSSEG 0x1000
-#define DEF_SETUPSEG 0x9020
-#define DEF_SYSSIZE 0x7F00
-
-/* Internal svga startup constants */
-#define NORMAL_VGA 0xffff /* 80x25 mode */
-#define EXTENDED_VGA 0xfffe /* 80x50 mode */
-#define ASK_VGA 0xfffd /* ask for it at bootup */
-
-#endif
+++ /dev/null
-#ifndef _I386_BYTEORDER_H
-#define _I386_BYTEORDER_H
-
-#include <asm/types.h>
-
-#ifdef __GNUC__
-
-/* For avoiding bswap on i386 */
-#ifdef __KERNEL__
-#include <linux/config.h>
-#endif
-
-static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
-{
-#ifdef CONFIG_X86_BSWAP
- __asm__("bswap %0" : "=r" (x) : "0" (x));
-#else
- __asm__("xchgb %b0,%h0\n\t" /* swap lower bytes */
- "rorl $16,%0\n\t" /* swap words */
- "xchgb %b0,%h0" /* swap higher bytes */
- :"=q" (x)
- : "0" (x));
-#endif
- return x;
-}
-
-static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
-{
- __asm__("xchgb %b0,%h0" /* swap bytes */ \
- : "=q" (x) \
- : "0" (x)); \
- return x;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _I386_BYTEORDER_H */
+++ /dev/null
-/*
- * include/asm-i386/cache.h
- */
-#ifndef __ARCH_I386_CACHE_H
-#define __ARCH_I386_CACHE_H
-
-#include <linux/config.h>
-
-/* L1 cache line size */
-#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#endif
+++ /dev/null
-#ifndef _I386_CHECKSUM_H
-#define _I386_CHECKSUM_H
-
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage unsigned int csum_partial_copy_generic( const char *src, char *dst, int len, int sum,
- int *src_err_ptr, int *dst_err_ptr);
-
-/*
- * Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
- * verify_area().
- */
-static __inline__
-unsigned int csum_partial_copy_nocheck ( const char *src, char *dst,
- int len, int sum)
-{
- return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL);
-}
-
-static __inline__
-unsigned int csum_partial_copy_from_user ( const char *src, char *dst,
- int len, int sum, int *err_ptr)
-{
- return csum_partial_copy_generic ( src, dst, len, sum, err_ptr, NULL);
-}
-
-/*
- * These are the old (and unsafe) way of doing checksums, a warning message will be
- * printed if they are used and an exeption occurs.
- *
- * these functions should go away after some time.
- */
-
-#define csum_partial_copy_fromuser csum_partial_copy
-unsigned int csum_partial_copy( const char *src, char *dst, int len, int sum);
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- * By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
- * Arnt Gulbrandsen.
- */
-static inline unsigned short ip_fast_csum(unsigned char * iph,
- unsigned int ihl)
-{
- unsigned int sum;
-
- __asm__ __volatile__(
- "movl (%1), %0 ;\n"
- "subl $4, %2 ;\n"
- "jbe 2f ;\n"
- "addl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
-"1: adcl 16(%1), %0 ;\n"
- "lea 4(%1), %1 ;\n"
- "decl %2 ;\n"
- "jne 1b ;\n"
- "adcl $0, %0 ;\n"
- "movl %0, %2 ;\n"
- "shrl $16, %0 ;\n"
- "addw %w2, %w0 ;\n"
- "adcl $0, %0 ;\n"
- "notl %0 ;\n"
-"2: ;\n"
- /* Since the input registers which are loaded with iph and ipl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl)
- : "1" (iph), "2" (ihl));
- return(sum);
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline unsigned int csum_fold(unsigned int sum)
-{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl $0xffff, %0 ;\n"
- : "=r" (sum)
- : "r" (sum << 16), "0" (sum & 0xffff0000)
- );
- return (~sum) >> 16;
-}
-
-static inline unsigned long csum_tcpudp_nofold(unsigned long saddr,
- unsigned long daddr,
- unsigned short len,
- unsigned short proto,
- unsigned int sum)
-{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl %2, %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=r" (sum)
- : "g" (daddr), "g"(saddr), "g"((ntohs(len)<<16)+proto*256), "0"(sum));
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline unsigned short int csum_tcpudp_magic(unsigned long saddr,
- unsigned long daddr,
- unsigned short len,
- unsigned short proto,
- unsigned int sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline unsigned short ip_compute_csum(unsigned char * buff, int len)
-{
- return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
- struct in6_addr *daddr,
- __u32 len,
- unsigned short proto,
- unsigned int sum)
-{
- __asm__(
- "addl 0(%1), %0 ;\n"
- "adcl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
- "adcl 0(%2), %0 ;\n"
- "adcl 4(%2), %0 ;\n"
- "adcl 8(%2), %0 ;\n"
- "adcl 12(%2), %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl %4, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=&r" (sum)
- : "r" (saddr), "r" (daddr),
- "r"(htonl(len)), "r"(htonl(proto)), "0"(sum));
-
- return csum_fold(sum);
-}
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static __inline__ unsigned int csum_and_copy_to_user(const char *src, char *dst,
- int len, int sum, int *err_ptr)
-{
- if (access_ok(VERIFY_WRITE, dst, len))
- return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr);
-
- if (len)
- *err_ptr = -EFAULT;
-
- return -1; /* invalid checksum */
-}
-
-#endif
+++ /dev/null
-/*
- * cpufeature.h
- *
- * Defines x86 CPU feature bits
- */
-
-#ifndef __ASM_I386_CPUFEATURE_H
-#define __ASM_I386_CPUFEATURE_H
-
-/* Sample usage: CPU_FEATURE_P(cpu.x86_capability, FPU) */
-#define CPU_FEATURE_P(CAP, FEATURE) test_bit(CAP, X86_FEATURE_##FEATURE ##_BIT)
-
-#define NCAPINTS 4 /* Currently we have 4 32-bit words worth of info */
-
-/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
-#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
-#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */
-#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
-#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
-#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
-#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
-#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
-#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
-#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
-#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
-#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
-#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
-#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
-#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
-#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DTES (0*32+21) /* Debug Trace Store */
-#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
-#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
- /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
-#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
-#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
-
-/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
-/* Don't duplicate feature flags which are redundant with Intel! */
-#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */
-#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
-#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
-#define X86_FEATURE_3DNOW (1*32+31) /* 3DNow! */
-
-/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
-#define X86_FEATURE_RECOVERY (2*32+ 0) /* CPU in recovery mode */
-#define X86_FEATURE_LONGRUN (2*32+ 1) /* Longrun power control */
-#define X86_FEATURE_LRTI (2*32+ 3) /* LongRun table interface */
-
-/* Other features, Linux-defined mapping, word 3 */
-/* This range is used for feature bits which conflict or are synthesized */
-#define X86_FEATURE_CXMMX (3*32+ 0) /* Cyrix MMX extensions */
-#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */
-#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
-#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
-
-#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability)
-
-#endif /* __ASM_I386_CPUFEATURE_H */
-
-/*
- * Local Variables:
- * mode:c
- * comment-column:42
- * End:
- */
+++ /dev/null
-#ifndef _I386_CURRENT_H
-#define _I386_CURRENT_H
-
-struct task_struct;
-
-static inline struct task_struct * get_current(void)
-{
- struct task_struct *current;
- __asm__("andl %%esp,%0; ":"=r" (current) : "0" (~8191UL));
- return current;
- }
-
-#define current get_current()
-
-#endif /* !(_I386_CURRENT_H) */
+++ /dev/null
-#ifndef _I386_DEBUGREG_H
-#define _I386_DEBUGREG_H
-
-
-/* Indicate the register numbers for a number of the specific
- debug registers. Registers 0-3 contain the addresses we wish to trap on */
-#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */
-#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */
-
-#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */
-#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */
-
-/* Define a few things for the status register. We can use this to determine
- which debugging register was responsible for the trap. The other bits
- are either reserved or not of interest to us. */
-
-#define DR_TRAP0 (0x1) /* db0 */
-#define DR_TRAP1 (0x2) /* db1 */
-#define DR_TRAP2 (0x4) /* db2 */
-#define DR_TRAP3 (0x8) /* db3 */
-
-#define DR_STEP (0x4000) /* single-step */
-#define DR_SWITCH (0x8000) /* task switch */
-
-/* Now define a bunch of things for manipulating the control register.
- The top two bytes of the control register consist of 4 fields of 4
- bits - each field corresponds to one of the four debug registers,
- and indicates what types of access we trap on, and how large the data
- field is that we are looking at */
-
-#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
-#define DR_CONTROL_SIZE 4 /* 4 control bits per register */
-
-#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */
-#define DR_RW_WRITE (0x1)
-#define DR_RW_READ (0x3)
-
-#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
-#define DR_LEN_2 (0x4)
-#define DR_LEN_4 (0xC)
-
-/* The low byte to the control register determine which registers are
- enabled. There are 4 fields of two bits. One bit is "local", meaning
- that the processor will reset the bit after a task switch and the other
- is global meaning that we have to explicitly reset the bit. With linux,
- you can use either one, since we explicitly zero the register when we enter
- kernel mode. */
-
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
-#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */
-
-#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
-#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
-
-/* The second byte to the control register has a few special things.
- We can slow the instruction pipeline for instructions coming via the
- gdt or the ldt if we want to. I am not sure why this is an advantage */
-
-#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
-#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
-#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
-
-#endif
+++ /dev/null
-#ifndef _I386_DELAY_H
-#define _I386_DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines calling functions in arch/i386/lib/delay.c
- */
-
-extern void __bad_udelay(void);
-
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long usecs);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) (__builtin_constant_p(n) ? \
- ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
- __udelay(n))
-
-#endif /* defined(_I386_DELAY_H) */
+++ /dev/null
-#ifndef __I386_DIV64
-#define __I386_DIV64
-
-#define do_div(n,base) ({ \
- unsigned long __upper, __low, __high, __mod; \
- asm("":"=a" (__low), "=d" (__high):"A" (n)); \
- __upper = __high; \
- if (__high) { \
- __upper = __high % (base); \
- __high = __high / (base); \
- } \
- asm("divl %2":"=a" (__low), "=d" (__mod):"rm" (base), "0" (__low), "1" (__upper)); \
- asm("":"=A" (n):"a" (__low),"d" (__high)); \
- __mod; \
-})
-
-#endif
+++ /dev/null
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <linux/config.h>
-#include <linux/spinlock.h> /* And spinlocks */
-#include <asm/io.h> /* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb outb_p
-#else
-#define dma_outb outb
-#endif
-
-#define dma_inb inb
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-
-#define DMA_ADDR_0 0x00 /* DMA address registers */
-#define DMA_ADDR_1 0x02
-#define DMA_ADDR_2 0x04
-#define DMA_ADDR_3 0x06
-#define DMA_ADDR_4 0xC0
-#define DMA_ADDR_5 0xC4
-#define DMA_ADDR_6 0xC8
-#define DMA_ADDR_7 0xCC
-
-#define DMA_CNT_0 0x01 /* DMA count registers */
-#define DMA_CNT_1 0x03
-#define DMA_CNT_2 0x05
-#define DMA_CNT_3 0x07
-#define DMA_CNT_4 0xC2
-#define DMA_CNT_5 0xC6
-#define DMA_CNT_6 0xCA
-#define DMA_CNT_7 0xCE
-
-#define DMA_PAGE_0 0x87 /* DMA page registers */
-#define DMA_PAGE_1 0x83
-#define DMA_PAGE_2 0x81
-#define DMA_PAGE_3 0x82
-#define DMA_PAGE_5 0x8B
-#define DMA_PAGE_6 0x89
-#define DMA_PAGE_7 0x8A
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
-{
- switch(dmanr) {
- case 0:
- dma_outb(pagenr, DMA_PAGE_0);
- break;
- case 1:
- dma_outb(pagenr, DMA_PAGE_1);
- break;
- case 2:
- dma_outb(pagenr, DMA_PAGE_2);
- break;
- case 3:
- dma_outb(pagenr, DMA_PAGE_3);
- break;
- case 5:
- dma_outb(pagenr & 0xfe, DMA_PAGE_5);
- break;
- case 6:
- dma_outb(pagenr & 0xfe, DMA_PAGE_6);
- break;
- case 7:
- dma_outb(pagenr & 0xfe, DMA_PAGE_7);
- break;
- }
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- set_dma_page(dmanr, a>>16);
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
-
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_DMA_H */
+++ /dev/null
-#ifndef __ASMi386_ELF_H
-#define __ASMi386_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-#include <linux/utsname.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-typedef struct user_fxsr_struct elf_fpxregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_386
-
-/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
- contains a pointer to a function which might be registered using `atexit'.
- This provides a mean for the dynamic linker to call DT_FINI functions for
- shared libraries that have been loaded before the code runs.
-
- A value of 0 tells we have no such handler.
-
- We might as well make sure everything else is cleared too (except for %esp),
- just to make things more deterministic.
- */
-#define ELF_PLAT_INIT(_r) do { \
- _r->ebx = 0; _r->ecx = 0; _r->edx = 0; \
- _r->esi = 0; _r->edi = 0; _r->ebp = 0; \
- _r->eax = 0; \
-} while (0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
-
-/* Wow, the "main" arch needs arch dependent functions too.. :) */
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- now struct_user_regs, they are different) */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- pr_reg[0] = regs->ebx; \
- pr_reg[1] = regs->ecx; \
- pr_reg[2] = regs->edx; \
- pr_reg[3] = regs->esi; \
- pr_reg[4] = regs->edi; \
- pr_reg[5] = regs->ebp; \
- pr_reg[6] = regs->eax; \
- pr_reg[7] = regs->xds; \
- pr_reg[8] = regs->xes; \
- /* fake once used fs and gs selectors? */ \
- pr_reg[9] = regs->xds; /* was fs and __fs */ \
- pr_reg[10] = regs->xds; /* was gs and __gs */ \
- pr_reg[11] = regs->orig_eax; \
- pr_reg[12] = regs->eip; \
- pr_reg[13] = regs->xcs; \
- pr_reg[14] = regs->eflags; \
- pr_reg[15] = regs->esp; \
- pr_reg[16] = regs->xss;
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.x86_capability[0])
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (system_utsname.machine)
-
-#ifdef __KERNEL__
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-#endif
-
-#endif
+++ /dev/null
-#ifndef _I386_ERRNO_H
-#define _I386_ERRNO_H
-
-#define EPERM 1 /* Operation not permitted */
-#define ENOENT 2 /* No such file or directory */
-#define ESRCH 3 /* No such process */
-#define EINTR 4 /* Interrupted system call */
-#define EIO 5 /* I/O error */
-#define ENXIO 6 /* No such device or address */
-#define E2BIG 7 /* Argument list too long */
-#define ENOEXEC 8 /* Exec format error */
-#define EBADF 9 /* Bad file number */
-#define ECHILD 10 /* No child processes */
-#define EAGAIN 11 /* Try again */
-#define ENOMEM 12 /* Out of memory */
-#define EACCES 13 /* Permission denied */
-#define EFAULT 14 /* Bad address */
-#define ENOTBLK 15 /* Block device required */
-#define EBUSY 16 /* Device or resource busy */
-#define EEXIST 17 /* File exists */
-#define EXDEV 18 /* Cross-device link */
-#define ENODEV 19 /* No such device */
-#define ENOTDIR 20 /* Not a directory */
-#define EISDIR 21 /* Is a directory */
-#define EINVAL 22 /* Invalid argument */
-#define ENFILE 23 /* File table overflow */
-#define EMFILE 24 /* Too many open files */
-#define ENOTTY 25 /* Not a typewriter */
-#define ETXTBSY 26 /* Text file busy */
-#define EFBIG 27 /* File too large */
-#define ENOSPC 28 /* No space left on device */
-#define ESPIPE 29 /* Illegal seek */
-#define EROFS 30 /* Read-only file system */
-#define EMLINK 31 /* Too many links */
-#define EPIPE 32 /* Broken pipe */
-#define EDOM 33 /* Math argument out of domain of func */
-#define ERANGE 34 /* Math result not representable */
-#define EDEADLK 35 /* Resource deadlock would occur */
-#define ENAMETOOLONG 36 /* File name too long */
-#define ENOLCK 37 /* No record locks available */
-#define ENOSYS 38 /* Function not implemented */
-#define ENOTEMPTY 39 /* Directory not empty */
-#define ELOOP 40 /* Too many symbolic links encountered */
-#define EWOULDBLOCK EAGAIN /* Operation would block */
-#define ENOMSG 42 /* No message of desired type */
-#define EIDRM 43 /* Identifier removed */
-#define ECHRNG 44 /* Channel number out of range */
-#define EL2NSYNC 45 /* Level 2 not synchronized */
-#define EL3HLT 46 /* Level 3 halted */
-#define EL3RST 47 /* Level 3 reset */
-#define ELNRNG 48 /* Link number out of range */
-#define EUNATCH 49 /* Protocol driver not attached */
-#define ENOCSI 50 /* No CSI structure available */
-#define EL2HLT 51 /* Level 2 halted */
-#define EBADE 52 /* Invalid exchange */
-#define EBADR 53 /* Invalid request descriptor */
-#define EXFULL 54 /* Exchange full */
-#define ENOANO 55 /* No anode */
-#define EBADRQC 56 /* Invalid request code */
-#define EBADSLT 57 /* Invalid slot */
-
-#define EDEADLOCK EDEADLK
-
-#define EBFONT 59 /* Bad font file format */
-#define ENOSTR 60 /* Device not a stream */
-#define ENODATA 61 /* No data available */
-#define ETIME 62 /* Timer expired */
-#define ENOSR 63 /* Out of streams resources */
-#define ENONET 64 /* Machine is not on the network */
-#define ENOPKG 65 /* Package not installed */
-#define EREMOTE 66 /* Object is remote */
-#define ENOLINK 67 /* Link has been severed */
-#define EADV 68 /* Advertise error */
-#define ESRMNT 69 /* Srmount error */
-#define ECOMM 70 /* Communication error on send */
-#define EPROTO 71 /* Protocol error */
-#define EMULTIHOP 72 /* Multihop attempted */
-#define EDOTDOT 73 /* RFS specific error */
-#define EBADMSG 74 /* Not a data message */
-#define EOVERFLOW 75 /* Value too large for defined data type */
-#define ENOTUNIQ 76 /* Name not unique on network */
-#define EBADFD 77 /* File descriptor in bad state */
-#define EREMCHG 78 /* Remote address changed */
-#define ELIBACC 79 /* Can not access a needed shared library */
-#define ELIBBAD 80 /* Accessing a corrupted shared library */
-#define ELIBSCN 81 /* .lib section in a.out corrupted */
-#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
-#define ELIBEXEC 83 /* Cannot exec a shared library directly */
-#define EILSEQ 84 /* Illegal byte sequence */
-#define ERESTART 85 /* Interrupted system call should be restarted */
-#define ESTRPIPE 86 /* Streams pipe error */
-#define EUSERS 87 /* Too many users */
-#define ENOTSOCK 88 /* Socket operation on non-socket */
-#define EDESTADDRREQ 89 /* Destination address required */
-#define EMSGSIZE 90 /* Message too long */
-#define EPROTOTYPE 91 /* Protocol wrong type for socket */
-#define ENOPROTOOPT 92 /* Protocol not available */
-#define EPROTONOSUPPORT 93 /* Protocol not supported */
-#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
-#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
-#define EPFNOSUPPORT 96 /* Protocol family not supported */
-#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
-#define EADDRINUSE 98 /* Address already in use */
-#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
-#define ENETDOWN 100 /* Network is down */
-#define ENETUNREACH 101 /* Network is unreachable */
-#define ENETRESET 102 /* Network dropped connection because of reset */
-#define ECONNABORTED 103 /* Software caused connection abort */
-#define ECONNRESET 104 /* Connection reset by peer */
-#define ENOBUFS 105 /* No buffer space available */
-#define EISCONN 106 /* Transport endpoint is already connected */
-#define ENOTCONN 107 /* Transport endpoint is not connected */
-#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
-#define ETOOMANYREFS 109 /* Too many references: cannot splice */
-#define ETIMEDOUT 110 /* Connection timed out */
-#define ECONNREFUSED 111 /* Connection refused */
-#define EHOSTDOWN 112 /* Host is down */
-#define EHOSTUNREACH 113 /* No route to host */
-#define EALREADY 114 /* Operation already in progress */
-#define EINPROGRESS 115 /* Operation now in progress */
-#define ESTALE 116 /* Stale NFS file handle */
-#define EUCLEAN 117 /* Structure needs cleaning */
-#define ENOTNAM 118 /* Not a XENIX named type file */
-#define ENAVAIL 119 /* No XENIX semaphores available */
-#define EISNAM 120 /* Is a named type file */
-#define EREMOTEIO 121 /* Remote I/O error */
-#define EDQUOT 122 /* Quota exceeded */
-
-#define ENOMEDIUM 123 /* No medium found */
-#define EMEDIUMTYPE 124 /* Wrong medium type */
-
-#endif
+++ /dev/null
-#ifndef _I386_FCNTL_H
-#define _I386_FCNTL_H
-
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
- located on an ext2 file system */
-#define O_ACCMODE 0003
-#define O_RDONLY 00
-#define O_WRONLY 01
-#define O_RDWR 02
-#define O_CREAT 0100 /* not fcntl */
-#define O_EXCL 0200 /* not fcntl */
-#define O_NOCTTY 0400 /* not fcntl */
-#define O_TRUNC 01000 /* not fcntl */
-#define O_APPEND 02000
-#define O_NONBLOCK 04000
-#define O_NDELAY O_NONBLOCK
-#define O_SYNC 010000
-#define FASYNC 020000 /* fcntl, for BSD compatibility */
-#define O_DIRECT 040000 /* direct disk access hint */
-#define O_LARGEFILE 0100000
-#define O_DIRECTORY 0200000 /* must be a directory */
-#define O_NOFOLLOW 0400000 /* don't follow links */
-
-#define F_DUPFD 0 /* dup */
-#define F_GETFD 1 /* get close_on_exec */
-#define F_SETFD 2 /* set/clear close_on_exec */
-#define F_GETFL 3 /* get file->f_flags */
-#define F_SETFL 4 /* set file->f_flags */
-#define F_GETLK 5
-#define F_SETLK 6
-#define F_SETLKW 7
-
-#define F_SETOWN 8 /* for sockets. */
-#define F_GETOWN 9 /* for sockets. */
-#define F_SETSIG 10 /* for sockets. */
-#define F_GETSIG 11 /* for sockets. */
-
-#define F_GETLK64 12 /* using 'struct flock64' */
-#define F_SETLK64 13
-#define F_SETLKW64 14
-
-/* for F_[GET|SET]FL */
-#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
-
-/* for posix fcntl() and lockf() */
-#define F_RDLCK 0
-#define F_WRLCK 1
-#define F_UNLCK 2
-
-/* for old implementation of bsd flock () */
-#define F_EXLCK 4 /* or 3 */
-#define F_SHLCK 8 /* or 4 */
-
-/* for leases */
-#define F_INPROGRESS 16
-
-/* operations for bsd flock(), also used by the kernel implementation */
-#define LOCK_SH 1 /* shared lock */
-#define LOCK_EX 2 /* exclusive lock */
-#define LOCK_NB 4 /* or'd with one of the above to prevent
- blocking */
-#define LOCK_UN 8 /* remove lock */
-
-#define LOCK_MAND 32 /* This is a mandatory flock */
-#define LOCK_READ 64 /* ... Which allows concurrent read operations */
-#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
-#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
-
-struct flock {
- short l_type;
- short l_whence;
- off_t l_start;
- off_t l_len;
- pid_t l_pid;
-};
-
-struct flock64 {
- short l_type;
- short l_whence;
- loff_t l_start;
- loff_t l_len;
- pid_t l_pid;
-};
-
-#define F_LINUX_SPECIFIC_BASE 1024
-
-#endif
+++ /dev/null
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_I386_FLOPPY_H
-#define __ASM_I386_FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(port,value) outb_p(port,value)
-
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
-#ifndef NO_FLOPPY_ASSEMBLER
- __asm__ (
- "testl %1,%1"
- "je 3f"
-"1: inb %w4,%b0"
- "andb $160,%b0"
- "cmpb $160,%b0"
- "jne 2f"
- "incw %w4"
- "testl %3,%3"
- "jne 4f"
- "inb %w4,%b0"
- "movb %0,(%2)"
- "jmp 5f"
-"4: movb (%2),%0"
- "outb %b0,%w4"
-"5: decw %w4"
- "outb %0,$0x80"
- "decl %1"
- "incl %2"
- "testl %1,%1"
- "jne 1b"
-"3: inb %w4,%b0"
-"2: "
- : "=a" ((char) st),
- "=c" ((long) virtual_dma_count),
- "=S" ((long) virtual_dma_addr)
- : "b" ((long) virtual_dma_mode),
- "d" ((short) virtual_dma_port+4),
- "1" ((long) virtual_dma_count),
- "2" ((long) virtual_dma_addr));
-#else
- {
- register int lcount;
- register char *lptr;
-
- st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-#endif
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
-}
-
-static void fd_disable_dma(void)
-{
- if(! (can_use_virtual_dma & 1))
- disable_dma(FLOPPY_DMA);
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- SA_INTERRUPT|SA_SAMPLE_RANDOM,
- "floppy", NULL);
-
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
- return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- if((unsigned int) addr >= (unsigned int) high_memory)
- return vfree((void *)addr);
- else
- free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
- if(can_use_virtual_dma == 2) {
- if((unsigned int) addr >= (unsigned int) high_memory ||
- virt_to_bus(addr) >= 0x1000000 ||
- _CROSS_64KB(addr, size, 0))
- use_virtual_dma = 1;
- else
- use_virtual_dma = 0;
- } else {
- use_virtual_dma = can_use_virtual_dma & 1;
- }
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
- if (CROSS_64KB(addr, size)) {
- printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
- return -1;
- }
-#endif
- /* actual, physical DMA */
- doing_pdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,virt_to_bus(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
- {
- request_dma,
- free_dma,
- get_dma_residue,
- dma_mem_alloc,
- hard_dma_setup
- },
- {
- vdma_request_dma,
- vdma_nop,
- vdma_get_dma_residue,
- vdma_mem_alloc,
- vdma_dma_setup
- }
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user. Paul G.
- */
-#define FLOPPY0_TYPE ({ \
- unsigned long flags; \
- unsigned char val; \
- spin_lock_irqsave(&rtc_lock, flags); \
- val = (CMOS_READ(0x10) >> 4) & 15; \
- spin_unlock_irqrestore(&rtc_lock, flags); \
- val; \
-})
-
-#define FLOPPY1_TYPE ({ \
- unsigned long flags; \
- unsigned char val; \
- spin_lock_irqsave(&rtc_lock, flags); \
- val = CMOS_READ(0x10) & 15; \
- spin_unlock_irqrestore(&rtc_lock, flags); \
- val; \
-})
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define FLOPPY_MOTOR_MASK 0xf0
-
-#define AUTO_DMA
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_I386_FLOPPY_H */
+++ /dev/null
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* assembly code in softirq.h is sensitive to the offsets of these fields */
-typedef struct {
- unsigned int __softirq_pending;
- unsigned int __local_irq_count;
- unsigned int __local_bh_count;
- unsigned int __syscall_count;
- struct task_struct * __ksoftirqd_task; /* waitqueue is too large */
- unsigned int __nmi_count; /* arch dependent */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-/*
- * Are we in an interrupt context? Either doing bottom half
- * or hardware interrupt processing?
- */
-#define in_interrupt() ({ int __cpu = smp_processor_id(); \
- (local_irq_count(__cpu) + local_bh_count(__cpu) != 0); })
-
-#define in_irq() (local_irq_count(smp_processor_id()) != 0)
-
-#ifndef CONFIG_SMP
-
-#define hardirq_trylock(cpu) (local_irq_count(cpu) == 0)
-#define hardirq_endlock(cpu) do { } while (0)
-
-#define irq_enter(cpu, irq) (local_irq_count(cpu)++)
-#define irq_exit(cpu, irq) (local_irq_count(cpu)--)
-
-#define synchronize_irq() barrier()
-
-#else
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-
-extern unsigned char global_irq_holder;
-extern unsigned volatile long global_irq_lock; /* long for set_bit -RR */
-
-static inline int irqs_running (void)
-{
- int i;
-
- for (i = 0; i < smp_num_cpus; i++)
- if (local_irq_count(i))
- return 1;
- return 0;
-}
-
-static inline void release_irqlock(int cpu)
-{
- /* if we didn't own the irq lock, just ignore.. */
- if (global_irq_holder == (unsigned char) cpu) {
- global_irq_holder = NO_PROC_ID;
- clear_bit(0,&global_irq_lock);
- }
-}
-
-static inline void irq_enter(int cpu, int irq)
-{
- ++local_irq_count(cpu);
-
- while (test_bit(0,&global_irq_lock)) {
- cpu_relax();
- }
-}
-
-static inline void irq_exit(int cpu, int irq)
-{
- --local_irq_count(cpu);
-}
-
-static inline int hardirq_trylock(int cpu)
-{
- return !local_irq_count(cpu) && !test_bit(0,&global_irq_lock);
-}
-
-#define hardirq_endlock(cpu) do { } while (0)
-
-extern void synchronize_irq(void);
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_HARDIRQ_H */
+++ /dev/null
-/*
- * linux/include/asm-i386/hdreg.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-#ifndef __ASMi386_HDREG_H
-#define __ASMi386_HDREG_H
-
-//typedef unsigned short ide_ioreg_t;
-typedef unsigned long ide_ioreg_t;
-
-#endif /* __ASMi386_HDREG_H */
+++ /dev/null
-/*
- * include/asm-i386/i387.h
- *
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-#ifndef __ASM_I386_I387_H
-#define __ASM_I386_I387_H
-
-#include <linux/sched.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-
-extern void init_fpu(void);
-/*
- * FPU lazy state save handling...
- */
-extern void save_init_fpu( struct task_struct *tsk );
-extern void restore_fpu( struct task_struct *tsk );
-
-extern void kernel_fpu_begin(void);
-#define kernel_fpu_end() stts()
-
-
-#define unlazy_fpu( tsk ) do { \
- if ( tsk->flags & PF_USEDFPU ) \
- save_init_fpu( tsk ); \
-} while (0)
-
-#define clear_fpu( tsk ) do { \
- if ( tsk->flags & PF_USEDFPU ) { \
- asm volatile("fwait"); \
- tsk->flags &= ~PF_USEDFPU; \
- stts(); \
- } \
-} while (0)
-
-/*
- * FPU state interaction...
- */
-extern unsigned short get_fpu_cwd( struct task_struct *tsk );
-extern unsigned short get_fpu_swd( struct task_struct *tsk );
-extern unsigned short get_fpu_twd( struct task_struct *tsk );
-extern unsigned short get_fpu_mxcsr( struct task_struct *tsk );
-
-extern void set_fpu_cwd( struct task_struct *tsk, unsigned short cwd );
-extern void set_fpu_swd( struct task_struct *tsk, unsigned short swd );
-extern void set_fpu_twd( struct task_struct *tsk, unsigned short twd );
-extern void set_fpu_mxcsr( struct task_struct *tsk, unsigned short mxcsr );
-
-#define load_mxcsr( val ) do { \
- unsigned long __mxcsr = ((unsigned long)(val) & 0xffbf); \
- asm volatile( "ldmxcsr %0" : : "m" (__mxcsr) ); \
-} while (0)
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387( struct _fpstate *buf );
-extern int restore_i387( struct _fpstate *buf );
-
-/*
- * ptrace request handers...
- */
-extern int get_fpregs( struct user_i387_struct *buf,
- struct task_struct *tsk );
-extern int set_fpregs( struct task_struct *tsk,
- struct user_i387_struct *buf );
-
-extern int get_fpxregs( struct user_fxsr_struct *buf,
- struct task_struct *tsk );
-extern int set_fpxregs( struct task_struct *tsk,
- struct user_fxsr_struct *buf );
-extern void load_empty_fpu(struct task_struct *);
-
-/*
- * FPU state for core dumps...
- */
-extern int dump_fpu( struct pt_regs *regs,
- struct user_i387_struct *fpu );
-extern int dump_extended_fpu( struct pt_regs *regs,
- struct user_fxsr_struct *fpu );
-
-#endif /* __ASM_I386_I387_H */
+++ /dev/null
-/*
- * linux/include/asm-i386/ide.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-/*
- * This file contains the i386 architecture specific IDE code.
- */
-
-#ifndef __ASMi386_IDE_H
-#define __ASMi386_IDE_H
-
-#ifdef __KERNEL__
-
-#include <linux/config.h>
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 6
-# endif
-#endif
-
-static __inline__ int ide_default_irq(ide_ioreg_t base)
-{
- switch (base) {
- case 0x1f0: return 14;
- case 0x170: return 15;
- case 0x1e8: return 11;
- case 0x168: return 10;
- case 0x1e0: return 8;
- case 0x160: return 12;
- default:
- return 0;
- }
-}
-
-static __inline__ ide_ioreg_t ide_default_io_base(int index)
-{
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- case 4: return 0x1e0;
- case 5: return 0x160;
- default:
- return 0;
- }
-}
-
-static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, ide_ioreg_t data_port, ide_ioreg_t ctrl_port, int *irq)
-{
- ide_ioreg_t reg = data_port;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += 1;
- }
- if (ctrl_port) {
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- } else {
- hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
- }
- if (irq != NULL)
- *irq = 0;
- hw->io_ports[IDE_IRQ_OFFSET] = 0;
-}
-
-static __inline__ void ide_init_default_hwifs(void)
-{
-#ifndef CONFIG_BLK_DEV_IDEPCI
- hw_regs_t hw;
- int index;
-
- for(index = 0; index < MAX_HWIFS; index++) {
- memset(&hw, 0, sizeof hw);
- ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
- hw.irq = ide_default_irq(ide_default_io_base(index));
- ide_register_hw(&hw, NULL);
- }
-#endif /* CONFIG_BLK_DEV_IDEPCI */
-}
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMi386_IDE_H */
+++ /dev/null
-#error "<asm/init.h> should never be used - use <linux/init.h> instead"
+++ /dev/null
-#ifndef __ASM_IO_APIC_H
-#define __ASM_IO_APIC_H
-
-#include <linux/config.h>
-#include <asm/types.h>
-
-/*
- * Intel IO-APIC support for SMP and UP systems.
- *
- * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
- */
-
-#ifdef CONFIG_X86_IO_APIC
-
-#define APIC_MISMATCH_DEBUG
-
-#define IO_APIC_BASE(idx) \
- ((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
- + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
-
-/*
- * The structure of the IO-APIC:
- */
-struct IO_APIC_reg_00 {
- __u32 __reserved_2 : 24,
- ID : 4,
- __reserved_1 : 4;
-} __attribute__ ((packed));
-
-struct IO_APIC_reg_01 {
- __u32 version : 8,
- __reserved_2 : 7,
- PRQ : 1,
- entries : 8,
- __reserved_1 : 8;
-} __attribute__ ((packed));
-
-struct IO_APIC_reg_02 {
- __u32 __reserved_2 : 24,
- arbitration : 4,
- __reserved_1 : 4;
-} __attribute__ ((packed));
-
-/*
- * # of IO-APICs and # of IRQ routing registers
- */
-extern int nr_ioapics;
-extern int nr_ioapic_registers[MAX_IO_APICS];
-
-enum ioapic_irq_destination_types {
- dest_Fixed = 0,
- dest_LowestPrio = 1,
- dest_SMI = 2,
- dest__reserved_1 = 3,
- dest_NMI = 4,
- dest_INIT = 5,
- dest__reserved_2 = 6,
- dest_ExtINT = 7
-};
-
-struct IO_APIC_route_entry {
- __u32 vector : 8,
- delivery_mode : 3, /* 000: FIXED
- * 001: lowest prio
- * 111: ExtINT
- */
- dest_mode : 1, /* 0: physical, 1: logical */
- delivery_status : 1,
- polarity : 1,
- irr : 1,
- trigger : 1, /* 0: edge, 1: level */
- mask : 1, /* 0: enabled, 1: disabled */
- __reserved_2 : 15;
-
- union { struct { __u32
- __reserved_1 : 24,
- physical_dest : 4,
- __reserved_2 : 4;
- } physical;
-
- struct { __u32
- __reserved_1 : 24,
- logical_dest : 8;
- } logical;
- } dest;
-
-} __attribute__ ((packed));
-
-/*
- * MP-BIOS irq configuration table structures:
- */
-
-/* I/O APIC entries */
-extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-extern int mp_irq_entries;
-
-/* MP IRQ source entries */
-extern struct mpc_config_intsrc *mp_irqs;
-
-/* non-0 if default (table-less) MP configuration */
-extern int mpc_default_type;
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
- *IO_APIC_BASE(apic) = reg;
- return *(IO_APIC_BASE(apic)+4);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
- *IO_APIC_BASE(apic) = reg;
- *(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int value)
-{
- *(IO_APIC_BASE(apic)+4) = value;
-}
-
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
- (void) *(IO_APIC_BASE(apic)+4);
-}
-
-/* 1 if "noapic" boot option passed */
-extern int skip_ioapic_setup;
-
-/*
- * If we use the IO-APIC for IRQ routing, disable automatic
- * assignment of PCI IRQ's.
- */
-#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup)
-
-#else /* !CONFIG_X86_IO_APIC */
-#define io_apic_assign_pci_irqs 0
-#endif
-
-#endif
+++ /dev/null
-/* $Id: ioctl.h,v 1.5 1993/07/19 21:53:50 root Exp root $
- *
- * linux/ioctl.h for Linux by H.H. Bergman.
- */
-
-#ifndef _ASMI386_IOCTL_H
-#define _ASMI386_IOCTL_H
-
-/* ioctl command encoding: 32 bits total, command in lower 16 bits,
- * size of the parameter structure in the lower 14 bits of the
- * upper 16 bits.
- * Encoding the size of the parameter structure in the ioctl request
- * is useful for catching programs compiled with old versions
- * and to avoid overwriting user space outside the user buffer area.
- * The highest 2 bits are reserved for indicating the ``access mode''.
- * NOTE: This limits the max parameter size to 16kB -1 !
- */
-
-/*
- * The following is for compatibility across the various Linux
- * platforms. The i386 ioctl numbering scheme doesn't really enforce
- * a type field. De facto, however, the top 8 bits of the lower 16
- * bits are indeed used as a type field, so we might just as well make
- * this explicit here. Please be sure to use the decoding macros
- * below from now on.
- */
-#define _IOC_NRBITS 8
-#define _IOC_TYPEBITS 8
-#define _IOC_SIZEBITS 14
-#define _IOC_DIRBITS 2
-
-#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT 0
-#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
-#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
-#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
-
-/*
- * Direction bits.
- */
-#define _IOC_NONE 0U
-#define _IOC_WRITE 1U
-#define _IOC_READ 2U
-
-#define _IOC(dir,type,nr,size) \
- (((dir) << _IOC_DIRSHIFT) | \
- ((type) << _IOC_TYPESHIFT) | \
- ((nr) << _IOC_NRSHIFT) | \
- ((size) << _IOC_SIZESHIFT))
-
-/* used to create numbers */
-#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* used to decode ioctl numbers.. */
-#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
-#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
-
-/* ...and for the drivers/sound files... */
-
-#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
-
-#endif /* _ASMI386_IOCTL_H */
+++ /dev/null
-#ifndef __ARCH_I386_IOCTLS_H__
-#define __ARCH_I386_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif
+++ /dev/null
-#ifndef __i386_IPC_H__
-#define __i386_IPC_H__
-
-/*
- * These are used to wrap system calls on x86.
- *
- * See arch/i386/kernel/sys_i386.c for ugly details..
- */
-struct ipc_kludge {
- struct msgbuf *msgp;
- long msgtyp;
-};
-
-#define SEMOP 1
-#define SEMGET 2
-#define SEMCTL 3
-#define MSGSND 11
-#define MSGRCV 12
-#define MSGGET 13
-#define MSGCTL 14
-#define SHMAT 21
-#define SHMDT 22
-#define SHMGET 23
-#define SHMCTL 24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC 25
-
-#define IPCCALL(version,op) ((version)<<16 | (op))
-
-#endif
+++ /dev/null
-#ifndef __i386_IPCBUF_H__
-#define __i386_IPCBUF_H__
-
-/*
- * The ipc64_perm structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __i386_IPCBUF_H__ */
+++ /dev/null
-/*
- * linux/include/asm-i386/keyboard.h
- *
- * Created 3 Nov 1996 by Geert Uytterhoeven
- */
-
-/*
- * This file contains the i386 architecture specific keyboard definitions
- */
-
-#ifndef _I386_KEYBOARD_H
-#define _I386_KEYBOARD_H
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/kd.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define KEYBOARD_IRQ 1
-#define DISABLE_KBD_DURING_INTERRUPTS 0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
-extern pm_callback pm_kbd_request_override;
-extern unsigned char pckbd_sysrq_xlate[128];
-
-#define kbd_setkeycode pckbd_setkeycode
-#define kbd_getkeycode pckbd_getkeycode
-#define kbd_translate pckbd_translate
-#define kbd_unexpected_up pckbd_unexpected_up
-#define kbd_leds pckbd_leds
-#define kbd_init_hw pckbd_init_hw
-#define kbd_sysrq_xlate pckbd_sysrq_xlate
-
-#define SYSRQ_KEY 0x54
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
- "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform. */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations. */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#define AUX_IRQ 12
-
-#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS/2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
-#endif /* _I386_KEYBOARD_H */
+++ /dev/null
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BH_IRQ,
- KM_TYPE_NR
-};
-
-#endif
+++ /dev/null
-/*
- * ldt.h
- *
- * Definitions of structures used with the modify_ldt system call.
- */
-#ifndef _LINUX_LDT_H
-#define _LINUX_LDT_H
-
-/* Maximum number of LDT entries supported. */
-#define LDT_ENTRIES 8192
-/* The size of each LDT entry. */
-#define LDT_ENTRY_SIZE 8
-
-#ifndef __ASSEMBLY__
-struct modify_ldt_ldt_s {
- unsigned int entry_number;
- unsigned long base_addr;
- unsigned int limit;
- unsigned int seg_32bit:1;
- unsigned int contents:2;
- unsigned int read_exec_only:1;
- unsigned int limit_in_pages:1;
- unsigned int seg_not_present:1;
- unsigned int useable:1;
-};
-
-#define MODIFY_LDT_CONTENTS_DATA 0
-#define MODIFY_LDT_CONTENTS_STACK 1
-#define MODIFY_LDT_CONTENTS_CODE 2
-
-#endif /* !__ASSEMBLY__ */
-#endif
+++ /dev/null
-/* $Id: linux_logo.h,v 1.8 1998/07/30 16:30:24 jj Exp $
- * include/asm-i386/linux_logo.h: This is a linux logo
- * to be displayed on boot.
- *
- * Copyright (C) 1996 Larry Ewing (lewing@isc.tamu.edu)
- * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- *
- * You can put anything here, but:
- * LINUX_LOGO_COLORS has to be less than 224
- * image size has to be 80x80
- * values have to start from 0x20
- * (i.e. RGB(linux_logo_red[0],
- * linux_logo_green[0],
- * linux_logo_blue[0]) is color 0x20)
- * BW image has to be 80x80 as well, with MS bit
- * on the left
- * Serial_console ascii image can be any size,
- * but should contain %s to display the version
- */
-
-#include <linux/init.h>
-#include <linux/version.h>
-
-#define linux_logo_banner "Linux/ia32 version " UTS_RELEASE
-
-#include <linux/linux_logo.h>
-
+++ /dev/null
-/*
- * SMP locks primitives for building ix86 locks
- * (not yet used).
- *
- * Alan Cox, alan@redhat.com, 1995
- */
-
-/*
- * This would be much easier but far less clear and easy
- * to borrow for other processors if it was just assembler.
- */
-
-static __inline__ void prim_spin_lock(struct spinlock *sp)
-{
- int processor=smp_processor_id();
-
- /*
- * Grab the lock bit
- */
-
- while(lock_set_bit(0,&sp->lock))
- {
- /*
- * Failed, but that's cos we own it!
- */
-
- if(sp->cpu==processor)
- {
- sp->users++;
- return 0;
- }
- /*
- * Spin in the cache S state if possible
- */
- while(sp->lock)
- {
- /*
- * Wait for any invalidates to go off
- */
-
- if(smp_invalidate_needed&(1<<processor))
- while(lock_clear_bit(processor,&smp_invalidate_needed))
- local_flush_tlb();
- sp->spins++;
- }
- /*
- * Someone wrote the line, we go 'I' and get
- * the cache entry. Now try to regrab
- */
- }
- sp->users++;sp->cpu=processor;
- return 1;
-}
-
-/*
- * Release a spin lock
- */
-
-static __inline__ int prim_spin_unlock(struct spinlock *sp)
-{
- /* This is safe. The decrement is still guarded by the lock. A multilock would
- not be safe this way */
- if(!--sp->users)
- {
- sp->cpu= NO_PROC_ID;lock_clear_bit(0,&sp->lock);
- return 1;
- }
- return 0;
-}
-
-
-/*
- * Non blocking lock grab
- */
-
-static __inline__ int prim_spin_lock_nb(struct spinlock *sp)
-{
- if(lock_set_bit(0,&sp->lock))
- return 0; /* Locked already */
- sp->users++;
- return 1; /* We got the lock */
-}
-
-
-/*
- * These wrap the locking primitives up for usage
- */
-
-static __inline__ void spinlock(struct spinlock *sp)
-{
- if(sp->priority<current->lock_order)
- panic("lock order violation: %s (%d)\n", sp->name, current->lock_order);
- if(prim_spin_lock(sp))
- {
- /*
- * We got a new lock. Update the priority chain
- */
- sp->oldpri=current->lock_order;
- current->lock_order=sp->priority;
- }
-}
-
-static __inline__ void spinunlock(struct spinlock *sp)
-{
- int pri;
- if(current->lock_order!=sp->priority)
- panic("lock release order violation %s (%d)\n", sp->name, current->lock_order);
- pri=sp->oldpri;
- if(prim_spin_unlock(sp))
- {
- /*
- * Update the debugging lock priority chain. We dumped
- * our last right to the lock.
- */
- current->lock_order=sp->pri;
- }
-}
-
-static __inline__ void spintestlock(struct spinlock *sp)
-{
- /*
- * We do no sanity checks, it's legal to optimistically
- * get a lower lock.
- */
- prim_spin_lock_nb(sp);
-}
-
-static __inline__ void spintestunlock(struct spinlock *sp)
-{
- /*
- * A testlock doesn't update the lock chain so we
- * must not update it on free
- */
- prim_spin_unlock(sp);
-}
+++ /dev/null
-#ifndef _I386_MATH_EMU_H
-#define _I386_MATH_EMU_H
-
-#include <asm/sigcontext.h>
-
-int restore_i387_soft(void *s387, struct _fpstate *buf);
-int save_i387_soft(void *s387, struct _fpstate * buf);
-
-/* This structure matches the layout of the data saved to the stack
- following a device-not-present interrupt, part of it saved
- automatically by the 80386/80486.
- */
-struct info {
- long ___orig_eip;
- long ___ebx;
- long ___ecx;
- long ___edx;
- long ___esi;
- long ___edi;
- long ___ebp;
- long ___eax;
- long ___ds;
- long ___es;
- long ___orig_eax;
- long ___eip;
- long ___cs;
- long ___eflags;
- long ___esp;
- long ___ss;
- long ___vm86_es; /* This and the following only in vm86 mode */
- long ___vm86_ds;
- long ___vm86_fs;
- long ___vm86_gs;
-};
-#endif
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#define RTC_IRQ 8
-
-#endif /* _ASM_MC146818RTC_H */
+++ /dev/null
-#ifndef MCA_DMA_H
-#define MCA_DMA_H
-
-#include <asm/io.h>
-#include <linux/ioport.h>
-
-/*
- * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to
- * standard PC dma, but it certainly has its quirks. DMA register addresses
- * are in a different place and there are some added functions. Most of this
- * should be pretty obvious on inspection. Note that the user must divide
- * count by 2 when using 16-bit dma; that is not handled by these functions.
- *
- * Ramen Noodles are yummy.
- *
- * 1998 Tymm Twillman <tymm@computer.org>
- */
-
-/*
- * Registers that are used by the DMA controller; FN is the function register
- * (tell the controller what to do) and EXE is the execution register (how
- * to do it)
- */
-
-#define MCA_DMA_REG_FN 0x18
-#define MCA_DMA_REG_EXE 0x1A
-
-/*
- * Functions that the DMA controller can do
- */
-
-#define MCA_DMA_FN_SET_IO 0x00
-#define MCA_DMA_FN_SET_ADDR 0x20
-#define MCA_DMA_FN_GET_ADDR 0x30
-#define MCA_DMA_FN_SET_COUNT 0x40
-#define MCA_DMA_FN_GET_COUNT 0x50
-#define MCA_DMA_FN_GET_STATUS 0x60
-#define MCA_DMA_FN_SET_MODE 0x70
-#define MCA_DMA_FN_SET_ARBUS 0x80
-#define MCA_DMA_FN_MASK 0x90
-#define MCA_DMA_FN_RESET_MASK 0xA0
-#define MCA_DMA_FN_MASTER_CLEAR 0xD0
-
-/*
- * Modes (used by setting MCA_DMA_FN_MODE in the function register)
- *
- * Note that the MODE_READ is read from memory (write to device), and
- * MODE_WRITE is vice-versa.
- */
-
-#define MCA_DMA_MODE_XFER 0x04 /* read by default */
-#define MCA_DMA_MODE_READ 0x04 /* same as XFER */
-#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */
-#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */
-#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */
-
-
-/**
- * mca_enable_dma - channel to enable DMA on
- * @dmanr: DMA channel
- *
- * Enable the MCA bus DMA on a channel. This can be called from
- * IRQ context.
- */
-
-static __inline__ void mca_enable_dma(unsigned int dmanr)
-{
- outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- * mca_disble_dma - channel to disable DMA on
- * @dmanr: DMA channel
- *
- * Enable the MCA bus DMA on a channel. This can be called from
- * IRQ context.
- */
-
-static __inline__ void mca_disable_dma(unsigned int dmanr)
-{
- outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- * mca_set_dma_addr - load a 24bit DMA address
- * @dmanr: DMA channel
- * @a: 24bit bus address
- *
- * Load the address register in the DMA controller. This has a 24bit
- * limitation (16Mb).
- */
-
-static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
- outb(a & 0xff, MCA_DMA_REG_EXE);
- outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
- outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_get_dma_addr - load a 24bit DMA address
- * @dmanr: DMA channel
- *
- * Read the address register in the DMA controller. This has a 24bit
- * limitation (16Mb). The return is a bus address.
- */
-
-static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr)
-{
- unsigned int addr;
-
- outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
- addr = inb(MCA_DMA_REG_EXE);
- addr |= inb(MCA_DMA_REG_EXE) << 8;
- addr |= inb(MCA_DMA_REG_EXE) << 16;
-
- return addr;
-}
-
-/**
- * mca_set_dma_count - load a 16bit transfer count
- * @dmanr: DMA channel
- * @count: count
- *
- * Set the DMA count for this channel. This can be up to 64Kbytes.
- * Setting a count of zero will not do what you expect.
- */
-
-static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--; /* transfers one more than count -- correct for this */
-
- outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
- outb(count & 0xff, MCA_DMA_REG_EXE);
- outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_get_dma_residue - get the remaining bytes to transfer
- * @dmanr: DMA channel
- *
- * This function returns the number of bytes left to transfer
- * on this DMA channel.
- */
-
-static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr)
-{
- unsigned short count;
-
- outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
- count = 1 + inb(MCA_DMA_REG_EXE);
- count += inb(MCA_DMA_REG_EXE) << 8;
-
- return count;
-}
-
-/**
- * mca_set_dma_io - set the port for an I/O transfer
- * @dmanr: DMA channel
- * @io_addr: an I/O port number
- *
- * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
- * with an I/O port target.
- */
-
-static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
-{
- /*
- * DMA from a port address -- set the io address
- */
-
- outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
- outb(io_addr & 0xff, MCA_DMA_REG_EXE);
- outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- * mca_set_dma_mode - set the DMA mode
- * @dmanr: DMA channel
- * @mode: mode to set
- *
- * The DMA controller supports several modes. The mode values you can
- * set are :
- *
- * %MCA_DMA_MODE_READ when reading from the DMA device.
- *
- * %MCA_DMA_MODE_WRITE to writing to the DMA device.
- *
- * %MCA_DMA_MODE_IO to do DMA to or from an I/O port.
- *
- * %MCA_DMA_MODE_16 to do 16bit transfers.
- *
- */
-
-static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
- outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
- outb(mode, MCA_DMA_REG_EXE);
-}
-
-#endif /* MCA_DMA_H */
+++ /dev/null
-#ifndef __I386_MMAN_H__
-#define __I386_MMAN_H__
-
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_NONE 0x0 /* page can not be accessed */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
-#endif /* __I386_MMAN_H__ */
+++ /dev/null
-#ifndef _ASM_MMX_H
-#define _ASM_MMX_H
-
-/*
- * MMX 3Dnow! helper operations
- */
-
-#include <linux/types.h>
-
-extern void *_mmx_memcpy(void *to, const void *from, size_t size);
-extern void mmx_clear_page(void *page);
-extern void mmx_copy_page(void *to, void *from);
-
-#endif
+++ /dev/null
-#ifndef _ASM_I386_MODULE_H
-#define _ASM_I386_MODULE_H
-/*
- * This file contains the i386 architecture specific module code.
- */
-
-#define module_map(x) vmalloc(x)
-#define module_unmap(x) vfree(x)
-#define module_arch_init(x) (0)
-#define arch_init_modules(x) do { } while (0)
-
-#endif /* _ASM_I386_MODULE_H */
+++ /dev/null
-#ifndef __ASM_MPSPEC_H
-#define __ASM_MPSPEC_H
-
-/*
- * Structure definitions for SMP machines following the
- * Intel Multiprocessing Specification 1.1 and 1.4.
- */
-
-/*
- * This tag identifies where the SMP configuration
- * information is.
- */
-
-#define SMP_MAGIC_IDENT (('_'<<24)|('P'<<16)|('M'<<8)|'_')
-
-/*
- * a maximum of 16 APICs with the current APIC ID architecture.
- * xAPICs can have up to 256. SAPICs have 16 ID bits.
- */
-#ifdef CONFIG_X86_CLUSTERED_APIC
-#define MAX_APICS 256
-#else
-#define MAX_APICS 16
-#endif
-
-#define MAX_MPC_ENTRY 1024
-
-struct intel_mp_floating
-{
- char mpf_signature[4]; /* "_MP_" */
- unsigned long mpf_physptr; /* Configuration table address */
- unsigned char mpf_length; /* Our length (paragraphs) */
- unsigned char mpf_specification;/* Specification version */
- unsigned char mpf_checksum; /* Checksum (makes sum 0) */
- unsigned char mpf_feature1; /* Standard or configuration ? */
- unsigned char mpf_feature2; /* Bit7 set for IMCR|PIC */
- unsigned char mpf_feature3; /* Unused (0) */
- unsigned char mpf_feature4; /* Unused (0) */
- unsigned char mpf_feature5; /* Unused (0) */
-};
-
-struct mp_config_table
-{
- char mpc_signature[4];
-#define MPC_SIGNATURE "PCMP"
- unsigned short mpc_length; /* Size of table */
- char mpc_spec; /* 0x01 */
- char mpc_checksum;
- char mpc_oem[8];
- char mpc_productid[12];
- unsigned long mpc_oemptr; /* 0 if not present */
- unsigned short mpc_oemsize; /* 0 if not present */
- unsigned short mpc_oemcount;
- unsigned long mpc_lapic; /* APIC address */
- unsigned long reserved;
-};
-
-/* Followed by entries */
-
-#define MP_PROCESSOR 0
-#define MP_BUS 1
-#define MP_IOAPIC 2
-#define MP_INTSRC 3
-#define MP_LINTSRC 4
-#define MP_TRANSLATION 192 /* Used by IBM NUMA-Q to describe node locality */
-
-struct mpc_config_processor
-{
- unsigned char mpc_type;
- unsigned char mpc_apicid; /* Local APIC number */
- unsigned char mpc_apicver; /* Its versions */
- unsigned char mpc_cpuflag;
-#define CPU_ENABLED 1 /* Processor is available */
-#define CPU_BOOTPROCESSOR 2 /* Processor is the BP */
- unsigned long mpc_cpufeature;
-#define CPU_STEPPING_MASK 0x0F
-#define CPU_MODEL_MASK 0xF0
-#define CPU_FAMILY_MASK 0xF00
- unsigned long mpc_featureflag; /* CPUID feature value */
- unsigned long mpc_reserved[2];
-};
-
-struct mpc_config_bus
-{
- unsigned char mpc_type;
- unsigned char mpc_busid;
- unsigned char mpc_bustype[6] __attribute((packed));
-};
-
-/* List of Bus Type string values, Intel MP Spec. */
-#define BUSTYPE_EISA "EISA"
-#define BUSTYPE_ISA "ISA"
-#define BUSTYPE_INTERN "INTERN" /* Internal BUS */
-#define BUSTYPE_MCA "MCA"
-#define BUSTYPE_VL "VL" /* Local bus */
-#define BUSTYPE_PCI "PCI"
-#define BUSTYPE_PCMCIA "PCMCIA"
-#define BUSTYPE_CBUS "CBUS"
-#define BUSTYPE_CBUSII "CBUSII"
-#define BUSTYPE_FUTURE "FUTURE"
-#define BUSTYPE_MBI "MBI"
-#define BUSTYPE_MBII "MBII"
-#define BUSTYPE_MPI "MPI"
-#define BUSTYPE_MPSA "MPSA"
-#define BUSTYPE_NUBUS "NUBUS"
-#define BUSTYPE_TC "TC"
-#define BUSTYPE_VME "VME"
-#define BUSTYPE_XPRESS "XPRESS"
-
-struct mpc_config_ioapic
-{
- unsigned char mpc_type;
- unsigned char mpc_apicid;
- unsigned char mpc_apicver;
- unsigned char mpc_flags;
-#define MPC_APIC_USABLE 0x01
- unsigned long mpc_apicaddr;
-};
-
-struct mpc_config_intsrc
-{
- unsigned char mpc_type;
- unsigned char mpc_irqtype;
- unsigned short mpc_irqflag;
- unsigned char mpc_srcbus;
- unsigned char mpc_srcbusirq;
- unsigned char mpc_dstapic;
- unsigned char mpc_dstirq;
-};
-
-enum mp_irq_source_types {
- mp_INT = 0,
- mp_NMI = 1,
- mp_SMI = 2,
- mp_ExtINT = 3
-};
-
-#define MP_IRQDIR_DEFAULT 0
-#define MP_IRQDIR_HIGH 1
-#define MP_IRQDIR_LOW 3
-
-
-struct mpc_config_lintsrc
-{
- unsigned char mpc_type;
- unsigned char mpc_irqtype;
- unsigned short mpc_irqflag;
- unsigned char mpc_srcbusid;
- unsigned char mpc_srcbusirq;
- unsigned char mpc_destapic;
-#define MP_APIC_ALL 0xFF
- unsigned char mpc_destapiclint;
-};
-
-struct mp_config_oemtable
-{
- char oem_signature[4];
-#define MPC_OEM_SIGNATURE "_OEM"
- unsigned short oem_length; /* Size of table */
- char oem_rev; /* 0x01 */
- char oem_checksum;
- char mpc_oem[8];
-};
-
-struct mpc_config_translation
-{
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-/*
- * Default configurations
- *
- * 1 2 CPU ISA 82489DX
- * 2 2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
- * 3 2 CPU EISA 82489DX
- * 4 2 CPU MCA 82489DX
- * 5 2 CPU ISA+PCI
- * 6 2 CPU EISA+PCI
- * 7 2 CPU MCA+PCI
- */
-
-#ifdef CONFIG_MULTIQUAD
-#define MAX_IRQ_SOURCES 512
-#else /* !CONFIG_MULTIQUAD */
-#define MAX_IRQ_SOURCES 256
-#endif /* CONFIG_MULTIQUAD */
-
-#define MAX_MP_BUSSES 32
-enum mp_bustype {
- MP_BUS_ISA = 1,
- MP_BUS_EISA,
- MP_BUS_PCI,
- MP_BUS_MCA
-};
-extern int *mp_bus_id_to_type;
-extern int *mp_bus_id_to_node;
-extern int *mp_bus_id_to_local;
-extern int *mp_bus_id_to_pci_bus;
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-
-extern unsigned int boot_cpu_physical_apicid;
-extern unsigned long phys_cpu_present_map;
-extern int smp_found_config;
-extern void find_smp_config (void);
-extern void get_smp_config (void);
-extern int nr_ioapics;
-extern int apic_version [MAX_APICS];
-extern int mp_irq_entries;
-extern struct mpc_config_intsrc *mp_irqs;
-extern int mpc_default_type;
-extern int mp_current_pci_id;
-extern unsigned long mp_lapic_addr;
-extern int pic_mode;
-extern int using_apic_timer;
-
-#endif
-
+++ /dev/null
-#ifndef _I386_MSGBUF_H
-#define _I386_MSGBUF_H
-
-/*
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _I386_MSGBUF_H */
+++ /dev/null
-#ifndef __ASM_MSR_H
-#define __ASM_MSR_H
-
-/*
- * Access to machine-specific registers (available on 586 and better only)
- * Note: the rd* operations modify the parameters directly (without using
- * pointer indirection), this allows gcc to optimize better
- */
-
-#define rdmsr(msr,val1,val2) \
- __asm__ __volatile__("rdmsr" \
- : "=a" (val1), "=d" (val2) \
- : "c" (msr))
-
-#define wrmsr(msr,val1,val2) \
- __asm__ __volatile__("wrmsr" \
- : /* no outputs */ \
- : "c" (msr), "a" (val1), "d" (val2))
-
-#define rdtsc(low,high) \
- __asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))
-
-#define rdtscl(low) \
- __asm__ __volatile__("rdtsc" : "=a" (low) : : "edx")
-
-#define rdtscll(val) \
- __asm__ __volatile__("rdtsc" : "=A" (val))
-
-#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
-
-#define rdpmc(counter,low,high) \
- __asm__ __volatile__("rdpmc" \
- : "=a" (low), "=d" (high) \
- : "c" (counter))
-
-/* symbolic names for some interesting MSRs */
-/* Intel defined MSRs. */
-#define MSR_IA32_P5_MC_ADDR 0
-#define MSR_IA32_P5_MC_TYPE 1
-#define MSR_IA32_PLATFORM_ID 0x17
-#define MSR_IA32_EBL_CR_POWERON 0x2a
-
-#define MSR_IA32_APICBASE 0x1b
-#define MSR_IA32_APICBASE_BSP (1<<8)
-#define MSR_IA32_APICBASE_ENABLE (1<<11)
-#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
-
-#define MSR_IA32_UCODE_WRITE 0x79
-#define MSR_IA32_UCODE_REV 0x8b
-
-#define MSR_IA32_BBL_CR_CTL 0x119
-
-#define MSR_IA32_MCG_CAP 0x179
-#define MSR_IA32_MCG_STATUS 0x17a
-#define MSR_IA32_MCG_CTL 0x17b
-
-#define MSR_IA32_THERM_CONTROL 0x19a
-#define MSR_IA32_THERM_INTERRUPT 0x19b
-#define MSR_IA32_THERM_STATUS 0x19c
-#define MSR_IA32_MISC_ENABLE 0x1a0
-
-#define MSR_IA32_DEBUGCTLMSR 0x1d9
-#define MSR_IA32_LASTBRANCHFROMIP 0x1db
-#define MSR_IA32_LASTBRANCHTOIP 0x1dc
-#define MSR_IA32_LASTINTFROMIP 0x1dd
-#define MSR_IA32_LASTINTTOIP 0x1de
-
-#define MSR_IA32_MC0_CTL 0x400
-#define MSR_IA32_MC0_STATUS 0x401
-#define MSR_IA32_MC0_ADDR 0x402
-#define MSR_IA32_MC0_MISC 0x403
-
-#define MSR_P6_PERFCTR0 0xc1
-#define MSR_P6_PERFCTR1 0xc2
-#define MSR_P6_EVNTSEL0 0x186
-#define MSR_P6_EVNTSEL1 0x187
-
-/* AMD Defined MSRs */
-#define MSR_K6_EFER 0xC0000080
-#define MSR_K6_STAR 0xC0000081
-#define MSR_K6_WHCR 0xC0000082
-#define MSR_K6_UWCCR 0xC0000085
-#define MSR_K6_EPMR 0xC0000086
-#define MSR_K6_PSOR 0xC0000087
-#define MSR_K6_PFIR 0xC0000088
-
-#define MSR_K7_EVNTSEL0 0xC0010000
-#define MSR_K7_PERFCTR0 0xC0010004
-#define MSR_K7_HWCR 0xC0010015
-#define MSR_K7_CLK_CTL 0xC001001b
-#define MSR_K7_FID_VID_CTL 0xC0010041
-#define MSR_K7_VID_STATUS 0xC0010042
-
-/* Centaur-Hauls/IDT defined MSRs. */
-#define MSR_IDT_FCR1 0x107
-#define MSR_IDT_FCR2 0x108
-#define MSR_IDT_FCR3 0x109
-#define MSR_IDT_FCR4 0x10a
-
-#define MSR_IDT_MCR0 0x110
-#define MSR_IDT_MCR1 0x111
-#define MSR_IDT_MCR2 0x112
-#define MSR_IDT_MCR3 0x113
-#define MSR_IDT_MCR4 0x114
-#define MSR_IDT_MCR5 0x115
-#define MSR_IDT_MCR6 0x116
-#define MSR_IDT_MCR7 0x117
-#define MSR_IDT_MCR_CTRL 0x120
-
-/* VIA Cyrix defined MSRs*/
-#define MSR_VIA_FCR 0x1107
-#define MSR_VIA_LONGHAUL 0x110a
-#define MSR_VIA_BCR2 0x1147
-
-/* Transmeta defined MSRs */
-#define MSR_TMTA_LONGRUN_CTRL 0x80868010
-#define MSR_TMTA_LONGRUN_FLAGS 0x80868011
-#define MSR_TMTA_LRTI_READOUT 0x80868018
-#define MSR_TMTA_LRTI_VOLT_MHZ 0x8086801a
-
-#endif /* __ASM_MSR_H */
+++ /dev/null
-/* Generic MTRR (Memory Type Range Register) ioctls.
-
- Copyright (C) 1997-1999 Richard Gooch
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with this library; if not, write to the Free
- Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Richard Gooch may be reached by email at rgooch@atnf.csiro.au
- The postal address is:
- Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
-*/
-#ifndef _LINUX_MTRR_H
-#define _LINUX_MTRR_H
-
-#include <linux/config.h>
-#include <linux/ioctl.h>
-
-#define MTRR_IOCTL_BASE 'M'
-
-struct mtrr_sentry
-{
- unsigned long base; /* Base address */
- unsigned long size; /* Size of region */
- unsigned int type; /* Type of region */
-};
-
-struct mtrr_gentry
-{
- unsigned int regnum; /* Register number */
- unsigned long base; /* Base address */
- unsigned long size; /* Size of region */
- unsigned int type; /* Type of region */
-};
-
-/* These are the various ioctls */
-#define MTRRIOC_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry)
-#define MTRRIOC_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry)
-#define MTRRIOC_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry)
-#define MTRRIOC_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
-#define MTRRIOC_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry)
-#define MTRRIOC_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry)
-#define MTRRIOC_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry)
-#define MTRRIOC_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry)
-#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
-#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry)
-
-/* These are the region types */
-#define MTRR_TYPE_UNCACHABLE 0
-#define MTRR_TYPE_WRCOMB 1
-/*#define MTRR_TYPE_ 2*/
-/*#define MTRR_TYPE_ 3*/
-#define MTRR_TYPE_WRTHROUGH 4
-#define MTRR_TYPE_WRPROT 5
-#define MTRR_TYPE_WRBACK 6
-#define MTRR_NUM_TYPES 7
-
-#ifdef MTRR_NEED_STRINGS
-static char *mtrr_strings[MTRR_NUM_TYPES] =
-{
- "uncachable", /* 0 */
- "write-combining", /* 1 */
- "?", /* 2 */
- "?", /* 3 */
- "write-through", /* 4 */
- "write-protect", /* 5 */
- "write-back", /* 6 */
-};
-#endif
-
-#ifdef __KERNEL__
-
-/* The following functions are for use by other drivers */
-# ifdef CONFIG_MTRR
-extern int mtrr_add (unsigned long base, unsigned long size,
- unsigned int type, char increment);
-extern int mtrr_add_page (unsigned long base, unsigned long size,
- unsigned int type, char increment);
-extern int mtrr_del (int reg, unsigned long base, unsigned long size);
-extern int mtrr_del_page (int reg, unsigned long base, unsigned long size);
-extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
-# else
-static __inline__ int mtrr_add (unsigned long base, unsigned long size,
- unsigned int type, char increment)
-{
- return -ENODEV;
-}
-static __inline__ int mtrr_add_page (unsigned long base, unsigned long size,
- unsigned int type, char increment)
-{
- return -ENODEV;
-}
-static __inline__ int mtrr_del (int reg, unsigned long base,
- unsigned long size)
-{
- return -ENODEV;
-}
-static __inline__ int mtrr_del_page (int reg, unsigned long base,
- unsigned long size)
-{
- return -ENODEV;
-}
-
-static __inline__ void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) {;}
-
-# endif
-
-/* The following functions are for initialisation: don't use them! */
-extern int mtrr_init (void);
-# if defined(CONFIG_SMP) && defined(CONFIG_MTRR)
-extern void mtrr_init_boot_cpu (void);
-extern void mtrr_init_secondary_cpu (void);
-# endif
-
-#endif
-
-#endif /* _LINUX_MTRR_H */
+++ /dev/null
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-i386/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __I386_NAMEI_H
-#define __I386_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __I386_NAMEI_H */
+++ /dev/null
-#ifndef _ASMi386_PARAM_H
-#define _ASMi386_PARAM_H
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NGROUPS
-#define NGROUPS 32
-#endif
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#ifdef __KERNEL__
-# define CLOCKS_PER_SEC 100 /* frequency at which times() counts */
-#endif
-
-#endif
+++ /dev/null
-/*
- * parport.h: ia32-specific parport initialisation
- *
- * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef _ASM_I386_PARPORT_H
-#define _ASM_I386_PARPORT_H 1
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
- return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASM_I386_PARPORT_H) */
+++ /dev/null
-#ifndef __i386_POLL_H
-#define __i386_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+++ /dev/null
-#ifndef __ARCH_I386_POSIX_TYPES_H
-#define __ARCH_I386_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_dev_t;
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(fd,fdsetp) \
- __asm__ __volatile__("btsl %1,%0": \
- "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
-
-#undef __FD_CLR
-#define __FD_CLR(fd,fdsetp) \
- __asm__ __volatile__("btrl %1,%0": \
- "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
-
-#undef __FD_ISSET
-#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
- unsigned char __result; \
- __asm__ __volatile__("btl %1,%2 ; setb %0" \
- :"=q" (__result) :"r" ((int) (fd)), \
- "m" (*(__kernel_fd_set *) (fdsetp))); \
- __result; }))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) \
-do { \
- int __d0, __d1; \
- __asm__ __volatile__("cld ; rep ; stosl" \
- :"=m" (*(__kernel_fd_set *) (fdsetp)), \
- "=&c" (__d0), "=&D" (__d1) \
- :"a" (0), "1" (__FDSET_LONGS), \
- "2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
-} while (0)
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif
+++ /dev/null
-#ifndef _I386_RESOURCE_H
-#define _I386_RESOURCE_H
-
-/*
- * Resource limits
- */
-
-#define RLIMIT_CPU 0 /* CPU time in ms */
-#define RLIMIT_FSIZE 1 /* Maximum filesize */
-#define RLIMIT_DATA 2 /* max data size */
-#define RLIMIT_STACK 3 /* max stack size */
-#define RLIMIT_CORE 4 /* max core file size */
-#define RLIMIT_RSS 5 /* max resident set size */
-#define RLIMIT_NPROC 6 /* max number of processes */
-#define RLIMIT_NOFILE 7 /* max number of open files */
-#define RLIMIT_MEMLOCK 8 /* max locked-in-memory address space */
-#define RLIMIT_AS 9 /* address space limit */
-#define RLIMIT_LOCKS 10 /* maximum file locks held */
-
-#define RLIM_NLIMITS 11
-
-/*
- * SuS says limits have to be unsigned.
- * Which makes a ton more sense anyway.
- */
-#define RLIM_INFINITY (~0UL)
-
-#ifdef __KERNEL__
-
-#define INIT_RLIMITS \
-{ \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { _STK_LIM, RLIM_INFINITY }, \
- { 0, RLIM_INFINITY }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { 0, 0 }, \
- { INR_OPEN, INR_OPEN }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
- { RLIM_INFINITY, RLIM_INFINITY }, \
-}
-
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-/* include/asm-i386/rwlock.h
- *
- * Helpers used by both rw spinlocks and rw semaphores.
- *
- * Based in part on code from semaphore.h and
- * spinlock.h Copyright 1996 Linus Torvalds.
- *
- * Copyright 1999 Red Hat, Inc.
- *
- * Written by Benjamin LaHaise.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_I386_RWLOCK_H
-#define _ASM_I386_RWLOCK_H
-
-#define RW_LOCK_BIAS 0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __build_read_lock_ptr(rw, helper) \
- asm volatile(LOCK "subl $1,(%0)\n\t" \
- "js 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tcall " helper "\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- ::"a" (rw) : "memory")
-
-#define __build_read_lock_const(rw, helper) \
- asm volatile(LOCK "subl $1,%0\n\t" \
- "js 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tpushl %%eax\n\t" \
- "leal %0,%%eax\n\t" \
- "call " helper "\n\t" \
- "popl %%eax\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- :"=m" (*(volatile int *)rw) : : "memory")
-
-#define __build_read_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_read_lock_const(rw, helper); \
- else \
- __build_read_lock_ptr(rw, helper); \
- } while (0)
-
-#define __build_write_lock_ptr(rw, helper) \
- asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
- "jnz 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tcall " helper "\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- ::"a" (rw) : "memory")
-
-#define __build_write_lock_const(rw, helper) \
- asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
- "jnz 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tpushl %%eax\n\t" \
- "leal %0,%%eax\n\t" \
- "call " helper "\n\t" \
- "popl %%eax\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- :"=m" (*(volatile int *)rw) : : "memory")
-
-#define __build_write_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_write_lock_const(rw, helper); \
- else \
- __build_write_lock_ptr(rw, helper); \
- } while (0)
-
-#endif
+++ /dev/null
-/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+
- *
- * Written by David Howells (dhowells@redhat.com).
- *
- * Derived from asm-i386/semaphore.h
- *
- * Trylock by Brian Watson (Brian.J.Watson@compaq.com).
- *
- *
- * The MSW of the count is the negated number of active writers and waiting
- * lockers, and the LSW is the total number of active locks
- *
- * The lock count is initialized to 0 (no active and no waiting lockers).
- *
- * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
- * uncontended lock. This can be determined because XADD returns the old value.
- * Readers increment by 1 and see a positive value when uncontended, negative
- * if there are writers (and maybe) readers waiting (in which case it goes to
- * sleep).
- *
- * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
- * be extended to 65534 by manually checking the whole MSW rather than relying
- * on the S flag.
- *
- * The value of ACTIVE_BIAS supports up to 65535 active processes.
- *
- * This should be totally fair - if anything is waiting, a process that wants a
- * lock will go to the back of the queue. When the currently active lock is
- * released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
- * front, then they'll all be woken up, but no other readers will be.
- */
-
-#ifndef _I386_RWSEM_H
-#define _I386_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error please dont include asm/rwsem.h directly, use linux/rwsem.h instead
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-struct rwsem_waiter;
-
-extern struct rw_semaphore *FASTCALL(rwsem_down_read_failed(struct rw_semaphore *sem));
-extern struct rw_semaphore *FASTCALL(rwsem_down_write_failed(struct rw_semaphore *sem));
-extern struct rw_semaphore *FASTCALL(rwsem_wake(struct rw_semaphore *));
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
- signed long count;
-#define RWSEM_UNLOCKED_VALUE 0x00000000
-#define RWSEM_ACTIVE_BIAS 0x00000001
-#define RWSEM_ACTIVE_MASK 0x0000ffff
-#define RWSEM_WAITING_BIAS (-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
- spinlock_t wait_lock;
- struct list_head wait_list;
-#if RWSEM_DEBUG
- int debug;
-#endif
-};
-
-/*
- * initialisation
- */
-#if RWSEM_DEBUG
-#define __RWSEM_DEBUG_INIT , 0
-#else
-#define __RWSEM_DEBUG_INIT /* */
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
- __RWSEM_DEBUG_INIT }
-
-#define DECLARE_RWSEM(name) \
- struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-static inline void init_rwsem(struct rw_semaphore *sem)
-{
- sem->count = RWSEM_UNLOCKED_VALUE;
- spin_lock_init(&sem->wait_lock);
- INIT_LIST_HEAD(&sem->wait_list);
-#if RWSEM_DEBUG
- sem->debug = 0;
-#endif
-}
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
- __asm__ __volatile__(
- "# beginning down_read\n\t"
-LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old value */
- " js 2f\n\t" /* jump if we weren't granted the lock */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " pushl %%ecx\n\t"
- " pushl %%edx\n\t"
- " call rwsem_down_read_failed\n\t"
- " popl %%edx\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
- "# ending down_read\n\t"
- : "+m"(sem->count)
- : "a"(sem)
- : "memory", "cc");
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
- __s32 result, tmp;
- __asm__ __volatile__(
- "# beginning __down_read_trylock\n\t"
- " movl %0,%1\n\t"
- "1:\n\t"
- " movl %1,%2\n\t"
- " addl %3,%2\n\t"
- " jle 2f\n\t"
-LOCK_PREFIX " cmpxchgl %2,%0\n\t"
- " jnz 1b\n\t"
- "2:\n\t"
- "# ending __down_read_trylock\n\t"
- : "+m"(sem->count), "=&a"(result), "=&r"(tmp)
- : "i"(RWSEM_ACTIVE_READ_BIAS)
- : "memory", "cc");
- return result>=0 ? 1 : 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write(struct rw_semaphore *sem)
-{
- int tmp;
-
- tmp = RWSEM_ACTIVE_WRITE_BIAS;
- __asm__ __volatile__(
- "# beginning down_write\n\t"
-LOCK_PREFIX " xadd %0,(%%eax)\n\t" /* subtract 0x0000ffff, returns the old value */
- " testl %0,%0\n\t" /* was the count 0 before? */
- " jnz 2f\n\t" /* jump if we weren't granted the lock */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " pushl %%ecx\n\t"
- " call rwsem_down_write_failed\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
- "# ending down_write"
- : "+d"(tmp), "+m"(sem->count)
- : "a"(sem)
- : "memory", "cc");
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
- signed long ret = cmpxchg(&sem->count,
- RWSEM_UNLOCKED_VALUE,
- RWSEM_ACTIVE_WRITE_BIAS);
- if (ret == RWSEM_UNLOCKED_VALUE)
- return 1;
- return 0;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
- __s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
- __asm__ __volatile__(
- "# beginning __up_read\n\t"
-LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old value */
- " js 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " decw %%dx\n\t" /* do nothing if still outstanding active readers */
- " jnz 1b\n\t"
- " pushl %%ecx\n\t"
- " call rwsem_wake\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
- "# ending __up_read\n"
- : "+m"(sem->count), "+d"(tmp)
- : "a"(sem)
- : "memory", "cc");
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
- __asm__ __volatile__(
- "# beginning __up_write\n\t"
- " movl %2,%%edx\n\t"
-LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */
- " jnz 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " decw %%dx\n\t" /* did the active count reduce to 0? */
- " jnz 1b\n\t" /* jump back if not */
- " pushl %%ecx\n\t"
- " call rwsem_wake\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
- "# ending __up_write\n"
- : "+m"(sem->count)
- : "a"(sem), "i"(-RWSEM_ACTIVE_WRITE_BIAS)
- : "memory", "cc", "edx");
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
- __asm__ __volatile__(
-LOCK_PREFIX "addl %1,%0"
- :"=m"(sem->count)
- :"ir"(delta), "m"(sem->count));
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
- int tmp = delta;
-
- __asm__ __volatile__(
-LOCK_PREFIX "xadd %0,(%2)"
- : "+r"(tmp), "=m"(sem->count)
- : "r"(sem), "m"(sem->count)
- : "memory");
-
- return tmp+delta;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _I386_RWSEM_H */
+++ /dev/null
-#ifndef _I386_SCATTERLIST_H
-#define _I386_SCATTERLIST_H
-
-/*
- * Drivers must set either ->address or (preferred) ->page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using ->page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to ->page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg->page = virt_to_page(some_ptr);
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
- char * address; /* Location data is to be transferred to, NULL for
- * highmem page */
- struct page * page; /* Location for highmem page, if any */
- unsigned int offset;/* for highmem, page offset */
-
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
-#endif /* !(_I386_SCATTERLIST_H) */
+++ /dev/null
-#ifndef _I386_SEMAPHORE_H
-#define _I386_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#ifdef __KERNEL__
-
-/*
- * SMP- and interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * Modified 1996-12-23 by Dave Grothe <dave@gcom.com> to fix bugs in
- * the original code and to make semaphore waits
- * interruptible so that processes waiting on
- * semaphores can be killed.
- * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper
- * functions in asm/sempahore-helper.h while fixing a
- * potential and subtle race discovered by Ulrich Schmid
- * in down_interruptible(). Since I started to play here I
- * also implemented the `trylock' semaphore operation.
- * 1999-07-02 Artur Skawina <skawina@geocities.com>
- * Optimized "0(ecx)" -> "(ecx)" (the assembler does not
- * do this). Changed calling sequences from push/jmp to
- * traditional call/ret.
- * Modified 2001-01-01 Andreas Franck <afranck@gmx.de>
- * Some hacks to ensure compatibility with recent
- * GCC snapshots, to avoid stack corruption when compiling
- * with -fomit-frame-pointer. It's not sure if this will
- * be fixed in GCC, as our previous implementation was a
- * bit dubious.
- *
- * If you would like to see an analysis of this implementation, please
- * ftp to gcom.com and download the file
- * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz.
- *
- */
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-#if WAITQUEUE_DEBUG
- long __magic;
-#endif
-};
-
-#if WAITQUEUE_DEBUG
-# define __SEM_DEBUG_INIT(name) \
- , (int)&(name).__magic
-#else
-# define __SEM_DEBUG_INIT(name)
-#endif
-
-#define __SEMAPHORE_INITIALIZER(name,count) \
-{ ATOMIC_INIT(count), 0, __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
- __SEM_DEBUG_INIT(name) }
-
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
-/*
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well.
- */
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-#if WAITQUEUE_DEBUG
- sem->__magic = (int)&sem->__magic;
-#endif
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/i386/kernel/semaphore.c
- */
-static inline void down(struct semaphore * sem)
-{
-#if WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- __asm__ __volatile__(
- "# atomic down operation\n\t"
- LOCK "decl %0\n\t" /* --sem->count */
- "js 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- :"=m" (sem->count)
- :"c" (sem)
- :"memory");
-}
-
-/*
- * Interruptible try to acquire a semaphore. If we obtained
- * it, return zero. If we were interrupted, returns -EINTR
- */
-static inline int down_interruptible(struct semaphore * sem)
-{
- int result;
-
-#if WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- LOCK "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed_interruptible\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- :"=a" (result), "=m" (sem->count)
- :"c" (sem)
- :"memory");
- return result;
-}
-
-/*
- * Non-blockingly attempt to down() a semaphore.
- * Returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- int result;
-
-#if WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- LOCK "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed_trylock\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- :"=a" (result), "=m" (sem->count)
- :"c" (sem)
- :"memory");
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
-#if WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
- __asm__ __volatile__(
- "# atomic up operation\n\t"
- LOCK "incl %0\n\t" /* ++sem->count */
- "jle 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __up_wakeup\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- ".subsection 0\n"
- :"=m" (sem->count)
- :"c" (sem)
- :"memory");
-}
-
-static inline int sem_getcount(struct semaphore *sem)
-{
- return atomic_read(&sem->count);
-}
-
-#endif
-#endif
+++ /dev/null
-#ifndef _I386_SEMBUF_H
-#define _I386_SEMBUF_H
-
-/*
- * The semid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _I386_SEMBUF_H */
+++ /dev/null
-/*
- * include/asm-i386/serial.h
- */
-
-#include <linux/config.h>
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE
-#endif
-
-#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
-
-/*
- * HCDP_SERIAL_PORT_DEFNS should be placed in exactly the same slot
- * in rs_table as defined by HCDP_SERIAL_CONSOLE_PORT in
- * include/linux/serial.h
- */
-#define HCDP_SERIAL_PORT_DEFNS \
- { 0, BASE_BAUD, -1, 0, STD_COM_FLAGS}, /* ttySx device
- in comments sucks.
- You add an entry
- and you get to edit
- boatloads of these
- comments. Not worth
- it */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS \
- { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
- { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
- { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
- { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
- { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
- { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
- { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
- { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
- { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
- { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
- { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
- { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
- { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
- { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
- { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
- { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
- { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
- { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
- { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
- { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
- { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
- { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
- { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
- { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
- { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
- { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS \
- STD_SERIAL_PORT_DEFNS \
- HCDP_SERIAL_PORT_DEFNS \
- EXTRA_SERIAL_PORT_DEFNS \
- HUB6_SERIAL_PORT_DFNS \
- MCA_SERIAL_PORT_DFNS
-
+++ /dev/null
-/*
- * Just a place holder. We don't want to have to test x86 before
- * we include stuff
- */
-
-#ifndef _i386_SETUP_H
-#define _i386_SETUP_H
-
-
-#endif /* _i386_SETUP_H */
+++ /dev/null
-#ifndef _I386_SHMBUF_H
-#define _I386_SHMBUF_H
-
-/*
- * The shmid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _I386_SHMBUF_H */
+++ /dev/null
-#ifndef _ASMI386_SHMPARAM_H
-#define _ASMI386_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASMI386_SHMPARAM_H */
+++ /dev/null
-#ifndef _ASMi386_SIGCONTEXT_H
-#define _ASMi386_SIGCONTEXT_H
-
-/*
- * As documented in the iBCS2 standard..
- *
- * The first part of "struct _fpstate" is just the normal i387
- * hardware setup, the extra "status" word is used to save the
- * coprocessor status word before entering the handler.
- *
- * Pentium III FXSR, SSE support
- * Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * The FPU state data structure has had to grow to accomodate the
- * extended FPU state required by the Streaming SIMD Extensions.
- * There is no documented standard to accomplish this at the moment.
- */
-struct _fpreg {
- unsigned short significand[4];
- unsigned short exponent;
-};
-
-struct _fpxreg {
- unsigned short significand[4];
- unsigned short exponent;
- unsigned short padding[3];
-};
-
-struct _xmmreg {
- unsigned long element[4];
-};
-
-struct _fpstate {
- /* Regular FPU environment */
- unsigned long cw;
- unsigned long sw;
- unsigned long tag;
- unsigned long ipoff;
- unsigned long cssel;
- unsigned long dataoff;
- unsigned long datasel;
- struct _fpreg _st[8];
- unsigned short status;
- unsigned short magic; /* 0xffff = regular FPU data only */
-
- /* FXSR FPU environment */
- unsigned long _fxsr_env[6]; /* FXSR FPU env is ignored */
- unsigned long mxcsr;
- unsigned long reserved;
- struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */
- struct _xmmreg _xmm[8];
- unsigned long padding[56];
-};
-
-#define X86_FXSR_MAGIC 0x0000
-
-struct sigcontext {
- unsigned short gs, __gsh;
- unsigned short fs, __fsh;
- unsigned short es, __esh;
- unsigned short ds, __dsh;
- unsigned long edi;
- unsigned long esi;
- unsigned long ebp;
- unsigned long esp;
- unsigned long ebx;
- unsigned long edx;
- unsigned long ecx;
- unsigned long eax;
- unsigned long trapno;
- unsigned long err;
- unsigned long eip;
- unsigned short cs, __csh;
- unsigned long eflags;
- unsigned long esp_at_signal;
- unsigned short ss, __ssh;
- struct _fpstate * fpstate;
- unsigned long oldmask;
- unsigned long cr2;
-};
-
-
-#endif
+++ /dev/null
-#ifndef _I386_SIGINFO_H
-#define _I386_SIGINFO_H
-
-#include <linux/types.h>
-
-/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
-
-typedef union sigval {
- int sival_int;
- void *sival_ptr;
-} sigval_t;
-
-#define SI_MAX_SIZE 128
-#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
-
-typedef struct siginfo {
- int si_signo;
- int si_errno;
- int si_code;
-
- union {
- int _pad[SI_PAD_SIZE];
-
- /* kill() */
- struct {
- pid_t _pid; /* sender's pid */
- uid_t _uid; /* sender's uid */
- } _kill;
-
- /* POSIX.1b timers */
- struct {
- unsigned int _timer1;
- unsigned int _timer2;
- } _timer;
-
- /* POSIX.1b signals */
- struct {
- pid_t _pid; /* sender's pid */
- uid_t _uid; /* sender's uid */
- sigval_t _sigval;
- } _rt;
-
- /* SIGCHLD */
- struct {
- pid_t _pid; /* which child */
- uid_t _uid; /* sender's uid */
- int _status; /* exit code */
- clock_t _utime;
- clock_t _stime;
- } _sigchld;
-
- /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
- struct {
- void *_addr; /* faulting insn/memory ref. */
- } _sigfault;
-
- /* SIGPOLL */
- struct {
- int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
- int _fd;
- } _sigpoll;
- } _sifields;
-} siginfo_t;
-
-/*
- * How these fields are to be accessed.
- */
-#define si_pid _sifields._kill._pid
-#define si_uid _sifields._kill._uid
-#define si_status _sifields._sigchld._status
-#define si_utime _sifields._sigchld._utime
-#define si_stime _sifields._sigchld._stime
-#define si_value _sifields._rt._sigval
-#define si_int _sifields._rt._sigval.sival_int
-#define si_ptr _sifields._rt._sigval.sival_ptr
-#define si_addr _sifields._sigfault._addr
-#define si_band _sifields._sigpoll._band
-#define si_fd _sifields._sigpoll._fd
-
-#ifdef __KERNEL__
-#define __SI_MASK 0xffff0000
-#define __SI_KILL (0 << 16)
-#define __SI_TIMER (1 << 16)
-#define __SI_POLL (2 << 16)
-#define __SI_FAULT (3 << 16)
-#define __SI_CHLD (4 << 16)
-#define __SI_RT (5 << 16)
-#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
-#else
-#define __SI_KILL 0
-#define __SI_TIMER 0
-#define __SI_POLL 0
-#define __SI_FAULT 0
-#define __SI_CHLD 0
-#define __SI_RT 0
-#define __SI_CODE(T,N) (N)
-#endif
-
-/*
- * si_code values
- * Digital reserves positive values for kernel-generated signals.
- */
-#define SI_USER 0 /* sent by kill, sigsend, raise */
-#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
-#define SI_QUEUE -1 /* sent by sigqueue */
-#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
-#define SI_MESGQ -3 /* sent by real time mesq state change */
-#define SI_ASYNCIO -4 /* sent by AIO completion */
-#define SI_SIGIO -5 /* sent by queued SIGIO */
-#define SI_TKILL -6 /* sent by tkill system call */
-
-#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
-#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
-
-/*
- * SIGILL si_codes
- */
-#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
-#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
-#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
-#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
-#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
-#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
-#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
-#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
-#define NSIGILL 8
-
-/*
- * SIGFPE si_codes
- */
-#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
-#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
-#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
-#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
-#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
-#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
-#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
-#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
-#define NSIGFPE 8
-
-/*
- * SIGSEGV si_codes
- */
-#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
-#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
-#define NSIGSEGV 2
-
-/*
- * SIGBUS si_codes
- */
-#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
-#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
-#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
-#define NSIGBUS 3
-
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
-#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
-#define NSIGTRAP 2
-
-/*
- * SIGCHLD si_codes
- */
-#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
-#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
-#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
-#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
-#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
-#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
-#define NSIGCHLD 6
-
-/*
- * SIGPOLL si_codes
- */
-#define POLL_IN (__SI_POLL|1) /* data input available */
-#define POLL_OUT (__SI_POLL|2) /* output buffers available */
-#define POLL_MSG (__SI_POLL|3) /* input message available */
-#define POLL_ERR (__SI_POLL|4) /* i/o error */
-#define POLL_PRI (__SI_POLL|5) /* high priority input available */
-#define POLL_HUP (__SI_POLL|6) /* device disconnected */
-#define NSIGPOLL 6
-
-/*
- * sigevent definitions
- *
- * It seems likely that SIGEV_THREAD will have to be handled from
- * userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
- * thread manager then catches and does the appropriate nonsense.
- * However, everything is written out here so as to not get lost.
- */
-#define SIGEV_SIGNAL 0 /* notify via signal */
-#define SIGEV_NONE 1 /* other notification: meaningless */
-#define SIGEV_THREAD 2 /* deliver via thread creation */
-
-#define SIGEV_MAX_SIZE 64
-#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
-
-typedef struct sigevent {
- sigval_t sigev_value;
- int sigev_signo;
- int sigev_notify;
- union {
- int _pad[SIGEV_PAD_SIZE];
-
- struct {
- void (*_function)(sigval_t);
- void *_attribute; /* really pthread_attr_t */
- } _sigev_thread;
- } _sigev_un;
-} sigevent_t;
-
-#define sigev_notify_function _sigev_un._sigev_thread._function
-#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-
-static inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
-{
- if (from->si_code < 0)
- memcpy(to, from, sizeof(siginfo_t));
- else
- /* _sigchld is currently the largest know union member */
- memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
-
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-#ifndef _ASMi386_SIGNAL_H
-#define _ASMi386_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
-#define SIG_BLOCK 0 /* for blocking signals */
-#define SIG_UNBLOCK 1 /* for unblocking signals */
-#define SIG_SETMASK 2 /* for setting the signal mask */
-
-/* Type of a signal handler. */
-typedef void (*__sighandler_t)(int);
-
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define __HAVE_ARCH_SIG_BITOPS
-
-static __inline__ void sigaddset(sigset_t *set, int _sig)
-{
- __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
-}
-
-static __inline__ void sigdelset(sigset_t *set, int _sig)
-{
- __asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc");
-}
-
-static __inline__ int __const_sigismember(sigset_t *set, int _sig)
-{
- unsigned long sig = _sig - 1;
- return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static __inline__ int __gen_sigismember(sigset_t *set, int _sig)
-{
- int ret;
- __asm__("btl %2,%1\n\tsbbl %0,%0"
- : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
- return ret;
-}
-
-#define sigismember(set,sig) \
- (__builtin_constant_p(sig) ? \
- __const_sigismember((set),(sig)) : \
- __gen_sigismember((set),(sig)))
-
-#define sigmask(sig) (1UL << ((sig) - 1))
-
-static __inline__ int sigfindinword(unsigned long word)
-{
- __asm__("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
- return word;
-}
-
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-#ifndef __ASM_SMPLOCK_H
-#define __ASM_SMPLOCK_H
-
-/*
- * <asm/smplock.h>
- *
- * i386 SMP lock implementation
- */
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <asm/current.h>
-
-extern spinlock_cacheline_t kernel_flag_cacheline;
-#define kernel_flag kernel_flag_cacheline.lock
-
-#define kernel_locked() spin_is_locked(&kernel_flag)
-
-/*
- * Release global kernel lock and global interrupt lock
- */
-#define release_kernel_lock(task, cpu) \
-do { \
- if (task->lock_depth >= 0) \
- spin_unlock(&kernel_flag); \
- release_irqlock(cpu); \
- __sti(); \
-} while (0)
-
-/*
- * Re-acquire the kernel lock
- */
-#define reacquire_kernel_lock(task) \
-do { \
- if (task->lock_depth >= 0) \
- spin_lock(&kernel_flag); \
-} while (0)
-
-
-/*
- * Getting the big kernel lock.
- *
- * This cannot happen asynchronously,
- * so we only need to worry about other
- * CPU's.
- */
-static __inline__ void lock_kernel(void)
-{
-#if 1
- if (!++current->lock_depth)
- spin_lock(&kernel_flag);
-#else
- __asm__ __volatile__(
- "incl %1\n\t"
- "jne 9f"
- spin_lock_string
- "\n9:"
- :"=m" (__dummy_lock(&kernel_flag)),
- "=m" (current->lock_depth));
-#endif
-}
-
-static __inline__ void unlock_kernel(void)
-{
- if (current->lock_depth < 0)
- out_of_line_bug();
-#if 1
- if (--current->lock_depth < 0)
- spin_unlock(&kernel_flag);
-#else
- __asm__ __volatile__(
- "decl %1\n\t"
- "jns 9f\n\t"
- spin_unlock_string
- "\n9:"
- :"=m" (__dummy_lock(&kernel_flag)),
- "=m" (current->lock_depth));
-#endif
-}
-
-#endif /* __ASM_SMPLOCK_H */
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-/* Nasty libc5 fixup - bletch */
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-/* Socket types. */
-#define SOCK_STREAM 1 /* stream (connection) socket */
-#define SOCK_DGRAM 2 /* datagram (conn.less) socket */
-#define SOCK_RAW 3 /* raw socket */
-#define SOCK_RDM 4 /* reliably-delivered message */
-#define SOCK_SEQPACKET 5 /* sequential packet socket */
-#define SOCK_PACKET 10 /* linux specific way of */
- /* getting packets at the dev */
- /* level. For writing rarp and */
- /* other similar things on the */
- /* user level. */
-#define SOCK_MAX (SOCK_PACKET+1)
-#endif
-
-#endif /* _ASM_SOCKET_H */
+++ /dev/null
-#ifndef __ARCH_I386_SOCKIOS__
-#define __ARCH_I386_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp */
-
-#endif
+++ /dev/null
-#ifndef __ASM_SOFTIRQ_H
-#define __ASM_SOFTIRQ_H
-
-#include <asm/atomic.h>
-#include <asm/hardirq.h>
-
-#define __cpu_bh_enable(cpu) \
- do { barrier(); local_bh_count(cpu)--; } while (0)
-#define cpu_bh_disable(cpu) \
- do { local_bh_count(cpu)++; barrier(); } while (0)
-
-#define local_bh_disable() cpu_bh_disable(smp_processor_id())
-#define __local_bh_enable() __cpu_bh_enable(smp_processor_id())
-
-#define in_softirq() (local_bh_count(smp_processor_id()) != 0)
-
-/*
- * NOTE: this assembly code assumes:
- *
- * (char *)&local_bh_count - 8 == (char *)&softirq_pending
- *
- * If you change the offsets in irq_stat then you have to
- * update this code as well.
- */
-#define local_bh_enable() \
-do { \
- unsigned int *ptr = &local_bh_count(smp_processor_id()); \
- \
- barrier(); \
- if (!--*ptr) \
- __asm__ __volatile__ ( \
- "cmpl $0, -8(%0);" \
- "jnz 2f;" \
- "1:;" \
- \
- LOCK_SECTION_START("") \
- "2: pushl %%eax; pushl %%ecx; pushl %%edx;" \
- "call %c1;" \
- "popl %%edx; popl %%ecx; popl %%eax;" \
- "jmp 1b;" \
- LOCK_SECTION_END \
- \
- : /* no output */ \
- : "r" (ptr), "i" (do_softirq) \
- /* no registers clobbered */ ); \
-} while (0)
-
-#endif /* __ASM_SOFTIRQ_H */
+++ /dev/null
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <asm/atomic.h>
-#include <asm/rwlock.h>
-#include <asm/page.h>
-#include <linux/config.h>
-
-extern int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
-
-/* It seems that people are forgetting to
- * initialize their spinlocks properly, tsk tsk.
- * Remember to turn this off in 2.4. -ben
- */
-#if defined(CONFIG_DEBUG_SPINLOCK)
-#define SPINLOCK_DEBUG 1
-#else
-#define SPINLOCK_DEBUG 0
-#endif
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-typedef struct {
- volatile unsigned int lock;
-#if SPINLOCK_DEBUG
- unsigned magic;
-#endif
-} spinlock_t;
-
-#define SPINLOCK_MAGIC 0xdead4ead
-
-#if SPINLOCK_DEBUG
-#define SPINLOCK_MAGIC_INIT , SPINLOCK_MAGIC
-#else
-#define SPINLOCK_MAGIC_INIT /* */
-#endif
-
-#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
-
-#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
-
-/*
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-
-#define spin_is_locked(x) (*(volatile signed char *)(&(x)->lock) <= 0)
-#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
-
-#define spin_lock_string \
- "\n1:\t" \
- "lock ; decb %0\n\t" \
- "js 2f\n" \
- LOCK_SECTION_START("") \
- "2:\t" \
- "cmpb $0,%0\n\t" \
- "rep;nop\n\t" \
- "jle 2b\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END
-
-/*
- * This works. Despite all the confusion.
- * (except on PPro SMP or if we are using OOSTORE)
- * (PPro errata 66, 92)
- */
-
-#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
-
-#define spin_unlock_string \
- "movb $1,%0" \
- :"=m" (lock->lock) : : "memory"
-
-
-static inline void spin_unlock(spinlock_t *lock)
-{
-#if SPINLOCK_DEBUG
- if (lock->magic != SPINLOCK_MAGIC)
- BUG();
- if (!spin_is_locked(lock))
- BUG();
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#else
-
-#define spin_unlock_string \
- "xchgb %b0, %1" \
- :"=q" (oldval), "=m" (lock->lock) \
- :"0" (oldval) : "memory"
-
-static inline void spin_unlock(spinlock_t *lock)
-{
- char oldval = 1;
-#if SPINLOCK_DEBUG
- if (lock->magic != SPINLOCK_MAGIC)
- BUG();
- if (!spin_is_locked(lock))
- BUG();
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#endif
-
-static inline int spin_trylock(spinlock_t *lock)
-{
- char oldval;
- __asm__ __volatile__(
- "xchgb %b0,%1"
- :"=q" (oldval), "=m" (lock->lock)
- :"0" (0) : "memory");
- return oldval > 0;
-}
-
-static inline void spin_lock(spinlock_t *lock)
-{
-#if SPINLOCK_DEBUG
- __label__ here;
-here:
- if (lock->magic != SPINLOCK_MAGIC) {
-printk("eip: %p\n", &&here);
- BUG();
- }
-#endif
- __asm__ __volatile__(
- spin_lock_string
- :"=m" (lock->lock) : : "memory");
-}
-
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-typedef struct {
- volatile unsigned int lock;
-#if SPINLOCK_DEBUG
- unsigned magic;
-#endif
-} rwlock_t;
-
-#define RWLOCK_MAGIC 0xdeaf1eed
-
-#if SPINLOCK_DEBUG
-#define RWLOCK_MAGIC_INIT , RWLOCK_MAGIC
-#else
-#define RWLOCK_MAGIC_INIT /* */
-#endif
-
-#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
-
-#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
-
-/*
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- *
- * The inline assembly is non-obvious. Think about it.
- *
- * Changed to use the same technique as rw semaphores. See
- * semaphore.h for details. -ben
- */
-/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
-
-static inline void read_lock(rwlock_t *rw)
-{
-#if SPINLOCK_DEBUG
- if (rw->magic != RWLOCK_MAGIC)
- BUG();
-#endif
- __build_read_lock(rw, "__read_lock_failed");
-}
-
-static inline void write_lock(rwlock_t *rw)
-{
-#if SPINLOCK_DEBUG
- if (rw->magic != RWLOCK_MAGIC)
- BUG();
-#endif
- __build_write_lock(rw, "__write_lock_failed");
-}
-
-#define read_unlock(rw) asm volatile("lock ; incl %0" :"=m" ((rw)->lock) : : "memory")
-#define write_unlock(rw) asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ",%0":"=m" ((rw)->lock) : : "memory")
-
-static inline int write_trylock(rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
- if (atomic_sub_and_test(RW_LOCK_BIAS, count))
- return 1;
- atomic_add(RW_LOCK_BIAS, count);
- return 0;
-}
-
-#endif /* __ASM_SPINLOCK_H */
+++ /dev/null
-#ifndef _I386_STAT_H
-#define _I386_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned short st_dev;
- unsigned char __pad0[10];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned short st_rdev;
- unsigned char __pad3[10];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* future possible st_blocks high bits */
-
- unsigned long st_atime;
- unsigned long __pad5;
-
- unsigned long st_mtime;
- unsigned long __pad6;
-
- unsigned long st_ctime;
- unsigned long __pad7; /* will be high 32 bits of ctime someday */
-
- unsigned long long st_ino;
-};
-
-#endif
+++ /dev/null
-#ifndef _I386_STATFS_H
-#define _I386_STATFS_H
-
-#ifndef __KERNEL_STRICT_NAMES
-
-#include <linux/types.h>
-
-typedef __kernel_fsid_t fsid_t;
-
-#endif
-
-struct statfs {
- long f_type;
- long f_bsize;
- long f_blocks;
- long f_bfree;
- long f_bavail;
- long f_files;
- long f_ffree;
- __kernel_fsid_t f_fsid;
- long f_namelen;
- long f_spare[6];
-};
-
-#endif
+++ /dev/null
-#ifndef _I386_STRING_I486_H_
-#define _I386_STRING_I486_H_
-
-/*
- * This string-include defines all string functions as inline
- * functions. Use gcc. It also assumes ds=es=data space, this should be
- * normal. Most of the string-functions are rather heavily hand-optimized,
- * see especially strtok,strstr,str[c]spn. They should work, but are not
- * very easy to understand. Everything is done entirely within the register
- * set, making the functions fast and clean.
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Revised and optimized for i486/pentium
- * 1994/03/15 by Alberto Vignani/Davide Parodi @crf.it
- *
- * Split into 2 CPU specific files by Alan Cox to keep #ifdef noise down.
- *
- * 1999/10/5 Proper register args for newer GCCs and minor bugs
- * fixed - Petko Manolov (petkan@spct.net)
- * 1999/10/14 3DNow memscpy() added - Petkan
- * 2000/05/09 extern changed to static in function definitions
- * and a few cleanups - Petkan
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
-register char *tmp= (char *)dest;
-register char dummy;
-__asm__ __volatile__(
- "\n1:\t"
- "movb (%0),%2\n\t"
- "incl %0\n\t"
- "movb %2,(%1)\n\t"
- "incl %1\n\t"
- "testb %2,%2\n\t"
- "jne 1b"
- :"=r" (src), "=r" (tmp), "=q" (dummy)
- :"0" (src), "1" (tmp)
- :"memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char * dest,const char *src,size_t count)
-{
-register char *tmp= (char *)dest;
-register char dummy;
-if (count) {
-__asm__ __volatile__(
- "\n1:\t"
- "movb (%0),%2\n\t"
- "incl %0\n\t"
- "movb %2,(%1)\n\t"
- "incl %1\n\t"
- "decl %3\n\t"
- "je 3f\n\t"
- "testb %2,%2\n\t"
- "jne 1b\n\t"
- "2:\tmovb %2,(%1)\n\t"
- "incl %1\n\t"
- "decl %3\n\t"
- "jne 2b\n\t"
- "3:"
- :"=r" (src), "=r" (tmp), "=q" (dummy), "=r" (count)
- :"0" (src), "1" (tmp), "3" (count)
- :"memory");
- } /* if (count) */
-return dest;
-}
-
-#define __HAVE_ARCH_STRCAT
-static inline char * strcat(char * dest,const char * src)
-{
-register char *tmp = (char *)(dest-1);
-register char dummy;
-__asm__ __volatile__(
- "\n1:\tincl %1\n\t"
- "cmpb $0,(%1)\n\t"
- "jne 1b\n"
- "2:\tmovb (%2),%b0\n\t"
- "incl %2\n\t"
- "movb %b0,(%1)\n\t"
- "incl %1\n\t"
- "testb %b0,%b0\n\t"
- "jne 2b\n"
- :"=q" (dummy), "=r" (tmp), "=r" (src)
- :"1" (tmp), "2" (src)
- :"memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRNCAT
-static inline char * strncat(char * dest,const char * src,size_t count)
-{
-register char *tmp = (char *)(dest-1);
-register char dummy;
-__asm__ __volatile__(
- "\n1:\tincl %1\n\t"
- "cmpb $0,(%1)\n\t"
- "jne 1b\n"
- "2:\tdecl %3\n\t"
- "js 3f\n\t"
- "movb (%2),%b0\n\t"
- "incl %2\n\t"
- "movb %b0,(%1)\n\t"
- "incl %1\n\t"
- "testb %b0,%b0\n\t"
- "jne 2b\n"
- "3:\txorb %0,%0\n\t"
- "movb %b0,(%1)\n\t"
- :"=q" (dummy), "=r" (tmp), "=r" (src), "=r" (count)
- :"1" (tmp), "2" (src), "3" (count)
- :"memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
-register int __res;
-__asm__ __volatile__(
- "\n1:\tmovb (%1),%b0\n\t"
- "incl %1\n\t"
- "cmpb %b0,(%2)\n\t"
- "jne 2f\n\t"
- "incl %2\n\t"
- "testb %b0,%b0\n\t"
- "jne 1b\n\t"
- "xorl %0,%0\n\t"
- "jmp 3f\n"
- "2:\tmovl $1,%0\n\t"
- "jb 3f\n\t"
- "negl %0\n"
- "3:"
- :"=q" (__res), "=r" (cs), "=r" (ct)
- :"1" (cs), "2" (ct)
- : "memory" );
-return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
-register int __res;
-__asm__ __volatile__(
- "\n1:\tdecl %3\n\t"
- "js 2f\n\t"
- "movb (%1),%b0\n\t"
- "incl %1\n\t"
- "cmpb %b0,(%2)\n\t"
- "jne 3f\n\t"
- "incl %2\n\t"
- "testb %b0,%b0\n\t"
- "jne 1b\n"
- "2:\txorl %0,%0\n\t"
- "jmp 4f\n"
- "3:\tmovl $1,%0\n\t"
- "jb 4f\n\t"
- "negl %0\n"
- "4:"
- :"=q" (__res), "=r" (cs), "=r" (ct), "=r" (count)
- :"1" (cs), "2" (ct), "3" (count));
-return __res;
-}
-
-#define __HAVE_ARCH_STRCHR
-static inline char * strchr(const char * s, int c)
-{
-register char * __res;
-__asm__ __volatile__(
- "movb %%al,%%ah\n"
- "1:\tmovb (%1),%%al\n\t"
- "cmpb %%ah,%%al\n\t"
- "je 2f\n\t"
- "incl %1\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n\t"
- "xorl %1,%1\n"
- "2:\tmovl %1,%0\n\t"
- :"=a" (__res), "=r" (s)
- :"0" (c), "1" (s));
-return __res;
-}
-
-#define __HAVE_ARCH_STRRCHR
-static inline char * strrchr(const char * s, int c)
-{
-int d0, d1;
-register char * __res;
-__asm__ __volatile__(
- "movb %%al,%%ah\n"
- "1:\tlodsb\n\t"
- "cmpb %%ah,%%al\n\t"
- "jne 2f\n\t"
- "leal -1(%%esi),%0\n"
- "2:\ttestb %%al,%%al\n\t"
- "jne 1b"
- :"=d" (__res), "=&S" (d0), "=&a" (d1)
- :"0" (0), "1" (s), "2" (c));
-return __res;
-}
-
-
-#define __HAVE_ARCH_STRCSPN
-static inline size_t strcspn(const char * cs, const char * ct)
-{
-int d0, d1;
-register char * __res;
-__asm__ __volatile__(
- "movl %6,%%edi\n\t"
- "repne\n\t"
- "scasb\n\t"
- "notl %%ecx\n\t"
- "decl %%ecx\n\t"
- "movl %%ecx,%%edx\n"
- "1:\tlodsb\n\t"
- "testb %%al,%%al\n\t"
- "je 2f\n\t"
- "movl %6,%%edi\n\t"
- "movl %%edx,%%ecx\n\t"
- "repne\n\t"
- "scasb\n\t"
- "jne 1b\n"
- "2:\tdecl %0"
- :"=S" (__res), "=&a" (d0), "=&c" (d1)
- :"0" (cs), "1" (0), "2" (0xffffffff), "g" (ct)
- :"dx", "di");
-return __res-cs;
-}
-
-
-#define __HAVE_ARCH_STRLEN
-static inline size_t strlen(const char * s)
-{
-/*
- * slightly slower on a 486, but with better chances of
- * register allocation
- */
-register char dummy, *tmp= (char *)s;
-__asm__ __volatile__(
- "\n1:\t"
- "movb\t(%0),%1\n\t"
- "incl\t%0\n\t"
- "testb\t%1,%1\n\t"
- "jne\t1b"
- :"=r" (tmp),"=q" (dummy)
- :"0" (s)
- : "memory" );
-return (tmp-s-1);
-}
-
-/* Added by Gertjan van Wingerde to make minix and sysv module work */
-#define __HAVE_ARCH_STRNLEN
-static inline size_t strnlen(const char * s, size_t count)
-{
-int d0;
-register int __res;
-__asm__ __volatile__(
- "movl %3,%0\n\t"
- "jmp 2f\n"
- "1:\tcmpb $0,(%0)\n\t"
- "je 3f\n\t"
- "incl %0\n"
- "2:\tdecl %2\n\t"
- "cmpl $-1,%2\n\t"
- "jne 1b\n"
- "3:\tsubl %3,%0"
- :"=a" (__res), "=&d" (d0)
- :"1" (count), "c" (s));
-return __res;
-}
-/* end of additional stuff */
-
-
-/*
- * These ought to get tweaked to do some cache priming.
- */
-
-static inline void * __memcpy_by4(void * to, const void * from, size_t n)
-{
-register void *tmp = (void *)to;
-register int dummy1,dummy2;
-__asm__ __volatile__ (
- "\n1:\tmovl (%2),%0\n\t"
- "addl $4,%2\n\t"
- "movl %0,(%1)\n\t"
- "addl $4,%1\n\t"
- "decl %3\n\t"
- "jnz 1b"
- :"=r" (dummy1), "=r" (tmp), "=r" (from), "=r" (dummy2)
- :"1" (tmp), "2" (from), "3" (n/4)
- :"memory");
-return (to);
-}
-
-static inline void * __memcpy_by2(void * to, const void * from, size_t n)
-{
-register void *tmp = (void *)to;
-register int dummy1,dummy2;
-__asm__ __volatile__ (
- "shrl $1,%3\n\t"
- "jz 2f\n" /* only a word */
- "1:\tmovl (%2),%0\n\t"
- "addl $4,%2\n\t"
- "movl %0,(%1)\n\t"
- "addl $4,%1\n\t"
- "decl %3\n\t"
- "jnz 1b\n"
- "2:\tmovw (%2),%w0\n\t"
- "movw %w0,(%1)"
- :"=r" (dummy1), "=r" (tmp), "=r" (from), "=r" (dummy2)
- :"1" (tmp), "2" (from), "3" (n/2)
- :"memory");
-return (to);
-}
-
-static inline void * __memcpy_g(void * to, const void * from, size_t n)
-{
-int d0, d1, d2;
-register void *tmp = (void *)to;
-__asm__ __volatile__ (
- "shrl $1,%%ecx\n\t"
- "jnc 1f\n\t"
- "movsb\n"
- "1:\tshrl $1,%%ecx\n\t"
- "jnc 2f\n\t"
- "movsw\n"
- "2:\trep\n\t"
- "movsl"
- :"=&c" (d0), "=&D" (d1), "=&S" (d2)
- :"0" (n), "1" ((long) tmp), "2" ((long) from)
- :"memory");
-return (to);
-}
-
-#define __memcpy_c(d,s,count) \
-((count%4==0) ? \
- __memcpy_by4((d),(s),(count)) : \
- ((count%2==0) ? \
- __memcpy_by2((d),(s),(count)) : \
- __memcpy_g((d),(s),(count))))
-
-#define __memcpy(d,s,count) \
-(__builtin_constant_p(count) ? \
- __memcpy_c((d),(s),(count)) : \
- __memcpy_g((d),(s),(count)))
-
-#define __HAVE_ARCH_MEMCPY
-
-#include <linux/config.h>
-
-#ifdef CONFIG_X86_USE_3DNOW
-
-#include <asm/mmx.h>
-
-/*
-** This CPU favours 3DNow strongly (eg AMD K6-II, K6-III, Athlon)
-*/
-
-static inline void * __constant_memcpy3d(void * to, const void * from, size_t len)
-{
- if (len < 512)
- return __memcpy_c(to, from, len);
- return _mmx_memcpy(to, from, len);
-}
-
-static inline void *__memcpy3d(void *to, const void *from, size_t len)
-{
- if(len < 512)
- return __memcpy_g(to, from, len);
- return _mmx_memcpy(to, from, len);
-}
-
-#define memcpy(d, s, count) \
-(__builtin_constant_p(count) ? \
- __constant_memcpy3d((d),(s),(count)) : \
- __memcpy3d((d),(s),(count)))
-
-#else /* CONFIG_X86_USE_3DNOW */
-
-/*
-** Generic routines
-*/
-
-
-#define memcpy(d, s, count) __memcpy(d, s, count)
-
-#endif /* CONFIG_X86_USE_3DNOW */
-
-
-extern void __struct_cpy_bug( void );
-
-#define struct_cpy(x,y) \
-({ \
- if (sizeof(*(x)) != sizeof(*(y))) \
- __struct_cpy_bug; \
- memcpy(x, y, sizeof(*(x))); \
-})
-
-
-#define __HAVE_ARCH_MEMMOVE
-static inline void * memmove(void * dest,const void * src, size_t n)
-{
-int d0, d1, d2;
-register void *tmp = (void *)dest;
-if (dest<src)
-__asm__ __volatile__ (
- "rep\n\t"
- "movsb"
- :"=&c" (d0), "=&S" (d1), "=&D" (d2)
- :"0" (n), "1" (src), "2" (tmp)
- :"memory");
-else
-__asm__ __volatile__ (
- "std\n\t"
- "rep\n\t"
- "movsb\n\t"
- "cld"
- :"=&c" (d0), "=&S" (d1), "=&D" (d2)
- :"0" (n), "1" (n-1+(const char *)src), "2" (n-1+(char *)tmp)
- :"memory");
-return dest;
-}
-
-
-#define __HAVE_ARCH_MEMCMP
-static inline int memcmp(const void * cs,const void * ct,size_t count)
-{
-int d0, d1, d2;
-register int __res;
-__asm__ __volatile__(
- "repe\n\t"
- "cmpsb\n\t"
- "je 1f\n\t"
- "sbbl %0,%0\n\t"
- "orb $1,%b0\n"
- "1:"
- :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
- :"0" (0), "1" (cs), "2" (ct), "3" (count));
-return __res;
-}
-
-
-#define __HAVE_ARCH_MEMCHR
-static inline void * memchr(const void * cs,int c,size_t count)
-{
-int d0;
-register void * __res;
-if (!count)
- return NULL;
-__asm__ __volatile__(
- "repne\n\t"
- "scasb\n\t"
- "je 1f\n\t"
- "movl $1,%0\n"
- "1:\tdecl %0"
- :"=D" (__res), "=&c" (d0)
- :"a" (c), "0" (cs), "1" (count));
-return __res;
-}
-
-#define __memset_cc(s,c,count) \
-((count%4==0) ? \
- __memset_cc_by4((s),(c),(count)) : \
- ((count%2==0) ? \
- __memset_cc_by2((s),(c),(count)) : \
- __memset_cg((s),(c),(count))))
-
-#define __memset_gc(s,c,count) \
-((count%4==0) ? \
- __memset_gc_by4((s),(c),(count)) : \
- ((count%2==0) ? \
- __memset_gc_by2((s),(c),(count)) : \
- __memset_gg((s),(c),(count))))
-
-#define __HAVE_ARCH_MEMSET
-#define memset(s,c,count) \
-(__builtin_constant_p(c) ? \
- (__builtin_constant_p(count) ? \
- __memset_cc((s),(c),(count)) : \
- __memset_cg((s),(c),(count))) : \
- (__builtin_constant_p(count) ? \
- __memset_gc((s),(c),(count)) : \
- __memset_gg((s),(c),(count))))
-
-static inline void * __memset_cc_by4(void * s, char c, size_t count)
-{
-/*
- * register char *tmp = s;
- */
-register char *tmp = (char *)s;
-register int dummy;
-__asm__ __volatile__ (
- "\n1:\tmovl %2,(%0)\n\t"
- "addl $4,%0\n\t"
- "decl %1\n\t"
- "jnz 1b"
- :"=r" (tmp), "=r" (dummy)
- :"q" (0x01010101UL * (unsigned char) c), "0" (tmp), "1" (count/4)
- :"memory");
-return s;
-}
-
-static inline void * __memset_cc_by2(void * s, char c, size_t count)
-{
-register void *tmp = (void *)s;
-register int dummy;
-__asm__ __volatile__ (
- "shrl $1,%1\n\t" /* may be divisible also by 4 */
- "jz 2f\n"
- "\n1:\tmovl %2,(%0)\n\t"
- "addl $4,%0\n\t"
- "decl %1\n\t"
- "jnz 1b\n"
- "2:\tmovw %w2,(%0)"
- :"=r" (tmp), "=r" (dummy)
- :"q" (0x01010101UL * (unsigned char) c), "0" (tmp), "1" (count/2)
- :"memory");
-return s;
-}
-
-static inline void * __memset_gc_by4(void * s, char c, size_t count)
-{
-register void *tmp = (void *)s;
-register int dummy;
-__asm__ __volatile__ (
- "movb %b0,%h0\n"
- "pushw %w0\n\t"
- "shll $16,%0\n\t"
- "popw %w0\n"
- "1:\tmovl %0,(%1)\n\t"
- "addl $4,%1\n\t"
- "decl %2\n\t"
- "jnz 1b\n"
- :"=q" (c), "=r" (tmp), "=r" (dummy)
- :"0" ((unsigned) c), "1" (tmp), "2" (count/4)
- :"memory");
-return s;
-}
-
-static inline void * __memset_gc_by2(void * s, char c, size_t count)
-{
-register void *tmp = (void *)s;
-register int dummy1,dummy2;
-__asm__ __volatile__ (
- "movb %b0,%h0\n\t"
- "shrl $1,%2\n\t" /* may be divisible also by 4 */
- "jz 2f\n\t"
- "pushw %w0\n\t"
- "shll $16,%0\n\t"
- "popw %w0\n"
- "1:\tmovl %0,(%1)\n\t"
- "addl $4,%1\n\t"
- "decl %2\n\t"
- "jnz 1b\n"
- "2:\tmovw %w0,(%1)"
- :"=q" (dummy1), "=r" (tmp), "=r" (dummy2)
- :"0" ((unsigned) c), "1" (tmp), "2" (count/2)
- :"memory");
-return s;
-}
-
-static inline void * __memset_cg(void * s, char c, size_t count)
-{
-int d0, d1;
-register void *tmp = (void *)s;
-__asm__ __volatile__ (
- "shrl $1,%%ecx\n\t"
- "rep\n\t"
- "stosw\n\t"
- "jnc 1f\n\t"
- "movb %%al,(%%edi)\n"
- "1:"
- :"=&c" (d0), "=&D" (d1)
- :"a" (0x0101U * (unsigned char) c), "0" (count), "1" (tmp)
- :"memory");
-return s;
-}
-
-static inline void * __memset_gg(void * s,char c,size_t count)
-{
-int d0, d1, d2;
-register void *tmp = (void *)s;
-__asm__ __volatile__ (
- "movb %%al,%%ah\n\t"
- "shrl $1,%%ecx\n\t"
- "rep\n\t"
- "stosw\n\t"
- "jnc 1f\n\t"
- "movb %%al,(%%edi)\n"
- "1:"
- :"=&c" (d0), "=&D" (d1), "=&D" (d2)
- :"0" (count), "1" (tmp), "2" (c)
- :"memory");
-return s;
-}
-
-
-/*
- * find the first occurrence of byte 'c', or 1 past the area if none
- */
-#define __HAVE_ARCH_MEMSCAN
-static inline void * memscan(void * addr, int c, size_t size)
-{
- if (!size)
- return addr;
- __asm__("repnz; scasb
- jnz 1f
- dec %%edi
-1: "
- : "=D" (addr), "=c" (size)
- : "0" (addr), "1" (size), "a" (c));
- return addr;
-}
-
-#endif
+++ /dev/null
-#ifndef _I386_STRING_H_
-#define _I386_STRING_H_
-
-#ifdef __KERNEL__
-#include <linux/config.h>
-/*
- * On a 486 or Pentium, we are better off not using the
- * byte string operations. But on a 386 or a PPro the
- * byte string ops are faster than doing it by hand
- * (MUCH faster on a Pentium).
- *
- * Also, the byte strings actually work correctly. Forget
- * the i486 routines for now as they may be broken..
- */
-#if FIXED_486_STRING && defined(CONFIG_X86_USE_STRING_486)
-#include <asm/string-486.h>
-#else
-
-/*
- * This string-include defines all string functions as inline
- * functions. Use gcc. It also assumes ds=es=data space, this should be
- * normal. Most of the string-functions are rather heavily hand-optimized,
- * see especially strtok,strstr,str[c]spn. They should work, but are not
- * very easy to understand. Everything is done entirely within the register
- * set, making the functions fast and clean. String instructions have been
- * used through-out, making for "slightly" unclear code :-)
- *
- * NO Copyright (C) 1991, 1992 Linus Torvalds,
- * consider these trivial functions to be PD.
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
-int d0, d1, d2;
-__asm__ __volatile__(
- "1:\tlodsb\n\t"
- "stosb\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b"
- : "=&S" (d0), "=&D" (d1), "=&a" (d2)
- :"0" (src),"1" (dest) : "memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char * dest,const char *src,size_t count)
-{
-int d0, d1, d2, d3;
-__asm__ __volatile__(
- "1:\tdecl %2\n\t"
- "js 2f\n\t"
- "lodsb\n\t"
- "stosb\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n\t"
- "rep\n\t"
- "stosb\n"
- "2:"
- : "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
- :"0" (src),"1" (dest),"2" (count) : "memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRCAT
-static inline char * strcat(char * dest,const char * src)
-{
-int d0, d1, d2, d3;
-__asm__ __volatile__(
- "repne\n\t"
- "scasb\n\t"
- "decl %1\n"
- "1:\tlodsb\n\t"
- "stosb\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b"
- : "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
- : "0" (src), "1" (dest), "2" (0), "3" (0xffffffff):"memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRNCAT
-static inline char * strncat(char * dest,const char * src,size_t count)
-{
-int d0, d1, d2, d3;
-__asm__ __volatile__(
- "repne\n\t"
- "scasb\n\t"
- "decl %1\n\t"
- "movl %8,%3\n"
- "1:\tdecl %3\n\t"
- "js 2f\n\t"
- "lodsb\n\t"
- "stosb\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n"
- "2:\txorl %2,%2\n\t"
- "stosb"
- : "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
- : "0" (src),"1" (dest),"2" (0),"3" (0xffffffff), "g" (count)
- : "memory");
-return dest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
-int d0, d1;
-register int __res;
-__asm__ __volatile__(
- "1:\tlodsb\n\t"
- "scasb\n\t"
- "jne 2f\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n\t"
- "xorl %%eax,%%eax\n\t"
- "jmp 3f\n"
- "2:\tsbbl %%eax,%%eax\n\t"
- "orb $1,%%al\n"
- "3:"
- :"=a" (__res), "=&S" (d0), "=&D" (d1)
- :"1" (cs),"2" (ct));
-return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
-register int __res;
-int d0, d1, d2;
-__asm__ __volatile__(
- "1:\tdecl %3\n\t"
- "js 2f\n\t"
- "lodsb\n\t"
- "scasb\n\t"
- "jne 3f\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n"
- "2:\txorl %%eax,%%eax\n\t"
- "jmp 4f\n"
- "3:\tsbbl %%eax,%%eax\n\t"
- "orb $1,%%al\n"
- "4:"
- :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
- :"1" (cs),"2" (ct),"3" (count));
-return __res;
-}
-
-#define __HAVE_ARCH_STRCHR
-static inline char * strchr(const char * s, int c)
-{
-int d0;
-register char * __res;
-__asm__ __volatile__(
- "movb %%al,%%ah\n"
- "1:\tlodsb\n\t"
- "cmpb %%ah,%%al\n\t"
- "je 2f\n\t"
- "testb %%al,%%al\n\t"
- "jne 1b\n\t"
- "movl $1,%1\n"
- "2:\tmovl %1,%0\n\t"
- "decl %0"
- :"=a" (__res), "=&S" (d0) : "1" (s),"0" (c));
-return __res;
-}
-
-#define __HAVE_ARCH_STRRCHR
-static inline char * strrchr(const char * s, int c)
-{
-int d0, d1;
-register char * __res;
-__asm__ __volatile__(
- "movb %%al,%%ah\n"
- "1:\tlodsb\n\t"
- "cmpb %%ah,%%al\n\t"
- "jne 2f\n\t"
- "leal -1(%%esi),%0\n"
- "2:\ttestb %%al,%%al\n\t"
- "jne 1b"
- :"=g" (__res), "=&S" (d0), "=&a" (d1) :"0" (0),"1" (s),"2" (c));
-return __res;
-}
-
-#define __HAVE_ARCH_STRLEN
-static inline size_t strlen(const char * s)
-{
-int d0;
-register int __res;
-__asm__ __volatile__(
- "repne\n\t"
- "scasb\n\t"
- "notl %0\n\t"
- "decl %0"
- :"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffff));
-return __res;
-}
-
-static inline void * __memcpy(void * to, const void * from, size_t n)
-{
-int d0, d1, d2;
-__asm__ __volatile__(
- "rep ; movsl\n\t"
- "testb $2,%b4\n\t"
- "je 1f\n\t"
- "movsw\n"
- "1:\ttestb $1,%b4\n\t"
- "je 2f\n\t"
- "movsb\n"
- "2:"
- : "=&c" (d0), "=&D" (d1), "=&S" (d2)
- :"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from)
- : "memory");
-return (to);
-}
-
-/*
- * This looks horribly ugly, but the compiler can optimize it totally,
- * as the count is constant.
- */
-static inline void * __constant_memcpy(void * to, const void * from, size_t n)
-{
- switch (n) {
- case 0:
- return to;
- case 1:
- *(unsigned char *)to = *(const unsigned char *)from;
- return to;
- case 2:
- *(unsigned short *)to = *(const unsigned short *)from;
- return to;
- case 3:
- *(unsigned short *)to = *(const unsigned short *)from;
- *(2+(unsigned char *)to) = *(2+(const unsigned char *)from);
- return to;
- case 4:
- *(unsigned long *)to = *(const unsigned long *)from;
- return to;
- case 6: /* for Ethernet addresses */
- *(unsigned long *)to = *(const unsigned long *)from;
- *(2+(unsigned short *)to) = *(2+(const unsigned short *)from);
- return to;
- case 8:
- *(unsigned long *)to = *(const unsigned long *)from;
- *(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
- return to;
- case 12:
- *(unsigned long *)to = *(const unsigned long *)from;
- *(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
- *(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
- return to;
- case 16:
- *(unsigned long *)to = *(const unsigned long *)from;
- *(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
- *(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
- *(3+(unsigned long *)to) = *(3+(const unsigned long *)from);
- return to;
- case 20:
- *(unsigned long *)to = *(const unsigned long *)from;
- *(1+(unsigned long *)to) = *(1+(const unsigned long *)from);
- *(2+(unsigned long *)to) = *(2+(const unsigned long *)from);
- *(3+(unsigned long *)to) = *(3+(const unsigned long *)from);
- *(4+(unsigned long *)to) = *(4+(const unsigned long *)from);
- return to;
- }
-#define COMMON(x) \
-__asm__ __volatile__( \
- "rep ; movsl" \
- x \
- : "=&c" (d0), "=&D" (d1), "=&S" (d2) \
- : "0" (n/4),"1" ((long) to),"2" ((long) from) \
- : "memory");
-{
- int d0, d1, d2;
- switch (n % 4) {
- case 0: COMMON(""); return to;
- case 1: COMMON("\n\tmovsb"); return to;
- case 2: COMMON("\n\tmovsw"); return to;
- default: COMMON("\n\tmovsw\n\tmovsb"); return to;
- }
-}
-
-#undef COMMON
-}
-
-#define __HAVE_ARCH_MEMCPY
-
-#ifdef CONFIG_X86_USE_3DNOW
-
-#include <asm/mmx.h>
-
-/*
- * This CPU favours 3DNow strongly (eg AMD Athlon)
- */
-
-static inline void * __constant_memcpy3d(void * to, const void * from, size_t len)
-{
- if (len < 512)
- return __constant_memcpy(to, from, len);
- return _mmx_memcpy(to, from, len);
-}
-
-static __inline__ void *__memcpy3d(void *to, const void *from, size_t len)
-{
- if (len < 512)
- return __memcpy(to, from, len);
- return _mmx_memcpy(to, from, len);
-}
-
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy3d((t),(f),(n)) : \
- __memcpy3d((t),(f),(n)))
-
-#else
-
-/*
- * No 3D Now!
- */
-
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy((t),(f),(n)) : \
- __memcpy((t),(f),(n)))
-
-#endif
-
-/*
- * struct_cpy(x,y), copy structure *x into (matching structure) *y.
- *
- * We get link-time errors if the structure sizes do not match.
- * There is no runtime overhead, it's all optimized away at
- * compile time.
- */
-extern void __struct_cpy_bug (void);
-
-#define struct_cpy(x,y) \
-({ \
- if (sizeof(*(x)) != sizeof(*(y))) \
- __struct_cpy_bug; \
- memcpy(x, y, sizeof(*(x))); \
-})
-
-#define __HAVE_ARCH_MEMMOVE
-static inline void * memmove(void * dest,const void * src, size_t n)
-{
-int d0, d1, d2;
-if (dest<src)
-__asm__ __volatile__(
- "rep\n\t"
- "movsb"
- : "=&c" (d0), "=&S" (d1), "=&D" (d2)
- :"0" (n),"1" (src),"2" (dest)
- : "memory");
-else
-__asm__ __volatile__(
- "std\n\t"
- "rep\n\t"
- "movsb\n\t"
- "cld"
- : "=&c" (d0), "=&S" (d1), "=&D" (d2)
- :"0" (n),
- "1" (n-1+(const char *)src),
- "2" (n-1+(char *)dest)
- :"memory");
-return dest;
-}
-
-#define memcmp __builtin_memcmp
-
-#define __HAVE_ARCH_MEMCHR
-static inline void * memchr(const void * cs,int c,size_t count)
-{
-int d0;
-register void * __res;
-if (!count)
- return NULL;
-__asm__ __volatile__(
- "repne\n\t"
- "scasb\n\t"
- "je 1f\n\t"
- "movl $1,%0\n"
- "1:\tdecl %0"
- :"=D" (__res), "=&c" (d0) : "a" (c),"0" (cs),"1" (count));
-return __res;
-}
-
-static inline void * __memset_generic(void * s, char c,size_t count)
-{
-int d0, d1;
-__asm__ __volatile__(
- "rep\n\t"
- "stosb"
- : "=&c" (d0), "=&D" (d1)
- :"a" (c),"1" (s),"0" (count)
- :"memory");
-return s;
-}
-
-/* we might want to write optimized versions of these later */
-#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count))
-
-/*
- * memset(x,0,y) is a reasonably common thing to do, so we want to fill
- * things 32 bits at a time even when we don't know the size of the
- * area at compile-time..
- */
-static inline void * __constant_c_memset(void * s, unsigned long c, size_t count)
-{
-int d0, d1;
-__asm__ __volatile__(
- "rep ; stosl\n\t"
- "testb $2,%b3\n\t"
- "je 1f\n\t"
- "stosw\n"
- "1:\ttestb $1,%b3\n\t"
- "je 2f\n\t"
- "stosb\n"
- "2:"
- : "=&c" (d0), "=&D" (d1)
- :"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
- :"memory");
-return (s);
-}
-
-/* Added by Gertjan van Wingerde to make minix and sysv module work */
-#define __HAVE_ARCH_STRNLEN
-static inline size_t strnlen(const char * s, size_t count)
-{
-int d0;
-register int __res;
-__asm__ __volatile__(
- "movl %2,%0\n\t"
- "jmp 2f\n"
- "1:\tcmpb $0,(%0)\n\t"
- "je 3f\n\t"
- "incl %0\n"
- "2:\tdecl %1\n\t"
- "cmpl $-1,%1\n\t"
- "jne 1b\n"
- "3:\tsubl %2,%0"
- :"=a" (__res), "=&d" (d0)
- :"c" (s),"1" (count));
-return __res;
-}
-/* end of additional stuff */
-
-#define __HAVE_ARCH_STRSTR
-
-extern char *strstr(const char *cs, const char *ct);
-
-/*
- * This looks horribly ugly, but the compiler can optimize it totally,
- * as we by now know that both pattern and count is constant..
- */
-static inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count)
-{
- switch (count) {
- case 0:
- return s;
- case 1:
- *(unsigned char *)s = pattern;
- return s;
- case 2:
- *(unsigned short *)s = pattern;
- return s;
- case 3:
- *(unsigned short *)s = pattern;
- *(2+(unsigned char *)s) = pattern;
- return s;
- case 4:
- *(unsigned long *)s = pattern;
- return s;
- }
-#define COMMON(x) \
-__asm__ __volatile__( \
- "rep ; stosl" \
- x \
- : "=&c" (d0), "=&D" (d1) \
- : "a" (pattern),"0" (count/4),"1" ((long) s) \
- : "memory")
-{
- int d0, d1;
- switch (count % 4) {
- case 0: COMMON(""); return s;
- case 1: COMMON("\n\tstosb"); return s;
- case 2: COMMON("\n\tstosw"); return s;
- default: COMMON("\n\tstosw\n\tstosb"); return s;
- }
-}
-
-#undef COMMON
-}
-
-#define __constant_c_x_memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_c_and_count_memset((s),(c),(count)) : \
- __constant_c_memset((s),(c),(count)))
-
-#define __memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_count_memset((s),(c),(count)) : \
- __memset_generic((s),(c),(count)))
-
-#define __HAVE_ARCH_MEMSET
-#define memset(s, c, count) \
-(__builtin_constant_p(c) ? \
- __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \
- __memset((s),(c),(count)))
-
-/*
- * find the first occurrence of byte 'c', or 1 past the area if none
- */
-#define __HAVE_ARCH_MEMSCAN
-static inline void * memscan(void * addr, int c, size_t size)
-{
- if (!size)
- return addr;
- __asm__("repnz; scasb\n\t"
- "jnz 1f\n\t"
- "dec %%edi\n"
- "1:"
- : "=D" (addr), "=c" (size)
- : "0" (addr), "1" (size), "a" (c));
- return addr;
-}
-
-#endif /* CONFIG_X86_USE_STRING_486 */
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-#ifndef __ARCH_I386_TERMBITS_H__
-#define __ARCH_I386_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif
+++ /dev/null
-#ifndef _I386_TERMIOS_H
-#define _I386_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* line disciplines */
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14 /* synchronous PPP */
-#define N_HCI 15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _I386_TERMIOS_H */
+++ /dev/null
-/*
- * linux/include/asm-i386/timex.h
- *
- * i386 architecture timex specifications
- */
-#ifndef _ASMi386_TIMEX_H
-#define _ASMi386_TIMEX_H
-
-#include <linux/config.h>
-#include <asm/msr.h>
-
-#ifdef CONFIG_MELAN
-# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#else
-# define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-#endif
-
-#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
-#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
- (1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR)) \
- << (SHIFT_SCALE-SHIFT_HZ)) / HZ)
-
-/*
- * Standard way to access the cycle counter on i586+ CPUs.
- * Currently only used on SMP.
- *
- * If you really have a SMP machine with i486 chips or older,
- * compile for that, and this will just always return zero.
- * That's ok, it just means that the nicer scheduling heuristics
- * won't work for you.
- *
- * We only use the low 32 bits, and we'd simply better make sure
- * that we reschedule before that wraps. Scheduling at least every
- * four billion cycles just basically sounds like a good idea,
- * regardless of how fast the machine is.
- */
-typedef unsigned long long cycles_t;
-
-extern cycles_t cacheflush_time;
-
-static inline cycles_t get_cycles (void)
-{
-#ifndef CONFIG_X86_TSC
- return 0;
-#else
- unsigned long long ret;
-
- rdtscll(ret);
- return ret;
-#endif
-}
-
-extern unsigned long cpu_khz;
-
-#define vxtime_lock() do {} while (0)
-#define vxtime_unlock() do {} while (0)
-
-#endif
+++ /dev/null
-#include <asm-generic/tlb.h>
+++ /dev/null
-#ifndef _I386_TYPES_H
-#define _I386_TYPES_H
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#include <linux/config.h>
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* DMA addresses come in generic and 64-bit flavours. */
-
-#ifdef CONFIG_HIGHMEM64G
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif
-typedef u64 dma64_addr_t;
-
-#endif /* __KERNEL__ */
-
-#endif
+++ /dev/null
-#ifndef __i386_UACCESS_H
-#define __i386_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/config.h>
-#include <linux/sched.h>
-#include <linux/prefetch.h>
-#include <asm/page.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current->addr_limit)
-#define set_fs(x) (current->addr_limit = (x))
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-extern int __verify_write(const void *, unsigned long);
-
-#define __addr_ok(addr) ((unsigned long)(addr) < (current->addr_limit.seg))
-
-/*
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- */
-#define __range_ok(addr,size) ({ \
- unsigned long flag,sum; \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (sum) \
- :"1" (addr),"g" ((int)(size)),"g" (current->addr_limit.seg)); \
- flag; })
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-
-#else
-
-#define access_ok(type,addr,size) ( (__range_ok(addr,size) == 0) && \
- ((type) == VERIFY_READ || boot_cpu_data.wp_works_ok || \
- segment_eq(get_fs(),KERNEL_DS) || \
- __verify_write((void *)(addr),(size))))
-
-#endif
-
-static inline int verify_area(int type, const void * addr, unsigned long size)
-{
- return access_ok(type,addr,size) ? 0 : -EFAULT;
-}
-
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the uglyness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#define __get_user_x(size,ret,x,ptr) \
- __asm__ __volatile__("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
-
-/* Careful: we have to cast the result to the type of the pointer for sign reasons */
-#define get_user(x,ptr) \
-({ int __ret_gu,__val_gu; \
- switch(sizeof (*(ptr))) { \
- case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
- case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \
- case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \
- default: __get_user_x(X,__ret_gu,__val_gu,ptr); break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-extern void __put_user_bad(void);
-
-#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __put_user_size((x),(ptr),(size),__pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) *__pu_addr = (ptr); \
- if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
- __put_user_size((x),__pu_addr,(size),__pu_err); \
- __pu_err; \
-})
-
-#define __put_user_u64(x, addr, err) \
- __asm__ __volatile__( \
- "1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,4b\n" \
- " .long 2b,4b\n" \
- ".previous" \
- : "=r"(err) \
- : "A" (x), "r" (addr), "i"(-EFAULT), "0"(err))
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,"b","b","iq"); break; \
- case 2: __put_user_asm(x,ptr,retval,"w","w","ir"); break; \
- case 4: __put_user_asm(x,ptr,retval,"l","","ir"); break; \
- case 8: __put_user_u64(x,ptr,retval); break; \
- default: __put_user_bad(); \
- } \
-} while (0)
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype) \
- __asm__ __volatile__( \
- "1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : "=r"(err) \
- : ltype (x), "m"(__m(addr)), "i"(-EFAULT), "0"(err))
-
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err, __gu_val; \
- __get_user_size(__gu_val,(ptr),(size),__gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,"b","b","=q"); break; \
- case 2: __get_user_asm(x,ptr,retval,"w","w","=r"); break; \
- case 4: __get_user_asm(x,ptr,retval,"l","","=r"); break; \
- default: (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype) \
- __asm__ __volatile__( \
- "1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : "=r"(err), ltype (x) \
- : "m"(__m(addr)), "i"(-EFAULT), "0"(err))
-
-
-/*
- * Copy To/From Userspace
- */
-
-/* Generic arbitrary sized copy. */
-#define __copy_user(to,from,size) \
-do { \
- int __d0, __d1; \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- " movl %3,%0\n" \
- "1: rep; movsb\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: lea 0(%3,%0,4),%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,2b\n" \
- ".previous" \
- : "=&c"(size), "=&D" (__d0), "=&S" (__d1) \
- : "r"(size & 3), "0"(size / 4), "1"(to), "2"(from) \
- : "memory"); \
-} while (0)
-
-#define __copy_user_zeroing(to,from,size) \
-do { \
- int __d0, __d1; \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- " movl %3,%0\n" \
- "1: rep; movsb\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: lea 0(%3,%0,4),%0\n" \
- "4: pushl %0\n" \
- " pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " rep; stosb\n" \
- " popl %%eax\n" \
- " popl %0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,4b\n" \
- ".previous" \
- : "=&c"(size), "=&D" (__d0), "=&S" (__d1) \
- : "r"(size & 3), "0"(size / 4), "1"(to), "2"(from) \
- : "memory"); \
-} while (0)
-
-/* We let the __ versions of copy_from/to_user inline, because they're often
- * used in fast paths and have only a small space overhead.
- */
-static inline unsigned long
-__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
-{
- __copy_user_zeroing(to,from,n);
- return n;
-}
-
-static inline unsigned long
-__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
-{
- __copy_user(to,from,n);
- return n;
-}
-
-
-/* Optimize just a little bit when we know the size of the move. */
-#define __constant_copy_user(to, from, size) \
-do { \
- int __d0, __d1; \
- switch (size & 3) { \
- default: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1:\n" \
- ".section .fixup,\"ax\"\n" \
- "2: shl $2,%0\n" \
- " jmp 1b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,2b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 1: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsb\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: shl $2,%0\n" \
- "4: incl %0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,4b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 2: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsw\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: shl $2,%0\n" \
- "4: addl $2,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,4b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 3: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsw\n" \
- "2: movsb\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: shl $2,%0\n" \
- "5: addl $2,%0\n" \
- "6: incl %0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,4b\n" \
- " .long 1b,5b\n" \
- " .long 2b,6b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- } \
-} while (0)
-
-/* Optimize just a little bit when we know the size of the move. */
-#define __constant_copy_user_zeroing(to, from, size) \
-do { \
- int __d0, __d1; \
- switch (size & 3) { \
- default: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1:\n" \
- ".section .fixup,\"ax\"\n" \
- "2: pushl %0\n" \
- " pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " rep; stosl\n" \
- " popl %%eax\n" \
- " popl %0\n" \
- " shl $2,%0\n" \
- " jmp 1b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,2b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 1: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsb\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: pushl %0\n" \
- " pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " rep; stosl\n" \
- " stosb\n" \
- " popl %%eax\n" \
- " popl %0\n" \
- " shl $2,%0\n" \
- " incl %0\n" \
- " jmp 2b\n" \
- "4: pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " stosb\n" \
- " popl %%eax\n" \
- " incl %0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,4b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 2: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsw\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: pushl %0\n" \
- " pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " rep; stosl\n" \
- " stosw\n" \
- " popl %%eax\n" \
- " popl %0\n" \
- " shl $2,%0\n" \
- " addl $2,%0\n" \
- " jmp 2b\n" \
- "4: pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " stosw\n" \
- " popl %%eax\n" \
- " addl $2,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,4b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- case 3: \
- __asm__ __volatile__( \
- "0: rep; movsl\n" \
- "1: movsw\n" \
- "2: movsb\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: pushl %0\n" \
- " pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " rep; stosl\n" \
- " stosw\n" \
- " stosb\n" \
- " popl %%eax\n" \
- " popl %0\n" \
- " shl $2,%0\n" \
- " addl $3,%0\n" \
- " jmp 2b\n" \
- "5: pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " stosw\n" \
- " stosb\n" \
- " popl %%eax\n" \
- " addl $3,%0\n" \
- " jmp 2b\n" \
- "6: pushl %%eax\n" \
- " xorl %%eax,%%eax\n" \
- " stosb\n" \
- " popl %%eax\n" \
- " incl %0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 0b,4b\n" \
- " .long 1b,5b\n" \
- " .long 2b,6b\n" \
- ".previous" \
- : "=c"(size), "=&S" (__d0), "=&D" (__d1)\
- : "1"(from), "2"(to), "0"(size/4) \
- : "memory"); \
- break; \
- } \
-} while (0)
-
-unsigned long __generic_copy_to_user(void *, const void *, unsigned long);
-unsigned long __generic_copy_from_user(void *, const void *, unsigned long);
-
-static inline unsigned long
-__constant_copy_to_user(void *to, const void *from, unsigned long n)
-{
- prefetch(from);
- if (access_ok(VERIFY_WRITE, to, n))
- __constant_copy_user(to,from,n);
- return n;
-}
-
-static inline unsigned long
-__constant_copy_from_user(void *to, const void *from, unsigned long n)
-{
- if (access_ok(VERIFY_READ, from, n))
- __constant_copy_user_zeroing(to,from,n);
- else
- memset(to, 0, n);
- return n;
-}
-
-static inline unsigned long
-__constant_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
-{
- __constant_copy_user(to,from,n);
- return n;
-}
-
-static inline unsigned long
-__constant_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
-{
- __constant_copy_user_zeroing(to,from,n);
- return n;
-}
-
-#define copy_to_user(to,from,n) \
- (__builtin_constant_p(n) ? \
- __constant_copy_to_user((to),(from),(n)) : \
- __generic_copy_to_user((to),(from),(n)))
-
-#define copy_from_user(to,from,n) \
- (__builtin_constant_p(n) ? \
- __constant_copy_from_user((to),(from),(n)) : \
- __generic_copy_from_user((to),(from),(n)))
-
-#define __copy_to_user(to,from,n) \
- (__builtin_constant_p(n) ? \
- __constant_copy_to_user_nocheck((to),(from),(n)) : \
- __generic_copy_to_user_nocheck((to),(from),(n)))
-
-#define __copy_from_user(to,from,n) \
- (__builtin_constant_p(n) ? \
- __constant_copy_from_user_nocheck((to),(from),(n)) : \
- __generic_copy_from_user_nocheck((to),(from),(n)))
-
-long strncpy_from_user(char *dst, const char *src, long count);
-long __strncpy_from_user(char *dst, const char *src, long count);
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-long strnlen_user(const char *str, long n);
-unsigned long clear_user(void *mem, unsigned long len);
-unsigned long __clear_user(void *mem, unsigned long len);
-
-#endif /* __i386_UACCESS_H */
+++ /dev/null
-#ifndef _ASMi386_UCONTEXT_H
-#define _ASMi386_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* !_ASMi386_UCONTEXT_H */
+++ /dev/null
-#ifndef __I386_UNALIGNED_H
-#define __I386_UNALIGNED_H
-
-/*
- * The i386 can do unaligned accesses itself.
- *
- * The strange macros are there to make sure these can't
- * be misused in a way that makes them not work on other
- * architectures where unaligned accesses aren't as simple.
- */
-
-/**
- * get_unaligned - get value from possibly mis-aligned location
- * @ptr: pointer to value
- *
- * This macro should be used for accessing values larger in size than
- * single bytes at locations that are expected to be improperly aligned,
- * e.g. retrieving a u16 value from a location not u16-aligned.
- *
- * Note that unaligned accesses can be very expensive on some architectures.
- */
-#define get_unaligned(ptr) (*(ptr))
-
-/**
- * put_unaligned - put value to a possibly mis-aligned location
- * @val: value to place
- * @ptr: pointer to location
- *
- * This macro should be used for placing values larger in size than
- * single bytes at locations that are expected to be improperly aligned,
- * e.g. writing a u16 value to a location not u16-aligned.
- *
- * Note that unaligned accesses can be very expensive on some architectures.
- */
-#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
-
-#endif
+++ /dev/null
-#ifndef _ASM_I386_UNISTD_H_
-#define _ASM_I386_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl 110
-#define __NR_vhangup 111
-#define __NR_idle 112
-#define __NR_vm86old 113
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_modify_ldt 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_vm86 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread 180
-#define __NR_pwrite 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-#define __NR_madvise1 219 /* delete when C lib stub is removed */
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-#define __NR_security 223 /* syscall for security modules */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_alloc_hugepages 250
-#define __NR_free_hugepages 251
-#define __NR_exit_group 252
-
-/* user-visible error numbers are in the range -1 - -124: see <asm-i386/errno.h> */
-
-#define __syscall_return(type, res) \
-do { \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
- errno = -(res); \
- res = -1; \
- } \
- return (type) (res); \
-} while (0)
-
-/* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
-#define _syscall0(type,name) \
-type name(void) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name)); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall1(type,name,type1,arg1) \
-type name(type1 arg1) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name),"b" ((long)(arg1))); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall2(type,name,type1,arg1,type2,arg2) \
-type name(type1 arg1,type2 arg2) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2))); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
-type name(type1 arg1,type2 arg2,type3 arg3) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
- "d" ((long)(arg3))); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
- "d" ((long)(arg3)),"S" ((long)(arg4))); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
- type5,arg5) \
-type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
-{ \
-long __res; \
-__asm__ volatile ("int $0x80" \
- : "=a" (__res) \
- : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
- "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \
-__syscall_return(type,__res); \
-}
-
-#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
- type5,arg5,type6,arg6) \
-type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,type6 arg6) \
-{ \
-long __res; \
-__asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; int $0x80 ; pop %%ebp" \
- : "=a" (__res) \
- : "i" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
- "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5)), \
- "0" ((long)(arg6))); \
-__syscall_return(type,__res); \
-}
-
-#ifdef __KERNEL_SYSCALLS__
-
-/*
- * we need this inline - forking from kernel space will result
- * in NO COPY ON WRITE (!!!), until an execve is executed. This
- * is no problem, but for the stack. This is handled by not letting
- * main() use the stack at all after fork(). Thus, no function
- * calls - which means inline code for fork too, as otherwise we
- * would use the stack upon exit from 'fork()'.
- *
- * Actually only pause and fork are needed inline, so that there
- * won't be any messing with the stack from main(), but we define
- * some others too.
- */
-#define __NR__exit __NR_exit
-static inline _syscall0(int,pause)
-static inline _syscall0(int,sync)
-static inline _syscall0(pid_t,setsid)
-static inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
-static inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
-static inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
-static inline _syscall1(int,dup,int,fd)
-static inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
-static inline _syscall3(int,open,const char *,file,int,flag,int,mode)
-static inline _syscall1(int,close,int,fd)
-static inline _syscall1(int,_exit,int,exitcode)
-static inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
-static inline _syscall1(int,delete_module,const char *,name)
-
-static inline pid_t wait(int * wait_stat)
-{
- return waitpid(-1,wait_stat,0);
-}
-
-#endif
-
-#endif /* _ASM_I386_UNISTD_H_ */
+++ /dev/null
-#ifndef _I386_USER_H
-#define _I386_USER_H
-
-#include <asm/page.h>
-#include <linux/ptrace.h>
-/* Core file format: The core file is written in such a way that gdb
- can understand it and provide useful information to the user (under
- linux we use the 'trad-core' bfd). There are quite a number of
- obstacles to being able to view the contents of the floating point
- registers, and until these are solved you will not be able to view the
- contents of them. Actually, you can read in the core file and look at
- the contents of the user struct to find out what the floating point
- registers contain.
- The actual file contents are as follows:
- UPAGE: 1 page consisting of a user struct that tells gdb what is present
- in the file. Directly after this is a copy of the task_struct, which
- is currently not used by gdb, but it may come in useful at some point.
- All of the registers are stored as part of the upage. The upage should
- always be only one page.
- DATA: The data area is stored. We use current->end_text to
- current->brk to pick up all of the user variables, plus any memory
- that may have been malloced. No attempt is made to determine if a page
- is demand-zero or if a page is totally unused, we just cover the entire
- range. All of the addresses are rounded in such a way that an integral
- number of pages is written.
- STACK: We need the stack information in order to get a meaningful
- backtrace. We need to write the data from (esp) to
- current->start_stack, so we round each of these off in order to be able
- to write an integer number of pages.
- The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/*
- * Pentium III FXSR, SSE support
- * Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
- * interacting with the FXSR-format floating point environment. Floating
- * point data can be accessed in the regular format in the usual manner,
- * and both the standard and SIMD floating point data can be accessed via
- * the new ptrace requests. In either case, changes to the FPU environment
- * will be reflected in the task's state as expected.
- */
-
-struct user_i387_struct {
- long cwd;
- long swd;
- long twd;
- long fip;
- long fcs;
- long foo;
- long fos;
- long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */
-};
-
-struct user_fxsr_struct {
- unsigned short cwd;
- unsigned short swd;
- unsigned short twd;
- unsigned short fop;
- long fip;
- long fcs;
- long foo;
- long fos;
- long mxcsr;
- long reserved;
- long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */
- long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */
- long padding[56];
-};
-
-/*
- * This is the old layout of "struct pt_regs", and
- * is still the layout used by user mode (the new
- * pt_regs doesn't have all registers as the kernel
- * doesn't use the extra segment registers)
- */
-struct user_regs_struct {
- long ebx, ecx, edx, esi, edi, ebp, eax;
- unsigned short ds, __ds, es, __es;
- unsigned short fs, __fs, gs, __gs;
- long orig_eax, eip;
- unsigned short cs, __cs;
- long eflags, esp;
- unsigned short ss, __ss;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
- this will be used by gdb to figure out where the data and stack segments
- are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
- from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
-/* ptrace does not yet supply these. Someday.... */
- int u_fpvalid; /* True if math co-processor being used. */
- /* for this mess. Not yet used. */
- struct user_i387_struct i387; /* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
- unsigned long int u_tsize; /* Text segment size (pages). */
- unsigned long int u_dsize; /* Data segment size (pages). */
- unsigned long int u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- This is actually the bottom of the stack,
- the top of the stack is always found in the
- esp register. */
- long int signal; /* Signal that caused the core dump. */
- int reserved; /* No longer used */
- struct user_pt_regs * u_ar0; /* Used by gdb to help find the values for */
- /* the registers. */
- struct user_i387_struct* u_fpstate; /* Math Co-processor pointer. */
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
- int u_debugreg[8];
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _I386_USER_H */
+++ /dev/null
-/*
- * Access to VGA videoram
- *
- * (c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
-
-/*
- * On the PC, we can just recalculate addresses and then
- * access the videoram directly without any black magic.
- */
-
-#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x)
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
-
-#endif
+++ /dev/null
-/*
- * include/asm-i386/xor.h
- *
- * Optimized RAID-5 checksumming functions for MMX and SSE.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * High-speed RAID5 checksumming functions utilizing MMX instructions.
- * Copyright (C) 1998 Ingo Molnar.
- */
-
-#define FPU_SAVE \
- do { \
- if (!(current->flags & PF_USEDFPU)) \
- __asm__ __volatile__ (" clts;\n"); \
- __asm__ __volatile__ ("fsave %0; fwait": "=m"(fpu_save[0])); \
- } while (0)
-
-#define FPU_RESTORE \
- do { \
- __asm__ __volatile__ ("frstor %0": : "m"(fpu_save[0])); \
- if (!(current->flags & PF_USEDFPU)) \
- stts(); \
- } while (0)
-
-#define LD(x,y) " movq 8*("#x")(%1), %%mm"#y" ;\n"
-#define ST(x,y) " movq %%mm"#y", 8*("#x")(%1) ;\n"
-#define XO1(x,y) " pxor 8*("#x")(%2), %%mm"#y" ;\n"
-#define XO2(x,y) " pxor 8*("#x")(%3), %%mm"#y" ;\n"
-#define XO3(x,y) " pxor 8*("#x")(%4), %%mm"#y" ;\n"
-#define XO4(x,y) " pxor 8*("#x")(%5), %%mm"#y" ;\n"
-
-
-static void
-xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
- unsigned long lines = bytes >> 7;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- ST(i,0) \
- XO1(i+1,1) \
- ST(i+1,1) \
- XO1(i+2,2) \
- ST(i+2,2) \
- XO1(i+3,3) \
- ST(i+3,3)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $128, %1 ;\n"
- " addl $128, %2 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2)
- :
- : "memory");
-
- FPU_RESTORE;
-}
-
-static void
-xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3)
-{
- unsigned long lines = bytes >> 7;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- ST(i,0) \
- XO2(i+1,1) \
- ST(i+1,1) \
- XO2(i+2,2) \
- ST(i+2,2) \
- XO2(i+3,3) \
- ST(i+3,3)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $128, %1 ;\n"
- " addl $128, %2 ;\n"
- " addl $128, %3 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- :
- : "memory");
-
- FPU_RESTORE;
-}
-
-static void
-xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4)
-{
- unsigned long lines = bytes >> 7;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- ST(i,0) \
- XO3(i+1,1) \
- ST(i+1,1) \
- XO3(i+2,2) \
- ST(i+2,2) \
- XO3(i+3,3) \
- ST(i+3,3)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $128, %1 ;\n"
- " addl $128, %2 ;\n"
- " addl $128, %3 ;\n"
- " addl $128, %4 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
- :
- : "memory");
-
- FPU_RESTORE;
-}
-
-
-static void
-xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
- unsigned long lines = bytes >> 7;
- char fpu_save[108];
-
- FPU_SAVE;
-
- /* need to save/restore p4/p5 manually otherwise gcc's 10 argument
- limit gets exceeded (+ counts as two arguments) */
- __asm__ __volatile__ (
- " pushl %4\n"
- " pushl %5\n"
-#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- XO4(i,0) \
- ST(i,0) \
- XO4(i+1,1) \
- ST(i+1,1) \
- XO4(i+2,2) \
- ST(i+2,2) \
- XO4(i+3,3) \
- ST(i+3,3)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $128, %1 ;\n"
- " addl $128, %2 ;\n"
- " addl $128, %3 ;\n"
- " addl $128, %4 ;\n"
- " addl $128, %5 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- " popl %5\n"
- " popl %4\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- : "r" (p4), "r" (p5)
- : "memory");
-
- FPU_RESTORE;
-}
-
-#undef LD
-#undef XO1
-#undef XO2
-#undef XO3
-#undef XO4
-#undef ST
-#undef BLOCK
-
-static void
-xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
- unsigned long lines = bytes >> 6;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
- " .align 32 ;\n"
- " 1: ;\n"
- " movq (%1), %%mm0 ;\n"
- " movq 8(%1), %%mm1 ;\n"
- " pxor (%2), %%mm0 ;\n"
- " movq 16(%1), %%mm2 ;\n"
- " movq %%mm0, (%1) ;\n"
- " pxor 8(%2), %%mm1 ;\n"
- " movq 24(%1), %%mm3 ;\n"
- " movq %%mm1, 8(%1) ;\n"
- " pxor 16(%2), %%mm2 ;\n"
- " movq 32(%1), %%mm4 ;\n"
- " movq %%mm2, 16(%1) ;\n"
- " pxor 24(%2), %%mm3 ;\n"
- " movq 40(%1), %%mm5 ;\n"
- " movq %%mm3, 24(%1) ;\n"
- " pxor 32(%2), %%mm4 ;\n"
- " movq 48(%1), %%mm6 ;\n"
- " movq %%mm4, 32(%1) ;\n"
- " pxor 40(%2), %%mm5 ;\n"
- " movq 56(%1), %%mm7 ;\n"
- " movq %%mm5, 40(%1) ;\n"
- " pxor 48(%2), %%mm6 ;\n"
- " pxor 56(%2), %%mm7 ;\n"
- " movq %%mm6, 48(%1) ;\n"
- " movq %%mm7, 56(%1) ;\n"
-
- " addl $64, %1 ;\n"
- " addl $64, %2 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2)
- :
- : "memory");
-
- FPU_RESTORE;
-}
-
-static void
-xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3)
-{
- unsigned long lines = bytes >> 6;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
- " .align 32,0x90 ;\n"
- " 1: ;\n"
- " movq (%1), %%mm0 ;\n"
- " movq 8(%1), %%mm1 ;\n"
- " pxor (%2), %%mm0 ;\n"
- " movq 16(%1), %%mm2 ;\n"
- " pxor 8(%2), %%mm1 ;\n"
- " pxor (%3), %%mm0 ;\n"
- " pxor 16(%2), %%mm2 ;\n"
- " movq %%mm0, (%1) ;\n"
- " pxor 8(%3), %%mm1 ;\n"
- " pxor 16(%3), %%mm2 ;\n"
- " movq 24(%1), %%mm3 ;\n"
- " movq %%mm1, 8(%1) ;\n"
- " movq 32(%1), %%mm4 ;\n"
- " movq 40(%1), %%mm5 ;\n"
- " pxor 24(%2), %%mm3 ;\n"
- " movq %%mm2, 16(%1) ;\n"
- " pxor 32(%2), %%mm4 ;\n"
- " pxor 24(%3), %%mm3 ;\n"
- " pxor 40(%2), %%mm5 ;\n"
- " movq %%mm3, 24(%1) ;\n"
- " pxor 32(%3), %%mm4 ;\n"
- " pxor 40(%3), %%mm5 ;\n"
- " movq 48(%1), %%mm6 ;\n"
- " movq %%mm4, 32(%1) ;\n"
- " movq 56(%1), %%mm7 ;\n"
- " pxor 48(%2), %%mm6 ;\n"
- " movq %%mm5, 40(%1) ;\n"
- " pxor 56(%2), %%mm7 ;\n"
- " pxor 48(%3), %%mm6 ;\n"
- " pxor 56(%3), %%mm7 ;\n"
- " movq %%mm6, 48(%1) ;\n"
- " movq %%mm7, 56(%1) ;\n"
-
- " addl $64, %1 ;\n"
- " addl $64, %2 ;\n"
- " addl $64, %3 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- :
- : "memory" );
-
- FPU_RESTORE;
-}
-
-static void
-xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4)
-{
- unsigned long lines = bytes >> 6;
- char fpu_save[108];
-
- FPU_SAVE;
-
- __asm__ __volatile__ (
- " .align 32,0x90 ;\n"
- " 1: ;\n"
- " movq (%1), %%mm0 ;\n"
- " movq 8(%1), %%mm1 ;\n"
- " pxor (%2), %%mm0 ;\n"
- " movq 16(%1), %%mm2 ;\n"
- " pxor 8(%2), %%mm1 ;\n"
- " pxor (%3), %%mm0 ;\n"
- " pxor 16(%2), %%mm2 ;\n"
- " pxor 8(%3), %%mm1 ;\n"
- " pxor (%4), %%mm0 ;\n"
- " movq 24(%1), %%mm3 ;\n"
- " pxor 16(%3), %%mm2 ;\n"
- " pxor 8(%4), %%mm1 ;\n"
- " movq %%mm0, (%1) ;\n"
- " movq 32(%1), %%mm4 ;\n"
- " pxor 24(%2), %%mm3 ;\n"
- " pxor 16(%4), %%mm2 ;\n"
- " movq %%mm1, 8(%1) ;\n"
- " movq 40(%1), %%mm5 ;\n"
- " pxor 32(%2), %%mm4 ;\n"
- " pxor 24(%3), %%mm3 ;\n"
- " movq %%mm2, 16(%1) ;\n"
- " pxor 40(%2), %%mm5 ;\n"
- " pxor 32(%3), %%mm4 ;\n"
- " pxor 24(%4), %%mm3 ;\n"
- " movq %%mm3, 24(%1) ;\n"
- " movq 56(%1), %%mm7 ;\n"
- " movq 48(%1), %%mm6 ;\n"
- " pxor 40(%3), %%mm5 ;\n"
- " pxor 32(%4), %%mm4 ;\n"
- " pxor 48(%2), %%mm6 ;\n"
- " movq %%mm4, 32(%1) ;\n"
- " pxor 56(%2), %%mm7 ;\n"
- " pxor 40(%4), %%mm5 ;\n"
- " pxor 48(%3), %%mm6 ;\n"
- " pxor 56(%3), %%mm7 ;\n"
- " movq %%mm5, 40(%1) ;\n"
- " pxor 48(%4), %%mm6 ;\n"
- " pxor 56(%4), %%mm7 ;\n"
- " movq %%mm6, 48(%1) ;\n"
- " movq %%mm7, 56(%1) ;\n"
-
- " addl $64, %1 ;\n"
- " addl $64, %2 ;\n"
- " addl $64, %3 ;\n"
- " addl $64, %4 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
- :
- : "memory");
-
- FPU_RESTORE;
-}
-
-static void
-xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
- unsigned long lines = bytes >> 6;
- char fpu_save[108];
-
- FPU_SAVE;
-
- /* need to save p4/p5 manually to not exceed gcc's 10 argument limit */
- __asm__ __volatile__ (
- " pushl %4\n"
- " pushl %5\n"
- " .align 32,0x90 ;\n"
- " 1: ;\n"
- " movq (%1), %%mm0 ;\n"
- " movq 8(%1), %%mm1 ;\n"
- " pxor (%2), %%mm0 ;\n"
- " pxor 8(%2), %%mm1 ;\n"
- " movq 16(%1), %%mm2 ;\n"
- " pxor (%3), %%mm0 ;\n"
- " pxor 8(%3), %%mm1 ;\n"
- " pxor 16(%2), %%mm2 ;\n"
- " pxor (%4), %%mm0 ;\n"
- " pxor 8(%4), %%mm1 ;\n"
- " pxor 16(%3), %%mm2 ;\n"
- " movq 24(%1), %%mm3 ;\n"
- " pxor (%5), %%mm0 ;\n"
- " pxor 8(%5), %%mm1 ;\n"
- " movq %%mm0, (%1) ;\n"
- " pxor 16(%4), %%mm2 ;\n"
- " pxor 24(%2), %%mm3 ;\n"
- " movq %%mm1, 8(%1) ;\n"
- " pxor 16(%5), %%mm2 ;\n"
- " pxor 24(%3), %%mm3 ;\n"
- " movq 32(%1), %%mm4 ;\n"
- " movq %%mm2, 16(%1) ;\n"
- " pxor 24(%4), %%mm3 ;\n"
- " pxor 32(%2), %%mm4 ;\n"
- " movq 40(%1), %%mm5 ;\n"
- " pxor 24(%5), %%mm3 ;\n"
- " pxor 32(%3), %%mm4 ;\n"
- " pxor 40(%2), %%mm5 ;\n"
- " movq %%mm3, 24(%1) ;\n"
- " pxor 32(%4), %%mm4 ;\n"
- " pxor 40(%3), %%mm5 ;\n"
- " movq 48(%1), %%mm6 ;\n"
- " movq 56(%1), %%mm7 ;\n"
- " pxor 32(%5), %%mm4 ;\n"
- " pxor 40(%4), %%mm5 ;\n"
- " pxor 48(%2), %%mm6 ;\n"
- " pxor 56(%2), %%mm7 ;\n"
- " movq %%mm4, 32(%1) ;\n"
- " pxor 48(%3), %%mm6 ;\n"
- " pxor 56(%3), %%mm7 ;\n"
- " pxor 40(%5), %%mm5 ;\n"
- " pxor 48(%4), %%mm6 ;\n"
- " pxor 56(%4), %%mm7 ;\n"
- " movq %%mm5, 40(%1) ;\n"
- " pxor 48(%5), %%mm6 ;\n"
- " pxor 56(%5), %%mm7 ;\n"
- " movq %%mm6, 48(%1) ;\n"
- " movq %%mm7, 56(%1) ;\n"
-
- " addl $64, %1 ;\n"
- " addl $64, %2 ;\n"
- " addl $64, %3 ;\n"
- " addl $64, %4 ;\n"
- " addl $64, %5 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- " popl %5\n"
- " popl %4\n"
- : "+g" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- : "r" (p4), "r" (p5)
- : "memory");
-
- FPU_RESTORE;
-}
-
-static struct xor_block_template xor_block_pII_mmx = {
- name: "pII_mmx",
- do_2: xor_pII_mmx_2,
- do_3: xor_pII_mmx_3,
- do_4: xor_pII_mmx_4,
- do_5: xor_pII_mmx_5,
-};
-
-static struct xor_block_template xor_block_p5_mmx = {
- name: "p5_mmx",
- do_2: xor_p5_mmx_2,
- do_3: xor_p5_mmx_3,
- do_4: xor_p5_mmx_4,
- do_5: xor_p5_mmx_5,
-};
-
-#undef FPU_SAVE
-#undef FPU_RESTORE
-
-/*
- * Cache avoiding checksumming functions utilizing KNI instructions
- * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
- */
-
-#define XMMS_SAVE \
- __asm__ __volatile__ ( \
- "movl %%cr0,%0 ;\n\t" \
- "clts ;\n\t" \
- "movups %%xmm0,(%1) ;\n\t" \
- "movups %%xmm1,0x10(%1) ;\n\t" \
- "movups %%xmm2,0x20(%1) ;\n\t" \
- "movups %%xmm3,0x30(%1) ;\n\t" \
- : "=&r" (cr0) \
- : "r" (xmm_save) \
- : "memory")
-
-#define XMMS_RESTORE \
- __asm__ __volatile__ ( \
- "sfence ;\n\t" \
- "movups (%1),%%xmm0 ;\n\t" \
- "movups 0x10(%1),%%xmm1 ;\n\t" \
- "movups 0x20(%1),%%xmm2 ;\n\t" \
- "movups 0x30(%1),%%xmm3 ;\n\t" \
- "movl %0,%%cr0 ;\n\t" \
- : \
- : "r" (cr0), "r" (xmm_save) \
- : "memory")
-
-#define ALIGN16 __attribute__((aligned(16)))
-
-#define OFFS(x) "16*("#x")"
-#define PF_OFFS(x) "256+16*("#x")"
-#define PF0(x) " prefetchnta "PF_OFFS(x)"(%1) ;\n"
-#define LD(x,y) " movaps "OFFS(x)"(%1), %%xmm"#y" ;\n"
-#define ST(x,y) " movaps %%xmm"#y", "OFFS(x)"(%1) ;\n"
-#define PF1(x) " prefetchnta "PF_OFFS(x)"(%2) ;\n"
-#define PF2(x) " prefetchnta "PF_OFFS(x)"(%3) ;\n"
-#define PF3(x) " prefetchnta "PF_OFFS(x)"(%4) ;\n"
-#define PF4(x) " prefetchnta "PF_OFFS(x)"(%5) ;\n"
-#define PF5(x) " prefetchnta "PF_OFFS(x)"(%6) ;\n"
-#define XO1(x,y) " xorps "OFFS(x)"(%2), %%xmm"#y" ;\n"
-#define XO2(x,y) " xorps "OFFS(x)"(%3), %%xmm"#y" ;\n"
-#define XO3(x,y) " xorps "OFFS(x)"(%4), %%xmm"#y" ;\n"
-#define XO4(x,y) " xorps "OFFS(x)"(%5), %%xmm"#y" ;\n"
-#define XO5(x,y) " xorps "OFFS(x)"(%6), %%xmm"#y" ;\n"
-
-
-static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
- unsigned long lines = bytes >> 8;
- char xmm_save[16*4] ALIGN16;
- int cr0;
-
- XMMS_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- PF1(i) \
- PF1(i+2) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF0(i+4) \
- PF0(i+6) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2)
- :
- : "memory");
-
- XMMS_RESTORE;
-}
-
-static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3)
-{
- unsigned long lines = bytes >> 8;
- char xmm_save[16*4] ALIGN16;
- int cr0;
-
- XMMS_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF2(i) \
- PF2(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r"(p2), "+r"(p3)
- :
- : "memory" );
-
- XMMS_RESTORE;
-}
-
-static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4)
-{
- unsigned long lines = bytes >> 8;
- char xmm_save[16*4] ALIGN16;
- int cr0;
-
- XMMS_SAVE;
-
- __asm__ __volatile__ (
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF2(i) \
- PF2(i+2) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- PF3(i) \
- PF3(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
- :
- : "memory" );
-
- XMMS_RESTORE;
-}
-
-static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
- unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
- unsigned long lines = bytes >> 8;
- char xmm_save[16*4] ALIGN16;
- int cr0;
-
- XMMS_SAVE;
-
- /* need to save p4/p5 manually to not exceed gcc's 10 argument limit */
- __asm__ __volatile__ (
- " pushl %4\n"
- " pushl %5\n"
-#undef BLOCK
-#define BLOCK(i) \
- PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF2(i) \
- PF2(i+2) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- PF3(i) \
- PF3(i+2) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- PF4(i) \
- PF4(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- XO4(i,0) \
- XO4(i+1,1) \
- XO4(i+2,2) \
- XO4(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
-
-
- PF0(0)
- PF0(2)
-
- " .align 32 ;\n"
- " 1: ;\n"
-
- BLOCK(0)
- BLOCK(4)
- BLOCK(8)
- BLOCK(12)
-
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " addl $256, %5 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
- " popl %5\n"
- " popl %4\n"
- : "+r" (lines),
- "+r" (p1), "+r" (p2), "+r" (p3)
- : "r" (p4), "r" (p5)
- : "memory");
-
- XMMS_RESTORE;
-}
-
-static struct xor_block_template xor_block_pIII_sse = {
- name: "pIII_sse",
- do_2: xor_sse_2,
- do_3: xor_sse_3,
- do_4: xor_sse_4,
- do_5: xor_sse_5,
-};
-
-/* Also try the generic routines. */
-#include <asm-generic/xor.h>
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES \
- do { \
- xor_speed(&xor_block_8regs); \
- xor_speed(&xor_block_32regs); \
- if (cpu_has_xmm) \
- xor_speed(&xor_block_pIII_sse); \
- if (md_cpu_has_mmx()) { \
- xor_speed(&xor_block_pII_mmx); \
- xor_speed(&xor_block_p5_mmx); \
- } \
- } while (0)
-
-/* We force the use of the SSE xor block because it can write around L2.
- We may also be able to load into the L1 only depending on how the cpu
- deals with a load to a line that is being prefetched. */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
- (cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
--- /dev/null
+# mkbuildtree <build tree>
+#
+# Creates symbolic links in <build tree> for the sparse tree
+# in the current directory.
+
+# Get absolute path to the destination directory
+pushd . >/dev/null
+cd ${1}
+D=`pwd`
+popd >/dev/null
+
+# Remove old copies of files and directories at the destination
+for i in `find -type f -o -type l` ; do rm -f ${D}/${i#./} ; done
+
+# Create symlinks of files and directories which exist in the sparse source
+lndir -silent -ignorelinks `pwd` ${D}
+rm -f ${D}/mkbuildtree
+
+## There are a whole bunch of special symlinks, mostly for files
+## which are identical in the i386 and xeno-i386 architecture-dependent
+## subdirectories.
+
+# This first symlink is special: it links to shared files in Xen's source tree
+ln -sf `pwd`/../xen/include/hypervisor-ifs ${D}/include/asm-xeno/hypervisor-ifs
+
+# The remainder are the i386 -> xeno-i386 links
+ln -sf ${D}/include/asm-i386/a.out.h ${D}/include/asm-xeno/a.out.h
+ln -sf ${D}/include/asm-i386/apicdef.h ${D}/include/asm-xeno/apicdef.h
+ln -sf ${D}/include/asm-i386/apic.h ${D}/include/asm-xeno/apic.h
+ln -sf ${D}/include/asm-i386/atomic.h ${D}/include/asm-xeno/atomic.h
+ln -sf ${D}/include/asm-i386/bitops.h ${D}/include/asm-xeno/bitops.h
+ln -sf ${D}/include/asm-i386/boot.h ${D}/include/asm-xeno/boot.h
+ln -sf ${D}/include/asm-i386/byteorder.h ${D}/include/asm-xeno/byteorder.h
+ln -sf ${D}/include/asm-i386/cache.h ${D}/include/asm-xeno/cache.h
+ln -sf ${D}/include/asm-i386/checksum.h ${D}/include/asm-xeno/checksum.h
+ln -sf ${D}/include/asm-i386/cpufeature.h ${D}/include/asm-xeno/cpufeature.h
+ln -sf ${D}/include/asm-i386/current.h ${D}/include/asm-xeno/current.h
+ln -sf ${D}/include/asm-i386/debugreg.h ${D}/include/asm-xeno/debugreg.h
+ln -sf ${D}/include/asm-i386/delay.h ${D}/include/asm-xeno/delay.h
+ln -sf ${D}/include/asm-i386/div64.h ${D}/include/asm-xeno/div64.h
+ln -sf ${D}/include/asm-i386/dma.h ${D}/include/asm-xeno/dma.h
+ln -sf ${D}/include/asm-i386/elf.h ${D}/include/asm-xeno/elf.h
+ln -sf ${D}/include/asm-i386/errno.h ${D}/include/asm-xeno/errno.h
+ln -sf ${D}/include/asm-i386/fcntl.h ${D}/include/asm-xeno/fcntl.h
+ln -sf ${D}/include/asm-i386/floppy.h ${D}/include/asm-xeno/floppy.h
+ln -sf ${D}/include/asm-i386/hardirq.h ${D}/include/asm-xeno/hardirq.h
+ln -sf ${D}/include/asm-i386/hdreg.h ${D}/include/asm-xeno/hdreg.h
+ln -sf ${D}/include/asm-i386/i387.h ${D}/include/asm-xeno/i387.h
+ln -sf ${D}/include/asm-i386/ide.h ${D}/include/asm-xeno/ide.h
+ln -sf ${D}/include/asm-i386/init.h ${D}/include/asm-xeno/init.h
+ln -sf ${D}/include/asm-i386/io_apic.h ${D}/include/asm-xeno/io_apic.h
+ln -sf ${D}/include/asm-i386/ioctl.h ${D}/include/asm-xeno/ioctl.h
+ln -sf ${D}/include/asm-i386/ioctls.h ${D}/include/asm-xeno/ioctls.h
+ln -sf ${D}/include/asm-i386/ipcbuf.h ${D}/include/asm-xeno/ipcbuf.h
+ln -sf ${D}/include/asm-i386/ipc.h ${D}/include/asm-xeno/ipc.h
+ln -sf ${D}/include/asm-i386/keyboard.h ${D}/include/asm-xeno/keyboard.h
+ln -sf ${D}/include/asm-i386/kmap_types.h ${D}/include/asm-xeno/kmap_types.h
+ln -sf ${D}/include/asm-i386/ldt.h ${D}/include/asm-xeno/ldt.h
+ln -sf ${D}/include/asm-i386/linux_logo.h ${D}/include/asm-xeno/linux_logo.h
+ln -sf ${D}/include/asm-i386/locks.h ${D}/include/asm-xeno/locks.h
+ln -sf ${D}/include/asm-i386/math_emu.h ${D}/include/asm-xeno/math_emu.h
+ln -sf ${D}/include/asm-i386/mc146818rtc.h ${D}/include/asm-xeno/mc146818rtc.h
+ln -sf ${D}/include/asm-i386/mca_dma.h ${D}/include/asm-xeno/mca_dma.h
+ln -sf ${D}/include/asm-i386/mman.h ${D}/include/asm-xeno/mman.h
+ln -sf ${D}/include/asm-i386/mmx.h ${D}/include/asm-xeno/mmx.h
+ln -sf ${D}/include/asm-i386/module.h ${D}/include/asm-xeno/module.h
+ln -sf ${D}/include/asm-i386/mpspec.h ${D}/include/asm-xeno/mpspec.h
+ln -sf ${D}/include/asm-i386/msgbuf.h ${D}/include/asm-xeno/msgbuf.h
+ln -sf ${D}/include/asm-i386/msr.h ${D}/include/asm-xeno/msr.h
+ln -sf ${D}/include/asm-i386/mtrr.h ${D}/include/asm-xeno/mtrr.h
+ln -sf ${D}/include/asm-i386/namei.h ${D}/include/asm-xeno/namei.h
+ln -sf ${D}/include/asm-i386/param.h ${D}/include/asm-xeno/param.h
+ln -sf ${D}/include/asm-i386/parport.h ${D}/include/asm-xeno/parport.h
+ln -sf ${D}/include/asm-i386/poll.h ${D}/include/asm-xeno/poll.h
+ln -sf ${D}/include/asm-i386/posix_types.h ${D}/include/asm-xeno/posix_types.h
+ln -sf ${D}/include/asm-i386/resource.h ${D}/include/asm-xeno/resource.h
+ln -sf ${D}/include/asm-i386/rwlock.h ${D}/include/asm-xeno/rwlock.h
+ln -sf ${D}/include/asm-i386/rwsem.h ${D}/include/asm-xeno/rwsem.h
+ln -sf ${D}/include/asm-i386/scatterlist.h ${D}/include/asm-xeno/scatterlist.h
+ln -sf ${D}/include/asm-i386/semaphore.h ${D}/include/asm-xeno/semaphore.h
+ln -sf ${D}/include/asm-i386/sembuf.h ${D}/include/asm-xeno/sembuf.h
+ln -sf ${D}/include/asm-i386/serial.h ${D}/include/asm-xeno/serial.h
+ln -sf ${D}/include/asm-i386/setup.h ${D}/include/asm-xeno/setup.h
+ln -sf ${D}/include/asm-i386/shmbuf.h ${D}/include/asm-xeno/shmbuf.h
+ln -sf ${D}/include/asm-i386/shmparam.h ${D}/include/asm-xeno/shmparam.h
+ln -sf ${D}/include/asm-i386/sigcontext.h ${D}/include/asm-xeno/sigcontext.h
+ln -sf ${D}/include/asm-i386/siginfo.h ${D}/include/asm-xeno/siginfo.h
+ln -sf ${D}/include/asm-i386/signal.h ${D}/include/asm-xeno/signal.h
+ln -sf ${D}/include/asm-i386/smplock.h ${D}/include/asm-xeno/smplock.h
+ln -sf ${D}/include/asm-i386/socket.h ${D}/include/asm-xeno/socket.h
+ln -sf ${D}/include/asm-i386/sockios.h ${D}/include/asm-xeno/sockios.h
+ln -sf ${D}/include/asm-i386/softirq.h ${D}/include/asm-xeno/softirq.h
+ln -sf ${D}/include/asm-i386/spinlock.h ${D}/include/asm-xeno/spinlock.h
+ln -sf ${D}/include/asm-i386/statfs.h ${D}/include/asm-xeno/statfs.h
+ln -sf ${D}/include/asm-i386/stat.h ${D}/include/asm-xeno/stat.h
+ln -sf ${D}/include/asm-i386/string-486.h ${D}/include/asm-xeno/string-486.h
+ln -sf ${D}/include/asm-i386/string.h ${D}/include/asm-xeno/string.h
+ln -sf ${D}/include/asm-i386/termbits.h ${D}/include/asm-xeno/termbits.h
+ln -sf ${D}/include/asm-i386/termios.h ${D}/include/asm-xeno/termios.h
+ln -sf ${D}/include/asm-i386/timex.h ${D}/include/asm-xeno/timex.h
+ln -sf ${D}/include/asm-i386/tlb.h ${D}/include/asm-xeno/tlb.h
+ln -sf ${D}/include/asm-i386/types.h ${D}/include/asm-xeno/types.h
+ln -sf ${D}/include/asm-i386/uaccess.h ${D}/include/asm-xeno/uaccess.h
+ln -sf ${D}/include/asm-i386/ucontext.h ${D}/include/asm-xeno/ucontext.h
+ln -sf ${D}/include/asm-i386/unaligned.h ${D}/include/asm-xeno/unaligned.h
+ln -sf ${D}/include/asm-i386/unistd.h ${D}/include/asm-xeno/unistd.h
+ln -sf ${D}/include/asm-i386/user.h ${D}/include/asm-xeno/user.h
+ln -sf ${D}/include/asm-i386/vga.h ${D}/include/asm-xeno/vga.h
+ln -sf ${D}/include/asm-i386/xor.h ${D}/include/asm-xeno/xor.h
+ln -sf ${D}/arch/i386/kernel/init_task.c ${D}/arch/xeno/kernel/init_task.c
+ln -sf ${D}/arch/i386/kernel/ptrace.c ${D}/arch/xeno/kernel/ptrace.c
+ln -sf ${D}/arch/i386/kernel/semaphore.c ${D}/arch/xeno/kernel/semaphore.c
+ln -sf ${D}/arch/i386/kernel/sys_i386.c ${D}/arch/xeno/kernel/sys_i386.c
+ln -sf ${D}/arch/i386/lib/checksum.S ${D}/arch/xeno/lib/checksum.S
+ln -sf ${D}/arch/i386/lib/dec_and_lock.c ${D}/arch/xeno/lib/dec_and_lock.c
+ln -sf ${D}/arch/i386/lib/getuser.S ${D}/arch/xeno/lib/getuser.S
+ln -sf ${D}/arch/i386/lib/iodebug.c ${D}/arch/xeno/lib/iodebug.c
+ln -sf ${D}/arch/i386/lib/memcpy.c ${D}/arch/xeno/lib/memcpy.c
+ln -sf ${D}/arch/i386/lib/mmx.c ${D}/arch/xeno/lib/mmx.c
+ln -sf ${D}/arch/i386/lib/old-checksum.c ${D}/arch/xeno/lib/old-checksum.c
+ln -sf ${D}/arch/i386/lib/strstr.c ${D}/arch/xeno/lib/strstr.c
+ln -sf ${D}/arch/i386/lib/usercopy.c ${D}/arch/xeno/lib/usercopy.c
+ln -sf ${D}/arch/i386/mm/extable.c ${D}/arch/xeno/mm/extable.c
+ln -sf ${D}/arch/i386/mm/pageattr.c ${D}/arch/xeno/mm/pageattr.c
projects / xen.git / commitdiff